MudmotorTalk.com
http://www.mudmotortalk.com/mmt_v2/

Mudd Buddy Electric Tilt
http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=28836		 Page 1 of 1
Author:  Scoot72 [ Sat Apr 28, 2012 8:56 pm ]
Post subject:  Mudd Buddy Electric Tilt
I have a 2005 HD35 Mudd Buddy motor and the tilt has been giving me problems. I tore it apart and everything looks normal. Needed some grease. I cleaned it up and regreased it. Hooked it up to the motor just to check it. Hit the switch and the shaft rotated. I bolted it back up and nothing but a bunch of clicking. Took it back off and checked it to see if it still was working. I took two welding rods and put them in the bolt hole and hit the switch. It twisted them up. Put 3 rods in and wouldn't bend them. I know its a screw drive but can't figure out how to get the drive itself out. Does anyone have any ideas?
Author:  deltaduckmaster [ Sat Apr 28, 2012 9:02 pm ]
Post subject:  Mudd Buddy Electric Tilt
Put insurance on it and blow it up!! Bawha
Author:  Scoot72 [ Sat Apr 28, 2012 9:15 pm ]
Post subject:  Re: Mudd Buddy Electric Tilt
Sorry don't find the humor on that reply. I asked for help not for a smarta** comment.
Author:  cb5331 [ Sat Apr 28, 2012 9:18 pm ]
Post subject:  Re: Mudd Buddy Electric Tilt
Welcome to MMT. :lol: I'm sure you'll get some help eventually, just have to wait on one of the mudbuddy guys to log in. You may also try the search feature, if you haven't already. They've had several different trims on their motors and I'm pretty sure I've seen tear down instructions on more than one of them.
Author:  med [ Sat Apr 28, 2012 9:29 pm ]
Post subject:  Re: Mudd Buddy Electric Tilt
You check over on the mb Site?
Author:  deltaduckmaster [ Sat Apr 28, 2012 9:29 pm ]
Post subject:  Mudd Buddy Electric Tilt
Bawhaha
Author:  sela_native [ Sat Apr 28, 2012 9:35 pm ]
Post subject:  Re: Mudd Buddy Electric Tilt
ddm you sure are on a roll hahaha
Author:  deltaduckmaster [ Sat Apr 28, 2012 9:37 pm ]
Post subject:  Mudd Buddy Electric Tilt


On number 14 right now weight till I get to 30 or so !! Lol
Author:  deltaduckmaster [ Sat Apr 28, 2012 9:39 pm ]
Post subject:  Mudd Buddy Electric Tilt
I will take over the post count tonight at everybody's expense!! Jason hour toast dic!!
Author:  dwight37 [ Mon Apr 30, 2012 12:45 pm ]
Post subject:  Re: Mudd Buddy Electric Tilt
I just had mine all apart and put it back together ill try to help ya out if I can.
First of all is the bolt that holds the bottom of the trim unit loose so it can slide up and down in the track?
Is it a bear or Thomson trim unit?
Pm me if this isn't the problem!
Author:  Scoot72 [ Mon Apr 30, 2012 1:07 pm ]
Post subject:  Re: Mudd Buddy Electric Tilt
Yes that was my first thought that it had bound up but not the case. It is a bear. Finally got it apart and there was a washer in pieces that fell out. Trying to find one now.
Author:  fowl habbit [ Mon Apr 30, 2012 1:19 pm ]
Post subject:  Re: Mudd Buddy Electric Tilt
If its the old bear unit I would just replace the whole thing with the Thomson trim untit, Its still not nearly as good as the mercury trim unit but will last longet than the bear will, If I remeber right you can get the whole thing for a littel over $100 bucks
Author:  Smoke [ Mon Apr 30, 2012 5:43 pm ]
Post subject:  Re: Mudd Buddy Electric Tilt
If you would check ur same thread on mb forum I answered all your questions and told ya i'd help ya out. You'll get no simpathy over here on a mud buddy motor. So slow ur roll their just bustin on ya a bit. Nothing personal and if it is fork em!

Smoke
Author:  Quackkillz [ Mon Apr 30, 2012 11:28 pm ]
Post subject:  Mudd Buddy Electric Tilt
I just changed mine Saturday, it is a Thompson trim, I ordered it for $260 and it comes with all the hardware if your upgrading from a bear to a Thompson.
Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/