1000 for a 32 they can keep em! hell the shaft aint but 114 bucks, is the tube and seals worth 886 bucks
| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| Gtr 32" shaft http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=34565 |
Page 1 of 1 |
| Author: | RoyBoy10 [ Thu Nov 22, 2012 6:24 pm ] |
| Post subject: | Gtr 32" shaft |
Anyone know off hand how much the 32" shaft cost? Plan on ordering one Monday and was wondering the round about price. Thanks |
|
| Author: | DuckHunterF250 [ Thu Nov 22, 2012 6:25 pm ] |
| Post subject: | Re: Gtr 32" shaft |
600 last time i checked |
|
| Author: | RoyBoy10 [ Thu Nov 22, 2012 6:36 pm ] |
| Post subject: | Re: Gtr 32" shaft |
| Author: | Team Camo [ Thu Nov 22, 2012 8:33 pm ] |
| Post subject: | Re: Gtr 32" shaft |
With new motor, 350. After that they went up to 1000. Used to be 600 plus trade in. |
|
| Author: | Team Camo [ Thu Nov 22, 2012 8:34 pm ] |
| Post subject: | Re: Gtr 32" shaft |
BTW, I'm going Monday morning to pick up a motor if you need me to pick it up. |
|
| Author: | RoyBoy10 [ Thu Nov 22, 2012 8:39 pm ] |
| Post subject: | Re: Gtr 32 |
| Author: | Team Camo [ Thu Nov 22, 2012 9:50 pm ] |
| Post subject: | Re: Gtr 32" shaft |
That's what Bubba told me 3 weeks ago. Call Monday at 8:00 and find out. If they've got one ready & you want it, I'll pick it up while I'm there. |
|
| Author: | DuckHunterF250 [ Thu Nov 22, 2012 10:31 pm ] |
| Post subject: | Re: Gtr 32" shaft |
1000 for a 32 they can keep em! hell the shaft aint but 114 bucks, is the tube and seals worth 886 bucks
|
|
| Author: | dfou [ Thu Nov 22, 2012 10:34 pm ] |
| Post subject: | Re: Gtr 32" shaft |
1k is crazy! I thought 600$ for my 32" MB shaft was too much |
|
| Author: | take'emgator [ Thu Nov 22, 2012 11:42 pm ] |
| Post subject: | Re: Gtr 32" shaft |
THey make them as they are ordered most that are made are for customer rigs. Its cheaper to order them with new motors, but if you not getting a new motor then i guess its 1K |
|
| Author: | renovator [ Tue Nov 27, 2012 9:08 pm ] |
| Post subject: | Re: Gtr 32" shaft |
And this is the reason I went pro drive. Rip off |
|
| Author: | dozrya [ Tue Nov 27, 2012 9:13 pm ] |
| Post subject: | Re: Gtr 32" shaft |
| Author: | CCC [ Tue Nov 27, 2012 9:14 pm ] |
| Post subject: | Re: Gtr 32" shaft |
| Author: | renovator [ Tue Nov 27, 2012 9:21 pm ] |
| Post subject: | Re: Gtr 32" shaft |
When gt refused to sell me a frame for the mod motor that I had and told me that I would have to buy a new motor or have a bill of sale to get gt parts I was done. They can suck it. |
|
| Author: | take'emgator [ Tue Nov 27, 2012 9:32 pm ] |
| Post subject: | Re: Gtr 32" shaft |
Good be happy with your Pro-drive, Gator Tails aren't for everybody. So you bought a frame from PD and put your Mod motor on it? |
|
| Author: | craig [ Tue Nov 27, 2012 9:43 pm ] |
| Post subject: | Re: Gtr 32" shaft |
| Author: | dfou [ Tue Nov 27, 2012 10:15 pm ] |
| Post subject: | Re: Gtr 32" shaft |
| Author: | med [ Tue Nov 27, 2012 11:11 pm ] |
| Post subject: | Re: Gtr 32" shaft |
Sounds like they're being call they can be anyway. They probably don't care about selling a frame here and there. |
|
| Author: | Team Camo [ Tue Nov 27, 2012 11:12 pm ] |
| Post subject: | Re: Gtr 32" shaft |
While I agree there's big market for it, I also think you'd be better off buying the stock GTR, swapping either the parts or whole powerhead yourself, then selling your old frame with a powerhead on it. |
|
| Author: | CCC [ Wed Nov 28, 2012 7:35 am ] |
| Post subject: | Re: Gtr 32" shaft |
Either way he bought a new motor, unless he has that horizontal motor mounted on its side on the pd. |
|
| Author: | renovator [ Wed Nov 28, 2012 9:37 pm ] |
| Post subject: | Re: Gtr 32" shaft |
Sold the 5500 and got pd. See a ton of prodrives in Venice that look like they have been well abused and still kicking strong. they seem to handle the sand bottom better imo |
|
| Author: | renovator [ Wed Nov 28, 2012 9:39 pm ] |
| Post subject: | Re: Gtr 32" shaft |
Oh Yeah, The 36 has the pistons/rods cam, lifters,and heads installed just need time to install the carb and ex |
|
| Author: | huntingsmith [ Wed Nov 28, 2012 10:55 pm ] |
| Post subject: | Re: Gtr 32" shaft |
Nothin runs sand. |
|
| Author: | take'emgator [ Wed Nov 28, 2012 11:49 pm ] |
| Post subject: | Re: Gtr 32" shaft |
Emphasize......NOTHING Runs sand, sand is the devil to these motors, and out of all of them i'm willing to bet prodrive is the worst in a sandy bottom |
|
| Author: | CAJUN OUTLAW [ Thu Nov 29, 2012 12:42 am ] |
| Post subject: | Re: Gtr 32" shaft |
A FUKKIN FIDDLER CRAB WILL RUN SAND ALL FUKKIN DAY LONG!!!!! AND RUN FAST FAST TOO! 
|
|
| Author: | take'emgator [ Thu Nov 29, 2012 1:03 am ] |
| Post subject: | Re: Gtr 32" shaft |
Damn it you got me Cajun....lmao |
|
| Author: | deltaduckmaster [ Thu Nov 29, 2012 6:28 am ] |
| Post subject: | Re: Gtr 32" shaft |
| Author: | renovator [ Thu Nov 29, 2012 6:34 am ] |
| Post subject: | Re: Gtr 32" shaft |
I pretty much buy a motor every year, mod it out ,run it then sell it. I can't say that I won't have a gt next year but I'm glad I got rid of the mb. 
|
|
| Author: | CCC [ Thu Nov 29, 2012 7:16 am ] |
| Post subject: | Re: Gtr 32" shaft |
| Author: | MaxP [ Wed Dec 05, 2012 6:17 pm ] |
| Post subject: | Re: Gtr 32" shaft |
^^^ hey renovater you went with a poo-drive to have a 12" shaft??! |
|
| Author: | huntingsmith [ Thu Dec 06, 2012 7:55 am ] |
| Post subject: | Re: Gtr 32" shaft |
| Author: | JIMMY W [ Thu Dec 06, 2012 5:34 pm ] |
| Post subject: | Re: Gtr 32" shaft |
| Author: | JIMMY W [ Thu Dec 06, 2012 5:35 pm ] |
| Post subject: | Re: Gtr 32" shaft |
| Author: | pooldoo73 [ Thu Dec 06, 2012 7:11 pm ] |
| Post subject: | Re: Gtr 32" shaft |
But best n the lillies. |
|
| Author: | renovator [ Sun Dec 09, 2012 8:36 pm ] |
| Post subject: | Re: Gtr 32" shaft |
Put 6 hours on the stage 3 pro-drive and its a beast. put 160 hours on one in southwest pass last year with no problems. If it won't go forward go backwards. I did see a gt stuck as I passed it this weekend
|
|
| Author: | renovator [ Sun Dec 09, 2012 8:38 pm ] |
| Post subject: | Re: Gtr 32" shaft |
No problems in mud and it's lighter than my mudbuddy was. |
|
| Author: | CCC [ Sun Dec 09, 2012 8:44 pm ] |
| Post subject: | Re: Gtr 32" shaft |
Pro drives lighter than a mud buddy? |
|
| Author: | renovator [ Mon Dec 10, 2012 5:38 am ] |
| Post subject: | Re: Gtr 32" shaft |
The only change I made to the boat was an engine swap and the boat floats a little over an inch higher. It runs the same speed which is around 31-32 with a light load deep water. And now when I'm scouting and I run to the end of a small canal I just back out. |
|
| Author: | deltaduckmaster [ Mon Dec 10, 2012 6:33 am ] |
| Post subject: | Re: Gtr 32" shaft |
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|