| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| 3 blade on a 27 http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=3610 |
Page 1 of 1 |
| Author: | willtodo [ Sat Aug 01, 2009 5:25 pm ] |
| Post subject: | 3 blade on a 27 |
Has any body got before & after perfomance on the 3 blade. |
|
| Author: | Gigafowl [ Sat Aug 01, 2009 6:34 pm ] |
| Post subject: | Re: 3 blade on a 27 |
Willtodo, Can tell you about the 27 GDSD and the change from GD 2 blade 12x12 to the GD 3 blade 11x12 (actually 11.5 pitch).... The 2 blade is a few mph faster at WOT - but the 3 has lots more acceleration from the holeshot and more pull in the sloppy mud... On my Weldbilt 17x42 (very light hull)- 30mph and 28mph w/3 blade deep water... From 20mph to WOT - they are very similar - both work well in veggies especially if running in a "surfacing profile" where shaft is above the waterline... If you sink it the 3 will accumulate more parasitic veggie wrap, requiring an above water "spin off" then resubmerge.... Hope that will help - not sure how that translates to your MM brand - but there should be some similarities... |
|
| Author: | willtodo [ Sat Aug 01, 2009 8:26 pm ] |
| Post subject: | Re: 3 blade on a 27 |
thank you, very helpfull |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|