It is currently Thu Mar 28, 2024 9:04 am




Reply to topic  [ 18 posts ] 
 Gear teeth on my 2012 gtr 
Author Message
MMT Member

Joined: Sun Oct 27, 2013 6:53 pm
Posts: 18
Post Gear teeth on my 2012 gtr
I have a 2012 35 gtr With hydraulic reverse wanting to know how many teeth or on the top pulley and how many teeth is on lower pulley on a stock gtr also what is the prop size and Pitch it is in a two blade and a three blade if any one know


Sent from my iPhone using Tapatalk


Mon Jan 08, 2018 5:41 pm
Profile
MMT F.E.

Joined: Mon Jul 14, 2014 8:19 am
Posts: 981
Post Re: Gear teeth on my 2012 gtr
Take the transmission cover off. It'll have a 48 stamped on either the right or left side if it is 48


Sent from my iPhone using Tapatalk Pro


Mon Jan 08, 2018 6:05 pm
Profile
MMT Member

Joined: Sun Oct 27, 2013 6:53 pm
Posts: 18
Post Re: Gear teeth on my 2012 gtr


Mon Jan 08, 2018 8:24 pm
Profile
MMT F.E.

Joined: Mon Jul 14, 2014 8:19 am
Posts: 981
Post Gear teeth on my 2012 gtr
The bottom is 48. The top is what ever you count to. I don't think the top has ever changed. I think the ones changed around 2012 went from 42 to 48 but I may be backwards.


Sent from my iPhone using Tapatalk Pro


Mon Jan 08, 2018 8:27 pm
Profile
MMT 1000 Club

Joined: Mon Dec 31, 2012 11:07 pm
Posts: 4820
Location: West Monroe, LA
Post Re: Gear teeth on my 2012 gtr
The bottom used to be 45, changed to 48 around that time. The top is 36, I think. Marcus will be along shortly to correct me if it's 38.

#CFFITR
#TheGhostBoat
#whoneedsphysicsihaveamudmotor


Mon Jan 08, 2018 8:36 pm
Profile
MMT Member

Joined: Sun Oct 27, 2013 6:53 pm
Posts: 18
Post Re: Gear teeth on my 2012 gtr


Mon Jan 08, 2018 8:37 pm
Profile
MMT 1000 Club

Joined: Mon Dec 31, 2012 11:07 pm
Posts: 4820
Location: West Monroe, LA
Post Re: Gear teeth on my 2012 gtr
12x10

#CFFITR
#TheGhostBoat
#whoneedsphysicsihaveamudmotor


Mon Jan 08, 2018 8:39 pm
Profile
MMT Member

Joined: Sun Oct 27, 2013 6:53 pm
Posts: 18
Post Re: Gear teeth on my 2012 gtr


Mon Jan 08, 2018 8:40 pm
Profile
MMT F.E.

Joined: Mon Jul 14, 2014 8:19 am
Posts: 981
Post Gear teeth on my 2012 gtr
If Russ says it is, then it is. Thanks for the correction on 45 and not 42. Drinking beers and watching Alabama hopefully lose doesn't make for a strong memory of obscure facts.


Sent from my iPhone using Tapatalk Pro


Mon Jan 08, 2018 8:43 pm
Profile
MMT Member

Joined: Sun Oct 27, 2013 6:53 pm
Posts: 18
Post Gear teeth on my 2012 gtr
If u always have to push away with the tiller handle from u which way should I bend the tabs thanks


Sent from my iPhone using Tapatalk


Mon Jan 08, 2018 8:48 pm
Profile
MMT F.E.

Joined: Mon Jul 14, 2014 8:19 am
Posts: 981
Post Re: Gear teeth on my 2012 gtr
Away from you. Check your weight distribution first and also prop plays into effect. Since you have a worn prop, may want to wait till you have a new one and see how that plays in.


Sent from my iPhone using Tapatalk Pro


Mon Jan 08, 2018 8:51 pm
Profile
MMT 1000 Club

Joined: Mon Dec 31, 2012 11:07 pm
Posts: 4820
Location: West Monroe, LA
Post Re: Gear teeth on my 2012 gtr
Trim level affects the felt torque a lot, and a fresh prop will change where it's trimmed for best thrust. Unless you're gonna use that prop a while, just wait on the bending stuff.

#CFFITR
#TheGhostBoat
#whoneedsphysicsihaveamudmotor


Mon Jan 08, 2018 8:55 pm
Profile
MMT Member

Joined: Sun Oct 27, 2013 6:53 pm
Posts: 18
Post Re: Gear teeth on my 2012 gtr
Thanks baggy’s got my prop now to get work


Sent from my iPhone using Tapatalk


Mon Jan 08, 2018 9:09 pm
Profile
MMT Elite Member
User avatar

Joined: Wed Jan 14, 2009 7:23 am
Posts: 6233
Location: Tarkington, TX
Post Re: Gear teeth on my 2012 gtr
Top gear is 38 Current bottom is 48. Used to be 45 lower, but was changed around 2011-2012 ish. The CDI motors additional charging system put more load on these units aswell as larger boats, 3 blade propellers were coming out; so they needed a lower gear ratio.
38/45 = 1.18:1
38/48 = 1.26:1

_________________
Bayou Surface Drive
337-351-0362
Tarkington, TX 77327


Tue Jan 09, 2018 6:18 am
Profile
MMT F.E.
User avatar

Joined: Tue Aug 26, 2014 10:36 am
Posts: 822
Location: Jefferson TX
Post Re: Gear teeth on my 2012 gtr
I have a 2011 GTR CDI

its a 38/45 and came stock with a power tech 12x10

_________________
SEAARK FX 2472 CC Merc 150HP 4Stroke(CypressCadillac)
Uncle J Custom - 19x54 CC Skiff w/40XD GTR


Tue Jan 09, 2018 10:39 am
Profile
MMT 1000 Club
User avatar

Joined: Mon Nov 15, 2010 4:50 pm
Posts: 2282
Location: Circumcised, Louisiana
Post Re: Gear teeth on my 2012 gtr


Tue Jan 09, 2018 1:51 pm
Profile
MMT Member

Joined: Sun Oct 27, 2013 6:53 pm
Posts: 18
Post Re: Gear teeth on my 2012 gtr


Thu Jan 11, 2018 7:41 pm
Profile
MMT Elite Member
User avatar

Joined: Wed Jan 14, 2009 7:23 am
Posts: 6233
Location: Tarkington, TX
Post Re: Gear teeth on my 2012 gtr
Port side top of belt box.

_________________
Bayou Surface Drive
337-351-0362
Tarkington, TX 77327


Fri Jan 12, 2018 7:36 am
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 18 posts ] 

Who is online

Users browsing this forum: No registered users and 181 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: