| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| Mud buddy hd - need advice http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=65219 |
Page 1 of 1 |
| Author: | rsklhm10 [ Sat Jan 02, 2016 6:31 pm ] |
| Post subject: | Mud buddy hd - need advice |
Was cleaning my motor today and notice an opening on the out drive (beside the dipstick). I've never noticed if and am concerned a plug has fallen out? Any advice. 06 mud buddy hd 23hp |
|
| Author: | Russ [ Sat Jan 02, 2016 7:51 pm ] |
| Post subject: | Re: Mud buddy hd - need advice |
It's usually a 90 degree fitting, pointing downwards, to vent the heat. There should be a hose on the other side running up to the engine housing for the fan to shove air into the belt housing. Cools the belt and clutch a little with the air exchange |
|
| Author: | rsklhm10 [ Sat Jan 02, 2016 8:07 pm ] |
| Post subject: | Re: Mud buddy hd - need advice |
| Author: | Russ [ Sat Jan 02, 2016 8:13 pm ] |
| Post subject: | Re: Mud buddy hd - need advice |
Yes |
|
| Author: | Andy [ Sat Jan 02, 2016 8:22 pm ] |
| Post subject: | Re: Mud buddy hd - need advice |
| Author: | rsklhm10 [ Sat Jan 02, 2016 9:04 pm ] |
| Post subject: | Re: Mud buddy hd - need advice |
Thank your sirs. |
|
| Author: | DmaxHunter [ Sun Jan 03, 2016 5:00 am ] |
| Post subject: | Re: Mud buddy hd - need advice |
I have an extra lying around here somewhere, if you need it. |
|
| Author: | rsklhm10 [ Sun Jan 03, 2016 9:19 am ] |
| Post subject: | Re: Mud buddy hd - need advice |
| Author: | Russ [ Sun Jan 03, 2016 12:15 pm ] |
| Post subject: | Re: Mud buddy hd - need advice |
It's not special. Just need something so water doesn't get in there, and air can still flow out freely. |
|
| Author: | DmaxHunter [ Sun Jan 03, 2016 5:37 pm ] |
| Post subject: | Re: Mud buddy hd - need advice |
Russ is correct it's a pvc plumbing 90 believe it would be either 3/4 or 1 inch. The name should be on the fitting, believe spear. |
|
| Author: | deadbird8 [ Wed Jan 20, 2016 5:33 am ] |
| Post subject: | Re: Mud buddy hd - need advice |
| Author: | DmaxHunter [ Thu Jan 21, 2016 12:10 am ] |
| Post subject: | Re: Mud buddy hd - need advice |
Db, you are right I looked at it after I posted that. I just remember spear making plumbing connectors, they obviously make electrical aswell. Thanks for clearing that up |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|