We need to get together one day and have a prop tuning day, like we said we was at Seminole
| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| GTR prop confusion http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=67821 |
Page 1 of 2 |
| Author: | flint87 [ Wed Aug 10, 2016 7:42 pm ] |
| Post subject: | GTR prop confusion |
Let me first start by saying this boat is belonging to a friend of a friend and I haven't seen or ran it. Can only go by what I've been told. He says he's getting 27 mph out of this prop that looks trashed to me....or some kind of weird looking custom job if it ain't. Motor has a Mikuni and a MM exhaust. Could possibly have head work. He doesn't know. He bought it a few days ago from a dealer in gulf shores Alabama. The videos I have seen of it running it doesn't sound like it's got a cam in it. I do not know what rpm he is turning at 27mph. Does this prop look trashed to y'all? What's a a good replacement? Haven't I been reading gator tail isn't making their two blade any more and people are unhappy with their new three blade? Does a MB big blade fit the GTR directly? Bc I will be going past prodigy tomorrow and could possibly pick one up from them. Sent from my iPhone using Tapatalk |
|
| Author: | JD145 [ Wed Aug 10, 2016 7:53 pm ] |
| Post subject: | Re: GTR prop confusion |
That prop is pretty burnt. The big blade will work no problem. There will be a small amount of play on the shaft but it goes away when tightened |
|
| Author: | MaXXis85 [ Thu Aug 11, 2016 6:19 am ] |
| Post subject: | Re: GTR prop confusion |
That's a worn out Powertech. It's gone. Get a big blade, sharpen the edges, polish it, and run the crap out of it. |
|
| Author: | HOTSAUCE170 [ Thu Aug 11, 2016 8:24 am ] |
| Post subject: | Re: GTR prop confusion |
x2 on both posts above and if hes got mods he may wanna consider the hammer too |
|
| Author: | MaXXis85 [ Thu Aug 11, 2016 9:01 am ] |
| Post subject: | Re: GTR prop confusion |
| Author: | HOTSAUCE170 [ Thu Aug 11, 2016 9:21 am ] |
| Post subject: | Re: GTR prop confusion |
| Author: | JD145 [ Thu Aug 11, 2016 9:24 am ] |
| Post subject: | Re: GTR prop confusion |
I would like to send a hammer to a prop shop and see what could be improved. It's an excellent prop for hunting season, especially when dealing with sand |
|
| Author: | MaXXis85 [ Thu Aug 11, 2016 9:33 am ] |
| Post subject: | Re: GTR prop confusion |
GT has a version that less pitch. |
|
| Author: | JD145 [ Thu Aug 11, 2016 9:36 am ] |
| Post subject: | Re: GTR prop confusion |
| Author: | MaXXis85 [ Thu Aug 11, 2016 9:45 am ] |
| Post subject: | Re: GTR prop confusion |
| Author: | flint87 [ Thu Aug 11, 2016 10:01 am ] |
| Post subject: | Re: GTR prop confusion |
So big blade is best all around even for a GTR is what I'm gathering? Y'all know my ass runs a gdsd. Got the one option for prop besides Hopkins tulip which I haven't heard a whole lot of good sbout Sent from my iPhone using Tapatalk |
|
| Author: | SCmudder7071 [ Thu Aug 11, 2016 10:03 am ] |
| Post subject: | Re: GTR prop confusion |
| Author: | MaXXis85 [ Thu Aug 11, 2016 10:07 am ] |
| Post subject: | Re: GTR prop confusion |
If you want the big blade to run GOOD like the old Powertechs, you need to make it look like a powertech. |
|
| Author: | mizzippi jb [ Thu Aug 11, 2016 10:52 am ] |
| Post subject: | Re: GTR prop confusion |
| Author: | JD145 [ Thu Aug 11, 2016 11:10 am ] |
| Post subject: | Re: GTR prop confusion |
| Author: | mudxxed [ Thu Aug 11, 2016 7:06 pm ] |
| Post subject: | Re: GTR prop confusion |
We need to get together one day and have a prop tuning day, like we said we was at Seminole
|
|
| Author: | mudxxed [ Thu Aug 11, 2016 7:07 pm ] |
| Post subject: | Re: GTR prop confusion |
Oh yeah and Flint, that props Toast 
|
|
| Author: | HOTSAUCE170 [ Thu Aug 11, 2016 8:57 pm ] |
| Post subject: | Re: GTR prop confusion |
If you scared say u scared lol Sent from denda this |
|
| Author: | pnut [ Sun Aug 14, 2016 8:59 am ] |
| Post subject: | Re: GTR prop confusion |
| Author: | MaXXis85 [ Mon Aug 15, 2016 9:48 am ] |
| Post subject: | Re: GTR prop confusion |
| Author: | pnut [ Mon Aug 15, 2016 10:50 am ] |
| Post subject: | Re: GTR prop confusion |
| Author: | MaXXis85 [ Mon Aug 15, 2016 12:18 pm ] |
| Post subject: | Re: GTR prop confusion |
| Author: | pnut [ Mon Aug 15, 2016 12:20 pm ] |
| Post subject: | Re: GTR prop confusion |
It's a stage 3 |
|
| Author: | MaXXis85 [ Mon Aug 15, 2016 12:25 pm ] |
| Post subject: | Re: GTR prop confusion |
Add 1" of pitch and give it a try every setup is different. Too much prop is worse than not enough prop. |
|
| Author: | pnut [ Mon Aug 15, 2016 1:33 pm ] |
| Post subject: | Re: GTR prop confusion |
10 4 preciate it. |
|
| Author: | zschne1 [ Tue Aug 16, 2016 12:41 pm ] |
| Post subject: | Re: GTR prop confusion |
Rather than start my own thread I figured I'd piggy back on this one since people are responding. I have a 37 GTR on order and it will have Calen's stage 3 kit when I pick it up. I am running it on a 17x44 Gator Trax boat that formerly had a 35 MB on it. Where should I start prop wise? Stock GTR 3 blade? Big Blade with more pitch? I'm not going to spend $1000 playing with mud motor props to get 2 more mph. I need a prop that I can throw on and beat up...but still get solid performance out of. |
|
| Author: | TPerkins [ Tue Aug 16, 2016 12:47 pm ] |
| Post subject: | Re: GTR prop confusion |
Hammer Sent from my SM-G920V using Tapatalk |
|
| Author: | zschne1 [ Tue Aug 16, 2016 1:35 pm ] |
| Post subject: | Re: GTR prop confusion |
| Author: | JD145 [ Tue Aug 16, 2016 4:22 pm ] |
| Post subject: | Re: GTR prop confusion |
| Author: | ibfishinb [ Wed Aug 17, 2016 10:18 am ] |
| Post subject: | Re: GTR prop confusion |
What JD said.... just ask Calen. A worked 3 blade performs great on my Delta modded carb motor. Sent from my SM-G920V using Tapatalk |
|
| Author: | TPerkins [ Wed Aug 17, 2016 1:16 pm ] |
| Post subject: | Re: GTR prop confusion |
Worked BB was the fastest I've ran @34.7 hammer is a good load prop and an absolute beast, it wears well. I run 31 empty and 28 with 4 people plus bowfishing gear. I have ran an 11p and 10.5p 3 blade, neither have impressed me. They run a bit faster but not enough to justify it over a 2blade Sent from my SM-G920V using Tapatalk |
|
| Author: | ibfishinb [ Wed Aug 17, 2016 5:38 pm ] |
| Post subject: | Re: GTR prop confusion |
I need to give my worked 2 blade another chance. I just like not having any Tiller torque and hitting 32.9 with me, a cooler, 100 pound kid, and a hundred pounds lab. Sent from my SM-G920V using Tapatalk |
|
| Author: | MudBuddy77 [ Sun Aug 21, 2016 1:28 pm ] |
| Post subject: | Re: GTR prop confusion |
I just recently built a stage 2, and playing this prop game myself. Hit 32.2 w a beat up worn down stock 3 blade. Solid 30 with a hammer. Wanting to get more speed since I figured I'd be around 34-35 w stage 2 mods. Looks like one of the better options is send a big blade to LA Prop or baggy. Anybody had a hammer worked, polished and all, or the better option to stick with a big blade? |
|
| Author: | MudBuddy77 [ Sun Aug 21, 2016 1:28 pm ] |
| Post subject: | Re: GTR prop confusion |
I just recently built a stage 2, and playing this prop game myself. Hit 32.2 w a beat up worn down stock 3 blade. Solid 30 with a hammer. Wanting to get more speed since I figured I'd be around 34-35 w stage 2 mods. Looks like one of the better options is send a big blade to LA Prop or baggy. Anybody had a hammer worked, polished and all, or the better option to stick with a big blade? |
|
| Author: | JD145 [ Sun Aug 21, 2016 5:09 pm ] |
| Post subject: | Re: GTR prop confusion |
If you're hoping for 34-35 you best stick with a big blade or a 3 blade, and IMO Baggy is the way to go. |
|
| Author: | MudBuddy77 [ Sun Aug 21, 2016 6:04 pm ] |
| Post subject: | Re: GTR prop confusion |
Jd what do you recommend do to a big blade for that kind of speed? Will it still have decent hole shot, also? That hammer is insane out of the hole! Just would like a little more top end. |
|
| Author: | JD145 [ Sun Aug 21, 2016 7:36 pm ] |
| Post subject: | Re: GTR prop confusion |
| Author: | MudBuddy77 [ Sun Aug 21, 2016 8:07 pm ] |
| Post subject: | Re: GTR prop confusion |
Sounds good I'll have to give him a shout and see what he can do. Thanks man |
|
| Author: | mudxxed [ Mon Aug 22, 2016 6:21 pm ] |
| Post subject: | Re: GTR prop confusion |
Im also running 32-33 with stage 2 mods. I think some of it is my hull as well. I just swapped 46 lower pulley on my MB and now with 2 guys w/ worked 3, my holeshot sucks (its decent solo). Havent tested BB with 2 in it yet. It dropped my RPMs down some which is what I wanted, but may need to run the 48 pulley and roll with my 4600. I need some of that holeshot back with the 3. |
|
| Author: | MudBuddy77 [ Mon Aug 22, 2016 8:56 pm ] |
| Post subject: | Re: GTR prop confusion |
I feel ya on that one. I would rather stay with my hammer and have a lot of power out the hole, than to have only top end. I feel like the best of both worlds could be bad from a worked 3 blade but man do they suck in vegetation. |
|
| Page 1 of 2 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|