| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| No trim or reverse http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=69193 |
Page 1 of 1 |
| Author: | GDSArgo [ Sat Dec 10, 2016 11:14 am ] |
| Post subject: | No trim or reverse |
I think I know what the issue is but wanted to see if anyone else had anything else I should check before digging to far into the problem. I have a gen III prodrive when I hit the trim or the reverse switch all I get is a click at the relay under the cover by the pump I'm assuming the relay has gone bad. But wanted some other opinions before I get to far scratching my head chasing electrical demons. Thanks Sent from my iPad using Tapatalk |
|
| Author: | jhebert [ Mon Dec 12, 2016 1:10 pm ] |
| Post subject: | No trim or reverse |
| Author: | teammarshmafia [ Mon Dec 12, 2016 4:39 pm ] |
| Post subject: | Re: No trim or reverse |
Also check your connections on the solenoid. Loosen em up, make sure they are clean, apply some electrical grease, and retighten. I run mine in saltwater regularly and have to do this at least once a year. Sent from my SAMSUNG-SM-G890A using Tapatalk |
|
| Author: | GDSArgo [ Tue Dec 13, 2016 5:17 pm ] |
| Post subject: | Re: No trim or reverse |
Thanks guy little love tap from a hammer got it going but I need to get a spare solenoid so this doesn't happen when I really need reverse or trim. Sent from my iPad using Tapatalk |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|