| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| GTR trans removal http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=70076 |
Page 1 of 1 |
| Author: | Ricerunner [ Fri Mar 17, 2017 9:41 pm ] |
| Post subject: | GTR trans removal |
Anyone have a video of the transmission removal on a GTR. Mainly looking to install a cam. Im mechancially inclinded but have never torn down nor seen anyone do it. Dont want to make mistakes or go about it in a manor to which makes it harder or adds extra steps. Also little things like the potential for raised metal/rust on the edge of the crank at the shaft seal. Thanks in advance. |
|
| Author: | ibfishinb [ Sat Mar 18, 2017 3:01 pm ] |
| Post subject: | Re: GTR trans removal |
I've done it a couple times but no video. Sent from my SM-G920V using Tapatalk |
|
| Author: | LB200 [ Sun Mar 19, 2017 6:35 pm ] |
| Post subject: | Re: GTR trans removal |
I have done it three or four times now unfortunately lol. I still have not seen a video. The transmission is easy to remove actually. The first half just pulls out once You remove the main shaft extension with a gear puller (a bit of a pain in the rear). The second half is held on by 6 3/16 socket head screws. Make sure you seat the Allen wrench in there well and keep good pressure on it. I came close to ruining my day by letting the wrench slip one time! As you can tell I am not the best at describing it but I am glad to help if you want to message me I can give you my number |
|
| Author: | Ricerunner [ Sun Mar 19, 2017 7:49 pm ] |
| Post subject: | GTR trans removal |
I've got a couple guys who has done several but I hate asking for help cause I know they are reluctant and I believe 1 guy is trying to build a business and I am tight for cash. I'd rather do it myself but at the same time I don't want to fudge up something Sent from my iPhone using Tapatalk |
|
| Author: | SCmudder7071 [ Mon Mar 20, 2017 12:10 pm ] |
| Post subject: | Re: GTR trans removal |
It ain't hard. Take your time. Pursley and I are a phone call away if you get in a bind. |
|
| Author: | luckyhat12 [ Fri Aug 04, 2017 2:38 pm ] |
| Post subject: | Re: GTR trans removal |
Does anyone have torque specs for putting the transmission back together? I need to replace my seals on it because I've been out twice and it has blown its oil both times. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|