| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| 8x4 or 9x3 http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=62492 |
Page 1 of 1 |
| Author: | bojac [ Thu Jul 02, 2015 4:31 pm ] |
| Post subject: | 8x4 or 9x3 |
I'm currently running an 8x4 prop behind a 16hp I believe Go devil 16s run a 9x3. Would I get more rpm with a load using a 9x3? |
|
| Author: | CypressCritter [ Sun Jul 12, 2015 1:26 pm ] |
| Post subject: | Re: 8x4 or 9x3 |
I had a 16hp GD and ran a 9x3 2blade for mud and heavier load at 38-3900rpm@aprox 12 mph and 9x3 3 blade for open water at 3600rpm @ approx. 15 mph. the 2 blade was better for veggie and would crawl in the tough shit and the 3 blade worked ok but not a good in the mud and veggies! I would replace props when they wore down below 8" because loss of speed and digging power! all on a 16x48 Lowe flatbottom, |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|