MudmotorTalk.com
http://www.mudmotortalk.com/mmt_v2/

Sanding for Gator Glide
http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=66477		 Page 1 of 1
Author:  gurt2140 [ Wed Apr 06, 2016 8:28 am ]
Post subject:  Sanding for Gator Glide
I am fixing to do my first gator glide application. How difficult is it going to be to sand the paint off of the bottom of the hull? The paint on there now is not very worn. Also any tips on what is best to use to sand the paint off first.
Author:  HOTSAUCE170 [ Wed Apr 06, 2016 8:48 am ]
Post subject:  Re: Sanding for Gator Glide
Just take the boat to a harrowed up field unload it and drag it behind the truck. :lol:

get a palm sander and go to town on the bottom then wipe down a couple of times with acetone.
Author:  gurt2140 [ Wed Apr 06, 2016 10:23 am ]
Post subject:  Re: Sanding for Gator Glide
Author:  BassmasterCia [ Wed Apr 06, 2016 4:04 pm ]
Post subject:  Re: Sanding for Gator Glide
Not kidding about this. Get a shitty prop and jump a few small sand bars. You will be amazed how fast paint comes off
Author:  flint87 [ Wed Apr 06, 2016 4:07 pm ]
Post subject:  Re: Sanding for Gator Glide
Author:  SETx Longtail [ Wed Apr 06, 2016 9:05 pm ]
Post subject:  Re: Sanding for Gator Glide
I had the bottom of my boat left unpainted when it was built. When I did my GG I dunked some scotch brite in acetone and gave it a rub-down. Worked perfect.
Author:  gurt2140 [ Thu Apr 07, 2016 7:28 am ]
Post subject:  Re: Sanding for Gator Glide
Author:  gauge306 [ Thu Apr 14, 2016 2:54 pm ]
Post subject:  Re: Sanding for Gator Glide
Call GG and ask, got step by step instructions and it worked great!
Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/