| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| big blade on 37gtr http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=66559 |
Page 1 of 1 |
| Author: | drakers11 [ Tue Apr 12, 2016 9:17 pm ] |
| Post subject: | big blade on 37gtr |
Will a worked/cupped big blade put me on or over the rev limiter on a 37gtr ? Boat is a 1856. 100 |
|
| Author: | TPerkins [ Wed Apr 13, 2016 9:47 am ] |
| Post subject: | Re: big blade on 37gtr |
I answered you in the other thread.. "Stock it ran up to 4600 on my rig but sucked out the hole.. I added a some cup after it had some light wear. And it was perfect for a stock motor. It ran a solid 29-30 light and pushed a load well." Sent from my SM-G920V using Tapatalk |
|
| Author: | TPerkins [ Wed Apr 13, 2016 9:49 am ] |
| Post subject: | Re: big blade on 37gtr |
But to clearly answer it. No you shouldn't hit it with a stock bb(may be close)and definitely not with a cupped one. Bb seems to be the more popular 2 blade on the 37s. Sent from my SM-G920V using Tapatalk |
|
| Author: | 3rd Coast Killer [ Wed Apr 13, 2016 12:47 pm ] |
| Post subject: | Re: big blade on 37gtr |
| Author: | tchauvin [ Thu Apr 14, 2016 8:43 am ] |
| Post subject: | Re: big blade on 37gtr |
A big blade with 1'' of pitch still turns 4350-4400 on an 18/54 prodigy... The "blowout" on takeoff is much improved also. |
|
| Author: | MaXXis85 [ Thu Apr 14, 2016 9:10 am ] |
| Post subject: | Re: big blade on 37gtr |
| Author: | TPerkins [ Thu Apr 14, 2016 11:10 am ] |
| Post subject: | Re: big blade on 37gtr |
Is that a stock motor on the prodigy tchauvin Sent from my SM-G920V using Tapatalk |
|
| Author: | tchauvin [ Thu Apr 14, 2016 12:13 pm ] |
| Post subject: | Re: big blade on 37gtr |
| Author: | tchauvin [ Thu Apr 14, 2016 1:16 pm ] |
| Post subject: | Re: big blade on 37gtr |
| Author: | tchauvin [ Thu Apr 14, 2016 1:16 pm ] |
| Post subject: | Re: big blade on 37gtr |
| Author: | drakers11 [ Sat Apr 16, 2016 11:32 am ] |
| Post subject: | Re: big blade on 37gtr |
First mud motor so not really sure what kind of prop work is best. Thanks for the guys helping out. So verdict is 1" of pitch runs better than stock. Should I tell my prop guy to put any cup to it also ? Pitch plus cup ? Whats ideal for holeshot, speed and mud ? |
|
| Author: | TPerkins [ Sat Apr 16, 2016 1:10 pm ] |
| Post subject: | Re: big blade on 37gtr |
I did light cup. Gained speed on top, and drastically improved holeshot. Sent from my SM-G920V using Tapatalk |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|