| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| Clear Coat on KEM 400 http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=4&t=75240 |
Page 1 of 1 |
| Author: | yup [ Wed Aug 12, 2020 7:54 am ] |
| Post subject: | Clear Coat on KEM 400 |
Searched and couldn’t find the information. Has anyone used Sher-Clear on KEM 400? Sent from my iPad using Tapatalk |
|
| Author: | GNSPEED [ Wed Aug 12, 2020 5:36 pm ] |
| Post subject: | Re: Clear Coat on KEM 400 |
PPG products lay fine over kem 400 so I dont think you will have a problem if its a quality product . |
|
| Author: | yup [ Wed Aug 12, 2020 6:02 pm ] |
| Post subject: | Re: Clear Coat on KEM 400 |
I was thinking about not doing a clear coat over it. I have read if you have to do a spot touch up or something after the clear coat is applied, the newer clear coat wouldn’t go on as well. Thinking about just letting it cure a week or two and calling it good. |
|
| Author: | idabilly [ Tue Feb 09, 2021 5:46 pm ] |
| Post subject: | Re: Clear Coat on KEM 400 |
You shouldn't have to clear coat over KEM-400. It's tough enough as it is. If you are clear coating to knock down the sheen then you didn't have the Sherwin store add flattening agent to get it down to a 3-5% sheen. That is what they do for the boat manufacturers. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|