WTF would you put this on a 5 year old subject that is unrelated for?
| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| Welcome to the Props & Lower Unit Forum! http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=2478 |
Page 1 of 1 |
| Author: | Tony B [ Wed Jun 10, 2009 1:09 pm ] |
| Post subject: | Welcome to the Props & Lower Unit Forum! |
Since we have a lot of prop questions on the site, we've installed this wonderful new forum to talk about it all. Thanks MudSlinger for the idea! |
|
| Author: | HuntingRDR [ Wed Jun 10, 2009 4:52 pm ] |
| Post subject: | Re: Welcome to the Props & Lower Unit Forum! |
Thanks Tony B! |
|
| Author: | indybill [ Wed Jun 10, 2009 5:11 pm ] |
| Post subject: | Re: Welcome to the Props & Lower Unit Forum! |
Nice lower end on that rig. |
|
| Author: | Duckill01 [ Fri Jan 17, 2014 2:11 pm ] |
| Post subject: | Re: Welcome to the Props & Lower Unit Forum! |
New to forum. I have a 10 h.p. Briggs with a home made lower with: 5" upper pulley ,3.5" lower pulley, and 9x6 mud prop. My problem is that it bogs down when I lower low into water, but hauls ass and then dies. I am thinking besides not lowering so far into water, that my pulleys or my prop pitch is off. I wanted to ask some experienced guys about this. Any???? |
|
| Author: | CAJUN OUTLAW [ Fri Jan 17, 2014 2:18 pm ] |
| Post subject: | Re: Welcome to the Props & Lower Unit Forum! |
Try the small pulley on top and big on bottom just to see if it still Boggs down....should have plenty power then, prolly could run it on dry land. |
|
| Author: | Duckill01 [ Fri Jan 17, 2014 2:27 pm ] |
| Post subject: | Re: Welcome to the Props & Lower Unit Forum! |
Wouldn't that be less torque? surely that would bog down worse? I can run on very low water now, just cant seem to keep it running well the further the pitch of the motor gets into the water. |
|
| Author: | Gtr18x42 [ Wed Jan 22, 2014 9:05 pm ] |
| Post subject: | Re: Welcome to the Props & Lower Unit Forum! |
to much prop for starts and the pulleys need to be swapped then try the prop but u may have to drop in the 8" range |
|
| Author: | OlSchool [ Wed Jan 22, 2014 9:15 pm ] |
| Post subject: | Re: Welcome to the Props & Lower Unit Forum! |
Big pulley on bottom increases the torque. |
|
| Author: | Gtr18x42 [ Wed Jan 22, 2014 9:25 pm ] |
| Post subject: | Re: Welcome to the Props & Lower Unit Forum! |
should thats how all the mm are setup |
|
| Author: | Woodiebuster [ Sat Jan 25, 2014 6:56 pm ] |
| Post subject: | Re: Welcome to the Props & Lower Unit Forum! |
WTF would you put this on a 5 year old subject that is unrelated for?
|
|
| Author: | fullrutt [ Sat Jan 25, 2014 8:52 pm ] |
| Post subject: | Re: Welcome to the Props & Lower Unit Forum! |
So what is the best prop for a MB 55 and a PD 36.. It's time to get two news and I want to buy the best performance prop for each motor Sent from my iPhone using Tapatalk |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|