| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| 3 Blade Mercury Prop durability http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=68461 |
Page 1 of 1 |
| Author: | zschne1 [ Fri Sep 30, 2016 8:24 am ] |
| Post subject: | 3 Blade Mercury Prop durability |
Does anyone have experience with the 3 blade Mercury prop? I had Calen put one on our level 3 EFI, and it hauls ass, but I have my doubts about it holding up throughout the season. The blades seem to be a good bit thinner than the 2 blade props (big blade and hammer). I'm gunna run this one into the ground, but just wondering what kind of life I should expect out of it. |
|
| Author: | T-Bubba [ Fri Sep 30, 2016 1:16 pm ] |
| Post subject: | Re: 3 Blade Mercury Prop durability |
Depends on where you run. Stay out of the sand. |
|
| Author: | Richard in LA [ Fri Sep 30, 2016 6:02 pm ] |
| Post subject: | Re: 3 Blade Mercury Prop durability |
Def thinner than a hammer, but i thought they were close to a BB. Been a while since I had a new BB in my hands. Seems like a stout prop to me |
|
| Author: | Blinduck [ Sun Oct 02, 2016 3:28 pm ] |
| Post subject: | Re: 3 Blade Mercury Prop durability |
Who makes that prop would like to try on my 37 efi boss |
|
| Author: | banded-mallard [ Mon Oct 03, 2016 5:20 am ] |
| Post subject: | Re: 3 Blade Mercury Prop durability |
| Author: | Blinduck [ Mon Oct 03, 2016 7:01 am ] |
| Post subject: | Re: 3 Blade Mercury Prop durability |
Any one have part number for 3 blade prop or where you can get one |
|
| Author: | lastchance [ Mon Oct 03, 2016 7:48 am ] |
| Post subject: | Re: 3 Blade Mercury Prop durability |
| Author: | zschne1 [ Tue Oct 04, 2016 8:15 am ] |
| Post subject: | Re: 3 Blade Mercury Prop durability |
| Author: | zschne1 [ Tue Oct 04, 2016 8:17 am ] |
| Post subject: | Re: 3 Blade Mercury Prop durability |
| Author: | cflhunter [ Sat Oct 22, 2016 7:56 pm ] |
| Post subject: | Re: 3 Blade Mercury Prop durability |
I'm currently running a hammer on a 37 hDr with bps mako kit. What can I expect to gain with the 3 blade mercury delta carries? Boat is a 1754 gator Trax cc with huntdeck. Just wondering if it's worth the money since my prop is brand new. |
|
| Author: | CycloneShaun [ Sun Oct 23, 2016 12:06 am ] |
| Post subject: | Re: 3 Blade Mercury Prop durability |
I have a buddy with a level 3 and a merc 3 blade. He's running high 30's. It sucks in the mud and veggies though. |
|
| Author: | Zeek569 [ Sun Oct 23, 2016 9:16 am ] |
| Post subject: | Re: 3 Blade Mercury Prop durability |
the merc 3 blade is a pretty tuff prop when it comes to sand but the material is soft so if you hit a tree or pipe pretty hard you will get a little dent on the edge. |
|
| Author: | Rosstree27 [ Thu Dec 01, 2016 1:50 pm ] |
| Post subject: | Re: 3 Blade Mercury Prop durability |
Would my rig turn a 3-Blade and gain any speed? Stock 35 Mud Buddy on 1750 Gator Trax W/ Huntdeck? |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|