| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| If u were?? http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=6970 |
Page 1 of 1 |
| Author: | instagator911 [ Thu Jan 07, 2010 4:20 pm ] |
| Post subject: | If u were?? |
If u were 2 build a boat for 25 HP sd max " like what some fed uints are alowing for next year." what would u build. it would be talored mostly fer the gulf coast marsh with little 2 no stumps or wood. Im fixing 2 build one and looking 2 see what works best or what people like as far as size, style, and gage. |
|
| Author: | Full Throttle [ Thu Jan 07, 2010 4:28 pm ] |
| Post subject: | Re: If u were?? |
I would build a .125 1748 bare bones without a bunch of extra weight.... |
|
| Author: | Quackiller08 [ Thu Jan 07, 2010 4:59 pm ] |
| Post subject: | Re: If u were?? |
go narrow 17/44 pod seat,grab bar , 3 ft deck, and floor |
|
| Author: | dead animal [ Thu Jan 07, 2010 5:22 pm ] |
| Post subject: | Re: If u were?? |
i ran a 25kholer on a 20'x44'' skiff for a long time. it will run mid 20's empty and run 20ish loaded for bidness. a 18x48'' boat would do fine as well. just don't get stupid with options/crap in the boat and u'll be fine. good luck |
|
| Author: | Crews [ Thu Jan 07, 2010 5:58 pm ] |
| Post subject: | Re: If u were?? |
if you were worried about carrying a load, I had a 27 on a 20x38 .125 square chine boat that would haul a serious load for a small motor, and ran in the mid 20's. if you're only going to carry 2 other guys and hunting gear at most, a 17x48 .125 square chine boat with no extra boxes full of crap always worked really well for me, with the 27/25 hp Kohler. |
|
| Author: | coondik [ Thu Jan 07, 2010 8:03 pm ] |
| Post subject: | Re: If u were?? |
i had a 27 on a 16'X54" (all 1/8") dat did purdy good. wasn't a speed demon, but it handled a decent load purdy good. either ya go short & fat or long & skinny! |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|