Nah, not a bad experience, we don't wanna start that again.
Just ran into a dead end. I'm sure they are good to deal with, haven't seen anybody complain.
| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| OUT OF NOWHERES ITS RON HILL PROPELLERS http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=15031 |
Page 1 of 1 |
| Author: | bobbyjober [ Sat Jan 01, 2011 8:34 pm ] |
| Post subject: | OUT OF NOWHERES ITS RON HILL PROPELLERS |
http://motors.shop.ebay.com/prop19/m.html 9x7 surface piercing hex shaft-$199 http://boatracingfacts.com/forums/showt ... p?p=101074 the 12x13 ones-$299 Looks like competition for Hopkins and looks like the ones chops3131 are carrying. Sooooo buy direct save a buck. Hillmarine will make a prop to any size shaft you need, will charge you extra, but it can be done. |
|
| Author: | DeathMetalDukk [ Sat Jan 01, 2011 8:37 pm ] |
| Post subject: | Re: OUT OF NOWHERES ITS RON HILL PROPELLERS |
I had bad luck with ron hill, I needed a prop made for my old scavenger, but reversed. They were absolutely unwilling to try and make me one. |
|
| Author: | bobbyjober [ Sat Jan 01, 2011 8:41 pm ] |
| Post subject: | Re: OUT OF NOWHERES ITS RON HILL PROPELLERS |
Scavenger, thats why its a one of a kind. LOL I had good dealings with Ron Hill, but i never bought custom application, just what he sells. He is a reputable speed racing propeller man. I used and abused a 9x7 regualr mudmotor propeller and it digs and held up so far after 2 years. Sorry you had a bad experience. |
|
| Author: | DeathMetalDukk [ Sat Jan 01, 2011 8:42 pm ] |
| Post subject: | Re: OUT OF NOWHERES ITS RON HILL PROPELLERS |
Nah, not a bad experience, we don't wanna start that again. Just ran into a dead end. I'm sure they are good to deal with, haven't seen anybody complain. |
|
| Author: | HUNT4DEER [ Sun Jan 02, 2011 10:11 am ] |
| Post subject: | Re: OUT OF NOWHERES ITS RON HILL PROPELLERS |
scavenger, is a dead end to start with. i say that, i had one, it is what it is. |
|
| Author: | DeathMetalDukk [ Sun Jan 02, 2011 10:12 am ] |
| Post subject: | Re: OUT OF NOWHERES ITS RON HILL PROPELLERS |
| Author: | CAJUN OUTLAW [ Mon Jan 03, 2011 2:53 am ] |
| Post subject: | Re: OUT OF NOWHERES ITS RON HILL PROPELLERS |
at least it aint david forkin haselhoft
|
|
| Author: | specgoos1222 [ Sat Jan 08, 2011 12:32 pm ] |
| Post subject: | Re: OUT OF NOWHERES ITS RON HILL PROPELLERS |
I was told by a certain person at Hopkins that they wouldn't bother building me a prop for my Scavenger either. But then again they told me that nobody made an 9x3 prop when go-devil has them right there on their website. |
|
| Author: | chops3131 [ Sat Jan 08, 2011 12:51 pm ] |
| Post subject: | Re: OUT OF NOWHERES ITS RON HILL PROPELLERS |
| Author: | 50fps [ Sat Jan 08, 2011 5:12 pm ] |
| Post subject: | Re: OUT OF NOWHERES ITS RON HILL PROPELLERS |
Looks as if someone used a prop design with a keyway and then came up with a hex insert. |
|
| Author: | cb5331 [ Sat Jan 08, 2011 5:47 pm ] |
| Post subject: | Re: OUT OF NOWHERES ITS RON HILL PROPELLERS |
| Author: | chops3131 [ Sat Jan 08, 2011 9:19 pm ] |
| Post subject: | Re: OUT OF NOWHERES ITS RON HILL PROPELLERS |
| Author: | 50fps [ Sun Jan 09, 2011 10:03 am ] |
| Post subject: | Re: OUT OF NOWHERES ITS RON HILL PROPELLERS |
| Author: | chops3131 [ Sun Jan 09, 2011 10:17 am ] |
| Post subject: | Re: OUT OF NOWHERES ITS RON HILL PROPELLERS |
The ones you see in the pics are the test wheels the production ones will be casted with the hex in them |
|
| Author: | Robn1020 [ Sun Jan 09, 2011 7:23 pm ] |
| Post subject: | Re: OUT OF NOWHERES ITS RON HILL PROPELLERS |
So who do I order one for the GDSD? |
|
| Author: | chops3131 [ Sun Jan 09, 2011 7:35 pm ] |
| Post subject: | Re: OUT OF NOWHERES ITS RON HILL PROPELLERS |
| Author: | UNCLE-J [ Sun Jan 09, 2011 7:38 pm ] |
| Post subject: | Re: OUT OF NOWHERES ITS RON HILL PROPELLERS |
Can a little love be shined down on the PD owners? Thanks |
|
| Author: | POKER1 [ Sun Jan 09, 2011 7:40 pm ] |
| Post subject: | Re: OUT OF NOWHERES ITS RON HILL PROPELLERS |
Make an Insert and Ill test one on the PD for you. |
|
| Author: | Robn1020 [ Sun Jan 09, 2011 7:42 pm ] |
| Post subject: | Re: OUT OF NOWHERES ITS RON HILL PROPELLERS |
| Author: | DeathMetalDukk [ Sun Jan 09, 2011 7:43 pm ] |
| Post subject: | Re: OUT OF NOWHERES ITS RON HILL PROPELLERS |
| Author: | chops3131 [ Sun Jan 09, 2011 8:59 pm ] |
| Post subject: | Re: OUT OF NOWHERES ITS RON HILL PROPELLERS |
| Author: | pintail87 [ Mon Jan 10, 2011 10:53 pm ] |
| Post subject: | Re: OUT OF NOWHERES ITS RON HILL PROPELLERS |
just to let you guy's know, ron hill used to make props for mub buddy. including the tiger prop. |
|
| Author: | take'emgator [ Mon Jan 10, 2011 11:16 pm ] |
| Post subject: | Re: OUT OF NOWHERES ITS RON HILL PROPELLERS |
I hope you have your facts straight, cause these guys will eat you alive bro! |
|
| Author: | craig [ Tue Jan 11, 2011 7:53 am ] |
| Post subject: | Re: OUT OF NOWHERES ITS RON HILL PROPELLERS |
| Author: | 50fps [ Tue Jan 11, 2011 7:45 pm ] |
| Post subject: | Re: OUT OF NOWHERES ITS RON HILL PROPELLERS |
| Author: | pintail87 [ Thu Feb 10, 2011 8:43 pm ] |
| Post subject: | Re: OUT OF NOWHERES ITS RON HILL PROPELLERS |
| Author: | drake1 [ Fri Feb 11, 2011 8:26 am ] |
| Post subject: | Re: OUT OF NOWHERES ITS RON HILL PROPELLERS |
I have two 3 blade brass props that look just like those. They were original props for v drive ski boats. Bought em sent them to Hopkins and he had them broached to fit my GTR. Props had to have the blades worked and cupped. So see we tell the prop guys what we would like and they build the prop to try and meet our needs. Most good prop guys do the same type work. |
|
| Author: | craig [ Fri Feb 11, 2011 12:19 pm ] |
| Post subject: | Re: OUT OF NOWHERES ITS RON HILL PROPELLERS |
| Author: | deadbird8 [ Sun Feb 13, 2011 6:02 am ] |
| Post subject: | Re: OUT OF NOWHERES ITS RON HILL PROPELLERS |
| Author: | craig [ Sun Feb 13, 2011 7:54 am ] |
| Post subject: | Re: OUT OF NOWHERES ITS RON HILL PROPELLERS |
| Author: | XGEN-DUCKMAN [ Mon Feb 14, 2011 1:32 am ] |
| Post subject: | Re: OUT OF NOWHERES ITS RON HILL PROPELLERS |
The original Tiger prop was smaller and had more cup to it......Not as nice as the Big blade |
|
| Author: | chops3131 [ Tue Feb 15, 2011 7:32 pm ] |
| Post subject: | Re: OUT OF NOWHERES ITS RON HILL PROPELLERS |
| Author: | chops3131 [ Tue Feb 15, 2011 7:39 pm ] |
| Post subject: | Re: OUT OF NOWHERES ITS RON HILL PROPELLERS |
| Author: | WestEndAngler [ Tue Feb 15, 2011 7:46 pm ] |
| Post subject: | Re: OUT OF NOWHERES ITS RON HILL PROPELLERS |
Keith, I have a contact through my website, I'll call you to discuss |
|
| Author: | ibfishin [ Fri Feb 18, 2011 9:40 pm ] |
| Post subject: | Re: OUT OF NOWHERES ITS RON HILL PROPELLERS |
I've had prop work done by this company. I gave them my flatsboat prop, told them what I wanted it to do, they got my boat and motor info, then made it happen first attempt. http://bobbysolespropeller.com/ |
|
| Author: | pintail87 [ Sat Feb 19, 2011 12:25 am ] |
| Post subject: | Re: OUT OF NOWHERES ITS RON HILL PROPELLERS |
| Author: | pintail87 [ Sat Feb 19, 2011 12:27 am ] |
| Post subject: | Re: OUT OF NOWHERES ITS RON HILL PROPELLERS |
| Author: | fireman1293 [ Sat Mar 26, 2011 5:43 pm ] |
| Post subject: | Re: OUT OF NOWHERES ITS RON HILL PROPELLERS |
I personally wouldn't call a Scavenger prop a "prop". Its auger flighting, notice the cork screw design. Thats why they're motors are reversed because, its the only way to run auger flighting. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|