| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| GT two blade http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=63234 |
Page 1 of 1 |
| Author: | LB200 [ Fri Aug 14, 2015 7:08 pm ] |
| Post subject: | GT two blade |
I am running a GT 11 pitch 3 blade but was hoping for a little more top end. What is everyone's experience with the two blade? I carry a lot of heavy loads as a rule so it has to be able to push a load not just a light boat |
|
| Author: | Waterturkey [ Sat Aug 15, 2015 5:13 am ] |
| Post subject: | Re: GT two blade |
I have a big heavy 1852 and had a 3blade 10p a d it didn't carry a load very well. I swapped to the gt 10p 2blade and it was 1.5mph faster with a light load and quiet a bit faster with 4 adults in it. It went through mud and vegetation better and reversed better. Only negative is it vibrates quiet a bit more. I have a 2015 carb motor stock besides k&n air and slight tinkering with carb. But if you do a search, some like the 3blade better. I would like to try a mb bb on it. |
|
| Author: | LB200 [ Sun Aug 16, 2015 5:47 am ] |
| Post subject: | Re: GT two blade |
The BB on mine was a little faster light but slower with a heavy load. Of course, we are talking a couple miles per hour in any direction so at times it seems fruitless lol |
|
| Author: | HOTSAUCE170 [ Sun Aug 16, 2015 10:02 am ] |
| Post subject: | Re: GT two blade |
| Author: | Waterturkey [ Sun Aug 16, 2015 1:18 pm ] |
| Post subject: | Re: GT two blade |
Like someone said on another post, there is no 1 magic prop made "yet" that is the best for all applications. Power Tech is currently making a 4blade 9in prop for the guys who hunt the restricted marsh areas. 2 of the blades have a 9in diameter and the other 2 have only a 5in diameter, giving it the same surface area as a 12in 2blade prop making it superior to any prop previously made.They have the balancing problem almost solved and it may even be out this year... Cough, cough, bullshit, cough. Lol |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|