It is currently Thu Mar 28, 2024 6:56 pm




Reply to topic  [ 81 posts ]  Go to page 1, 2, 3  Next
 The Time Has Come- custom build. 
Author Message
MMT 1000 Club
User avatar

Joined: Sun Jun 10, 2012 7:12 pm
Posts: 2305
Post The Time Has Come- custom build.
I am now completely retired from the Army, no more year long deployments and no more having to move every couple years. I am having a custom mud hull built exactly the way I want it.

Having read the threads on MMT for years, I have been highly impressed at the comments and praise Uncle J gets on his builds. I reached out to him, and he not only was ready to do a build, he offered me a military discount that he claimed I would not be able to turn down. He was right, and now we are on our way.

It is going to be an 18x54 Pointed Bow Bateau with 22 inch sides, 5 foot deck with 3/16 gauge hull. It will have removable bow fishing rails, two rod boxes, and will have custom paint and hydro turf installed.

I spoke with Russ (here on MMT), and he gave me metric crap tons of good advice. It was actually cool to find out that Russ and I have chewed some of the same dirt in the military and have done some of the same shooting competitions.

The boat is going to be multi purpose, and will do as much fishing, bow fishing, trapping, and possible coon hunting as it will waterfowl hunting.

I debated myself long and hard on what motor. One day I was sure it would be a 37 EFI Gator Tail, then the next day I was back to looking at the Pro Drive, and considering the Mud Buddy. Russ dropped some very good advice on me. He told me to wait on the mud motor, and just start out with a four stroke outboard. I thought on it, and I think he gave very sound advice.

Right now I am living in NW Arkansas. There is no mud were I am at. Would have to run over to Oklahoma to get into any, or hit mud when we routinely travel back home to Alabama. I am close to Beaver Lake, and it is all hard gravel and sand. Starting out with an outboard makes much sense. When my youngest daughter graduates high school, we will most likely move back to the deep south.

I am about 95% sure that I am going to get a brand new Tohatsu 50 HP four stoke. I believe it will serve me well, and I also believe I will still have much use for it when I do decide on a mud motor.

The good thing about waiting on the Mud Motor is that there seems to be much technology leaps and bounds every few years. Who knows what radical new change will hit the mud motor builds in the next few years. I may also keep my eye open for good used mud motors in the event that I am heading some where that I would be using it.

I am stoked about getting the boat built and getting out on the water. My wife is as excited, and likes to fish as much or more than I do.

Now I need to start looking for a young Labrador to train.

_________________
Uncle J 18x54

Gator Tail XD 37 EFI -Delta Performance Level 3


Tue Apr 04, 2017 8:16 pm
Profile
MMT 1000 Club
User avatar

Joined: Sun Jan 25, 2009 8:09 pm
Posts: 1268
Location: North Texas
Post The Time Has Come- custom build.
Congrats Ranger! Thank you for your many years of service to our great country[THUMBS UP SIGN] I hope you get to spend the rest of your years up in Mallard country. I met Mudslinger at Mighty White Marine in Augusta AR when I bought his used GTR last week.

They are a dealer for gtr, tahatsu, Yamaha and more. It was a really nice place and their service was top notch. Shandon is the owner and couldn't have been more helpful. You may want to check them out for your motor. Enjoy that new ride.

_________________
WC Custom 1854


Wed Apr 05, 2017 6:15 am
Profile WWW
MMT 1000 Club
User avatar

Joined: Thu Jan 31, 2013 5:42 pm
Posts: 1913
Location: Conroe tx
Post Re: The Time Has Com- custom build.
I'm glad your getting your rig together . Props to uncle j , for giving back . Thanks for your career of service sir! Would like to see you at one if these rides one day. Semper

H Finn

_________________
Ole black water keep on rolling

18x54 Uncle J -GTR - with the koolaid
Back H2o SWOMP 23 SS stage 2 15x36 GD Duck Skiff GATOR
GATOR GLIDE PROSTAFF
BACKWATER PROSTAFF
http://www.gatorglide.com

Coupe rest in peace brother


Wed Apr 05, 2017 6:39 am
Profile
MMT 1000 Club
User avatar

Joined: Sun Jun 10, 2012 7:12 pm
Posts: 2305
Post Re: The Time Has Come- custom build.
I would love to do the Caddo run. My new work schedule and time to build the new boat get a vote.

_________________
Uncle J 18x54

Gator Tail XD 37 EFI -Delta Performance Level 3


Wed Apr 05, 2017 8:19 am
Profile
MMT Super Elite Member

Joined: Fri Dec 18, 2009 8:10 pm
Posts: 16915
Location: Rowlett, TX
Post Re: The Time Has Come- custom build.
We'd love to have you if you can make it.


Wed Apr 05, 2017 12:19 pm
Profile
MMT 1000 Club

Joined: Mon Dec 31, 2012 11:07 pm
Posts: 4820
Location: West Monroe, LA
Post Re: The Time Has Come- custom build.
No boat isn't a problem. I've made the last 2 runs without one. Someone will let y'all hitch a ride. No one believes I even have a boat as they haven't ever seen it. Lol


Wed Apr 05, 2017 1:01 pm
Profile
MMT 1000 Club
User avatar

Joined: Thu Jan 31, 2013 5:42 pm
Posts: 1913
Location: Conroe tx
Post Re: The Time Has Come- custom build.
Plenty of rigs to ride in, come on down, well treat you like family!!

H Finn

_________________
Ole black water keep on rolling

18x54 Uncle J -GTR - with the koolaid
Back H2o SWOMP 23 SS stage 2 15x36 GD Duck Skiff GATOR
GATOR GLIDE PROSTAFF
BACKWATER PROSTAFF
http://www.gatorglide.com

Coupe rest in peace brother


Wed Apr 05, 2017 1:43 pm
Profile
MMT 1000 Club

Joined: Mon Dec 31, 2012 11:07 pm
Posts: 4820
Location: West Monroe, LA
Post Re: The Time Has Come- custom build.
Huck will even let you borrow that shake weight.....


Wed Apr 05, 2017 4:08 pm
Profile
MMT 1000 Club
User avatar

Joined: Wed Jan 02, 2013 12:59 pm
Posts: 1793
Location: Clear Lake, Tx
Post Re: The Time Has Come- custom build.
Very happy for ya brother. God bless ya for your service!

Sent from my SM-G930V using Tapatalk


Wed Apr 05, 2017 4:25 pm
Profile WWW
MMT 1000 Club
User avatar

Joined: Sun Jun 10, 2012 7:12 pm
Posts: 2305
Post Re: The Time Has Come- custom build.
It would be nice to actually meet folks face to face that I have conversed with for years.

You all get my buddy Dean Guidry to show up, and I will be sure to show.

_________________
Uncle J 18x54

Gator Tail XD 37 EFI -Delta Performance Level 3


Wed Apr 05, 2017 7:16 pm
Profile
MMT 1000 Club

Joined: Mon Dec 31, 2012 11:07 pm
Posts: 4820
Location: West Monroe, LA
Post Re: The Time Has Come- custom build.
He's not invited.....


Wed Apr 05, 2017 7:56 pm
Profile
MMT Super Elite Member

Joined: Fri Dec 18, 2009 8:10 pm
Posts: 16915
Location: Rowlett, TX
Post Re: The Time Has Come- custom build.
^^

Sent from my SM-T710 using Tapatalk


Wed Apr 05, 2017 9:23 pm
Profile
MMT 1000 Club
User avatar

Joined: Sun Jun 10, 2012 7:12 pm
Posts: 2305
Post Re: The Time Has Come- custom build.
I will plan to show up anyway.

_________________
Uncle J 18x54

Gator Tail XD 37 EFI -Delta Performance Level 3


Wed Apr 05, 2017 9:26 pm
Profile
MMT Super Elite Member

Joined: Fri Dec 18, 2009 8:10 pm
Posts: 16915
Location: Rowlett, TX
Post Re: The Time Has Come- custom build.
Russ may be able to help you find a spot to crash. Give me a shout if you need to.

Sent from my SM-T710 using Tapatalk


Wed Apr 05, 2017 9:31 pm
Profile
MMT Addict

Joined: Wed Mar 16, 2011 2:35 pm
Posts: 608
Location: Deerfield Beach FL,
Post Re: The Time Has Come- custom build.
Thank you for your service and enjoy the new boat.


Sent from my iPad using Tapatalk

_________________
Swomp 35 on an 1848 Alumitec Custom


Thu Apr 06, 2017 4:40 am
Profile
MMT 1000 Club

Joined: Mon Jan 09, 2012 8:56 pm
Posts: 2623
Location: Minnesota
Post Re: The Time Has Come- custom build.
Good deal. Post up some pictures as the build progresses. How far out is he for delivery these days?

_________________
1754 Gator Trax Hybrid Hunt Deck with GTR35


Fri Apr 07, 2017 2:49 pm
Profile
MMT 1000 Club
User avatar

Joined: Sun Jun 10, 2012 7:12 pm
Posts: 2305
Post Re: The Time Has Come- custom build.
I am trying not to ask him on progress. I figured every minute taking pics or texting me is time not welding.

I am curious to see it come along. I will post pics when they come.

_________________
Uncle J 18x54

Gator Tail XD 37 EFI -Delta Performance Level 3


Fri Apr 07, 2017 8:06 pm
Profile
MMT 1000 Club
User avatar

Joined: Fri Apr 06, 2012 8:48 am
Posts: 3161
Location: Alabama
Post Re: The Time Has Come- custom build.
Good to hear you are retired you might won't to think about a 70hp and a jackplate shallow water and carrying a heavy load you won't regret it.

Sent from my LG-D800 using Tapatalk

_________________
Twenty years from now you will be more disappointed by the things that you didn't do than by the ones you did do. So throw off the bowlines. Sail away from the safe harbor. Catch the trade winds in your sails. Explore. Dream. Discover.
- Mark Twain


Sat Apr 08, 2017 4:14 pm
Profile
MMT 1000 Club
User avatar

Joined: Sun Jun 10, 2012 7:12 pm
Posts: 2305
Post Re: The Time Has Come- custom build.
Should be days away from Uncle J starting on my boat.

Went to Academy today and got trolling motor, battery, anchor and line, horn, fire extinguisher, life vests, a Magellan 50 qt cooler, and a few other things.

Now I just need to make the final decision on my motor.

I am ready to put all this stuff to use. Still need to get my bow fishing lights.

_________________
Uncle J 18x54

Gator Tail XD 37 EFI -Delta Performance Level 3


Tue May 16, 2017 6:22 pm
Profile
MMT 1000 Club

Joined: Sun Sep 01, 2013 2:53 pm
Posts: 3480
Location: Hardin County, Tx
Post Re: The Time Has Come- custom build.
Most definitely let me know how that Magellan cooler works out. Shouldn't be long now!!!

_________________
#CFFITR

-Custom pool noodle
-stage 4 water wings


Tue May 16, 2017 7:40 pm
Profile
MMT 1000 Club
User avatar

Joined: Sun Jun 10, 2012 7:12 pm
Posts: 2305
Post Re: The Time Has Come- custom build.
I did some research and the original Magellan coolers had some issues with the lids warping. It is my understanding that they fixed the problem.

Heck with all the money I am sinking into the boat and motor, I should have just splurged and got the Yetti.

_________________
Uncle J 18x54

Gator Tail XD 37 EFI -Delta Performance Level 3


Tue May 16, 2017 8:38 pm
Profile
MMT Super Elite Member

Joined: Fri Dec 18, 2009 8:10 pm
Posts: 16915
Location: Rowlett, TX
Post Re: The Time Has Come- custom build.
I wouldn't spend the money on a yeti. You can get the rtic's cheap still until they're completely shut down. You can also pick up the blemished orca's and k2's cheap. Igloo also has a sportsmans model thats rotomolded. I've used all those with good luck.

Sent from my SM-T710 using Tapatalk


Tue May 16, 2017 9:12 pm
Profile
MMT Pro Member

Joined: Tue Dec 21, 2010 10:16 am
Posts: 92
Post Re: The Time Has Come- custom build.
ranger I should have room on a boat and possible place to stay.send me a pm if needed.


Wed May 17, 2017 3:18 am
Profile
MMT 1000 Club
User avatar

Joined: Fri Jan 23, 2009 1:27 pm
Posts: 1095
Location: SW Michigan
Post Re: The Time Has Come- custom build.
Thank you for your service and congrats on the new rig! :) :)

_________________
1854 Prodigy Open
HDR/Stage 3 mods
Prodigy Boats Pro Staff
BPS Swamp Staff Member
Blackwater Marine LLC.


Quote classic by rangerp: "Red seemed to be enjoying herself, and I assume by the look on her face was about to hit the high-note and throw a locate as she treed the possum."


Wed May 17, 2017 4:33 am
Profile
MMT Member
User avatar

Joined: Sun Jan 22, 2017 8:45 pm
Posts: 26
Location: Montgomery TX
Post Re: The Time Has Come- custom build.
Congrats and thank you for your service. I hear uncle J makes a great Rig. I myself just picked up my first boat. I had Chad at Prodigy build mine and went with the mud buddy. I bounced all around on the motor as well and landed on the mud buddy. They are definitely different to drive. I had mine on the lake in a chop w me and 3 adults and a child w a cooler and did 28 mph. Many congrats again. Hey. I'm a old coon hunter myself and sure did love listening to those hounds. Keep us updated w pics


Sent from my iPhone using Tapatalk

_________________
All men die, but few really live!
~William Wallace~


Sat May 20, 2017 8:34 pm
Profile
MMT 1000 Club
User avatar

Joined: Sun Jun 10, 2012 7:12 pm
Posts: 2305
Post Re: The Time Has Come- custom build.
The build has started.


You do not have the required permissions to view the files attached to this post.

_________________
Uncle J 18x54

Gator Tail XD 37 EFI -Delta Performance Level 3


Thu May 25, 2017 9:29 pm
Profile
MMT 1000 Club

Joined: Thu May 23, 2013 4:24 pm
Posts: 2912
Location: Thibodaux, La
Post Re: The Time Has Come- custom build.

_________________
1850 Predator Series Stick Steer Option
40HP Gatortail


Thu May 25, 2017 9:35 pm
Profile WWW
MMT 1000 Club
User avatar

Joined: Wed Feb 09, 2011 1:56 pm
Posts: 1646
Location: Chauvin
Post Re: The Time Has Come- custom build.
Very nice!! You won't get any sleep now!! :lol:

Sent from my SAMSUNG-SM-G935A using Tapatalk


Fri May 26, 2017 8:19 am
Profile
MMT 1000 Club
User avatar

Joined: Sun Jun 10, 2012 7:12 pm
Posts: 2305
Post Re: The Time Has Come- custom build.
The build continues. I need to pick out my paint scheme pretty soon.


You do not have the required permissions to view the files attached to this post.

_________________
Uncle J 18x54

Gator Tail XD 37 EFI -Delta Performance Level 3


Fri Jun 02, 2017 8:54 pm
Profile
MMT 1000 Club

Joined: Sun Sep 01, 2013 2:53 pm
Posts: 3480
Location: Hardin County, Tx
Post Re: The Time Has Come- custom build.
That looks sharp enough to cut yourself on. Congrats brother!

I'd look into some of the hardwood and bottomland type patterns for where you're at. Do something different ;)

_________________
#CFFITR

-Custom pool noodle
-stage 4 water wings


Sat Jun 03, 2017 3:47 am
Profile
MMT 1000 Club
User avatar

Joined: Sun Jun 10, 2012 7:12 pm
Posts: 2305
Post Re: The Time Has Come- custom build.
I want military multicam pattern with a green 3/75 Ranger scroll on the side. Somehow I am doubting that will be a viable option.


You do not have the required permissions to view the files attached to this post.

_________________
Uncle J 18x54

Gator Tail XD 37 EFI -Delta Performance Level 3


Sat Jun 03, 2017 6:07 pm
Profile
MMT 1000 Club
User avatar

Joined: Sun Jun 10, 2012 7:12 pm
Posts: 2305
Post Re: The Time Has Come- custom build.
If they can paint a car this color, I am betting it can go on a boat.


You do not have the required permissions to view the files attached to this post.

_________________
Uncle J 18x54

Gator Tail XD 37 EFI -Delta Performance Level 3


Sat Jun 03, 2017 6:11 pm
Profile
MMT 1000 Club

Joined: Sun Dec 14, 2014 2:21 pm
Posts: 3214
Post Re: The Time Has Come- custom build.
I dig the paint scheme. I bet you could have vinyl decals made for the ranger scroll. Probly even something a little tougher for the abuse a duck boat takes.


Sent from my iPhone using Tapatalk


Sat Jun 03, 2017 6:17 pm
Profile
MMT 1000 Club

Joined: Sun Dec 14, 2014 2:21 pm
Posts: 3214
Post Re: The Time Has Come- custom build.
They sell stencil kits for the multicam. I just googled it


Sent from my iPhone using Tapatalk


Sat Jun 03, 2017 6:19 pm
Profile
MMT Elite Member

Joined: Wed Jan 14, 2009 8:25 am
Posts: 6432
Location: the dark side of the moon
Post The Time Has Come- custom build.
Terrain phantom has a multicam style stencil


Sent from my iPhone using Tapatalk

_________________
1850 & 36pd


Sat Jun 03, 2017 6:30 pm
Profile
MMT 1000 Club
User avatar

Joined: Sun Jun 10, 2012 7:12 pm
Posts: 2305
Post Re: The Time Has Come- custom build.
The only multicam stencils I can find are the smaller pattern more for firearms. I have not seen any of the bigger ones for vehicles and such.

_________________
Uncle J 18x54

Gator Tail XD 37 EFI -Delta Performance Level 3


Sun Jun 04, 2017 1:12 pm
Profile
MMT Pro Member

Joined: Sat Nov 09, 2013 6:44 pm
Posts: 335
Post Re: The Time Has Come- custom build.
Depending on how hardcore you want to get, you could probably transfer an image of multicam to Mylar sheets with a exacto knife and an hour or two, thus making your own stencil.


Sent from my iPhone using Tapatalk

_________________
"There's nothing a duck hunter hates more than another duck hunter."


Sun Jun 04, 2017 7:16 pm
Profile
MMT 1000 Club
User avatar

Joined: Sun Jun 10, 2012 7:12 pm
Posts: 2305
Post Re: The Time Has Come- custom build.
Uncle J contacted me today and said that his painter dude was able to replicate the pictures of the multicam I sent him.

We may never catch a fish or kill a duck, but we are about to take sexy to a whole new level out in the backwaters.

I am stoked about seeing this thing when it is done. It seems like time has gone in reverse these last two weeks.

_________________
Uncle J 18x54

Gator Tail XD 37 EFI -Delta Performance Level 3


Thu Jun 08, 2017 11:36 pm
Profile
MMT 1000 Club
User avatar

Joined: Sun Jun 10, 2012 7:12 pm
Posts: 2305
Post Re: The Time Has Come- custom build.
The good folks at Delta Performance have finished up the mods on my GTR XD. The motor is mounted and just went to the painter.

Getting closer to D-day

_________________
Uncle J 18x54

Gator Tail XD 37 EFI -Delta Performance Level 3


Thu Jun 29, 2017 6:23 pm
Profile
MMT 1000 Club
User avatar

Joined: Thu Jan 31, 2013 5:42 pm
Posts: 1913
Location: Conroe tx
Post Re: The Time Has Come- custom build.
Power !! If I can't wait to see this beast I know your on pins and needles, stand by to stand by .

H Finn

_________________
Ole black water keep on rolling

18x54 Uncle J -GTR - with the koolaid
Back H2o SWOMP 23 SS stage 2 15x36 GD Duck Skiff GATOR
GATOR GLIDE PROSTAFF
BACKWATER PROSTAFF
http://www.gatorglide.com

Coupe rest in peace brother


Thu Jun 29, 2017 7:14 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 81 posts ]  Go to page 1, 2, 3  Next

Who is online

Users browsing this forum: No registered users and 169 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: