| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| good speeds but does it need repitching? http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=28167 |
Page 1 of 1 |
| Author: | JGUT [ Tue Apr 03, 2012 9:07 pm ] |
| Post subject: | good speeds but does it need repitching? |
I recently put a new gd 9x6 on my gd23lt on a 1750 very similar to a gd hull its running 19 to 20 just me and the dog but only turning 3200 rpms add another 250 lbs it drops to 18mph and 3100 rpms. Should I repitch it to 9x5 or leave it be. Just seems like really low rpms. Thanks. |
|
| Author: | dguidry [ Wed Apr 04, 2012 8:56 am ] |
| Post subject: | Re: good speeds but does it need repitching? |
Got a question on prop pitch. My GTR23 with heads decked, Hoyt performance cam, and Mikuni carb is turning about 4050 RPMs @ 29 - 30 mph maxed out. Prop is only slightly worn; am not too abusive on my rig. I'm thinking optimum RPM for this set up should be a bit higher? Any suggestions relative to prop improvement? |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|