MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
Grab bar question http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=74551 |
Page 1 of 1 |
Author: | Curly [ Tue Sep 17, 2019 3:00 pm ] |
Post subject: | Grab bar question |
I have a gt extreme series and am curious to know if you guys have to take your grab bar down when throwing a blind up. The bar seems taller than most and I didn’t want to make my poles so tall to clear the bar that they hung over the hull a lot. Thanks for any pics or input. |
Author: | Will [ Tue Sep 17, 2019 4:01 pm ] |
Post subject: | Re: Grab bar question |
I'm just curious but is it the typical square or round tube you insert? Cut it to whatever length you want. |
Author: | Curly [ Tue Sep 17, 2019 4:05 pm ] |
Post subject: | Re: Grab bar question |
Yea it is the round tubing. I had thought about that but didn’t know if anyone was having issues or had to make modifications to for the clearance. I’ll keep that in mind though I appreciate it will. |
Author: | bluesky2012 [ Tue Sep 17, 2019 5:10 pm ] |
Post subject: | Re: Grab bar question |
I either take it out before putting the blind up or just don’t take it when I hunt. Sent from my iPhone using Tapatalk Pro |
Author: | Curly [ Wed Sep 18, 2019 7:37 am ] |
Post subject: | Re: Grab bar question |
Blue i believe I seen a pic of your rig on an old post about blinds. It was your boat setup on the river. Think you said you were on a diver and goose hunt. Do you run an extreme series too with Rancho panels? If so is it a 18’, or 20’. Know the panels come in 18’ sections but I didn’t know if it will cover the bow and alittle of the motor too. |
Author: | Plandr5 [ Wed Sep 18, 2019 4:42 pm ] |
Post subject: | Re: Grab bar question |
I use the gtr blind on my extreme and the bar clears but you need to force it over a little. I just take it out. It’s one less thing to run into once in position if people are moving around. Sent from my iPhone using Tapatalk |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |