| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| What hull to put my prodrive on?? http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=70521 |
Page 1 of 1 |
| Author: | Zacha123 [ Wed May 31, 2017 3:55 pm ] |
| Post subject: | What hull to put my prodrive on?? |
Just bought a prodrive 37efi. I hunt the marshes in Louisiana but make a couple trips to some timber throughout the season, and I also bass fish during the offseason. Trying to get some opinions on the best hull for the motor. I want something with some speed but still handles and fishes well. |
|
| Author: | Exbellicus [ Wed May 31, 2017 4:57 pm ] |
| Post subject: | Re: What hull to put my prodrive on?? |
You're likely going to see a lot of recommendations for matching it with a Prodrive boat. They are made for each other and will perform best there (unless you went custom). The transom angle and chine setup are important to match up. I have one on an 1848. It runs about 28 solo, 26 with two, 24 with 3, and 16 with 5 and a dog. I'm plenty comfortable standing an moving around on the front deck (I weight about 240), and there is room for 3 to fish comfortably. I've crappie fished on timber with 2 standing on the front deck (mine is the extended from PD) and it's tight, but doable. If I ordered a custom I'd probably bump up to a 52 or 54. |
|
| Author: | Full Throttle [ Wed May 31, 2017 5:18 pm ] |
| Post subject: | Re: What hull to put my prodrive on?? |
1854 is darn near the perfect sized all around hull for most people. I'd go with a pd hull to match the motor if you can find one. |
|
| Author: | Zacha123 [ Thu Jun 01, 2017 5:49 pm ] |
| Post subject: | Re: What hull to put my prodrive on?? |
Uncle j's boats? What y'all think about those? |
|
| Author: | BlueShamu [ Thu Jun 01, 2017 8:32 pm ] |
| Post subject: | Re: What hull to put my prodrive on?? |
Junk! Just kidding.... https://youtu.be/log2mxc5p70 https://youtu.be/Hm07xq2rkZk https://youtu.be/FGGybe5OhZM https://youtu.be/_xPetqwURNM |
|
| Author: | Full Throttle [ Fri Jun 02, 2017 6:02 am ] |
| Post subject: | Re: What hull to put my prodrive on?? |
Love my uncle J. They are performers for sure. My Willett custom that 3CK is now running was a performer as well. Lots of good options out there. I thought you were looking used, but if you are willing to wait, I'd go custom. Uncle J Willett |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|