MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
Prop Replacement http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=62211 |
Page 1 of 1 |
Author: | Rick.B [ Thu Jun 11, 2015 6:32 pm ] |
Post subject: | Prop Replacement |
New to the mud motor world and I am wondering how much wear you guys allow on props until you change them? I have a go devil 9x7 prop, I know go devil says at 8 inches but what does everyone else think? |
Author: | msm8281 [ Thu Jun 11, 2015 7:05 pm ] |
Post subject: | Re: Prop Replacement |
When it don't preform like you want it. |
Author: | Rick.B [ Thu Jun 11, 2015 7:17 pm ] |
Post subject: | Re: Prop Replacement |
Author: | msm8281 [ Thu Jun 11, 2015 7:19 pm ] |
Post subject: | Re: Prop Replacement |
I don't know. Buy a new one and use the old one as a spare. |
Author: | kibb [ Thu Jun 11, 2015 8:34 pm ] |
Post subject: | Re: Prop Replacement |
I'd ask others about a 23 prop before I went with a 9x7. It might suck with that engine and a load. |
Author: | Rick.B [ Thu Jun 11, 2015 8:39 pm ] |
Post subject: | Re: Prop Replacement |
Author: | msm8281 [ Thu Jun 11, 2015 8:40 pm ] |
Post subject: | Re: Prop Replacement |
What does the GD website say? |
Author: | kibb [ Thu Jun 11, 2015 8:51 pm ] |
Post subject: | Re: Prop Replacement |
I'd run the 9x6. Coco been doing this for decades and I'm sure he knows what to recommend on his motors. |
Author: | Rick.B [ Sat Jun 13, 2015 6:10 pm ] |
Post subject: | Re: Prop Replacement |
Has/is anyone running another brand of prop on their Go-Devil other than Go-Devil? If so, how is the performance? Especially backwaters |
Author: | Buzz Killington [ Fri Jul 03, 2015 4:36 am ] |
Post subject: | Re: Prop Replacement |
I prefer Backwater LT props over all others. B. MacDonald |
Author: | Bigbuckfever [ Sat Jul 04, 2015 5:06 am ] |
Post subject: | Re: Prop Replacement |
Backwater props have definitely impressed me. Usually lose 1-2 mph light loaded, but will push more weight more easily and quite good hole shot. Sent from my iPhone using Tapatalk |
Author: | Rick.B [ Sat Jul 04, 2015 5:57 am ] |
Post subject: | Re: Prop Replacement |
Author: | steinb3rg [ Sat Jul 04, 2015 7:52 am ] |
Post subject: | Re: Prop Replacement |
They are less expensive than godevil but in my experience are thinner. Have seen two break blades and one crack when hitting submersed objects. My buddy has the 27 LS and went with the 35 prop this last time due to it being thicker. Still runs about 20 on his 17' boat. |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |