| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| Powertech 3 Blade http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=73122 |
Page 1 of 1 |
| Author: | daddyflea [ Tue Oct 16, 2018 12:46 pm ] |
| Post subject: | Powertech 3 Blade |
I was so impressed with the job Baggy did on my 2 Blade I called him about working my 3 Blade. He is not too impressed with the Powertech 3 blade. He said he could improve it but recommended I get a new Prop that is now being offered by Gator Tail. Anybody know what he is talking about? |
|
| Author: | Wchauvin [ Tue Oct 16, 2018 1:59 pm ] |
| Post subject: | Re: Powertech 3 Blade |
He is talking about the mercury rapid prop. Worked, it's the fastest 3 blade on the market. Bumped my speed up 3 mph from a worked merc 3 when I switched to the worked merc rapid |
|
| Author: | daddyflea [ Tue Oct 16, 2018 2:44 pm ] |
| Post subject: | Re: Powertech 3 Blade |
| Author: | Wchauvin [ Tue Oct 16, 2018 4:52 pm ] |
| Post subject: | Re: Powertech 3 Blade |
Sure don't, it's too new. They sent listed anywhere that I know of. Just call gatortail and tell them you want a rapid prop. I believe they are going for 300 there |
|
| Author: | dead animal [ Tue Oct 16, 2018 6:31 pm ] |
| Post subject: | Re: Powertech 3 Blade |
just buy a 90hp outboard if u want to go fast. |
|
| Author: | Malachi [ Tue Oct 16, 2018 6:58 pm ] |
| Post subject: | Re: Powertech 3 Blade |
Does this prop hav ca55 11p stamped on it? |
|
| Author: | daddyflea [ Tue Oct 16, 2018 7:25 pm ] |
| Post subject: | Re: Powertech 3 Blade |
| Author: | Wchauvin [ Tue Oct 16, 2018 8:15 pm ] |
| Post subject: | Re: Powertech 3 Blade |
I believe it comes 11.5 pitch unworked but I'm unsure. Mine was worked immediately after purchase because I had a friends prop I tried as a comparison. The prop is made by mercury. Gatortail sells it. Delta in Morgan city sells it as well, worked and unworked |
|
| Author: | Wchauvin [ Tue Oct 16, 2018 8:19 pm ] |
| Post subject: | Re: Powertech 3 Blade |
Only 3 people I know run the prop currently, a buddy with a highly modded willey fast motor, a guy in Morgan city, and me. It's by far the fastest prop I've ran on my boat. Two people, my dog, and a hunt load, I run 34-35. Completely empty, I'm running 37-38 on my 1848 custom crawfish skiff. I'm running it 12 pitch, cupped, polished, sharpened, and with a cut skeg and very small mods on a 40GTR XD |
|
| Author: | Malachi [ Tue Oct 16, 2018 8:31 pm ] |
| Post subject: | Re: Powertech 3 Blade |
I believe this is the prop I am running as well. Came with the gator tail bought it from delta. Can one of you confirm the numbers I gave in the previous post? |
|
| Author: | Wchauvin [ Tue Oct 16, 2018 8:33 pm ] |
| Post subject: | Re: Powertech 3 Blade |
If you call baggy, he can tell you. My prop is high polished, so there are no numbers on it besides my pitch and my initials bro |
|
| Author: | Malachi [ Tue Oct 16, 2018 8:47 pm ] |
| Post subject: | Re: Powertech 3 Blade |
I was on the phone with him today asking for a recommendation on a 2 blade. I didnt even think to ask about my current prop. He suggested either a fat blade or the 2 blade that delta carries (not the big blade or hammer). Do you know which 2 blade that is? I'll probably let him work this 3 blade while I'm at it though. |
|
| Author: | Wchauvin [ Tue Oct 16, 2018 8:56 pm ] |
| Post subject: | Re: Powertech 3 Blade |
I don't know the name of the prop but it's the two blade that comes with the gatortail motors now if you order the motor with a two blade. I believe it is made by powertech |
|
| Author: | lastchance [ Wed Oct 17, 2018 10:58 am ] |
| Post subject: | Re: Powertech 3 Blade |
| Author: | Wchauvin [ Wed Oct 17, 2018 2:56 pm ] |
| Post subject: | Re: Powertech 3 Blade |
I have one with my old mercury prop that was slower than the current prop I can send you if you pm me. On that video, we had two people, two limits of red fish, and a full fishing load. Hit me up and I'll send it to you |
|
| Author: | Wchauvin [ Fri Oct 26, 2018 12:29 pm ] |
| Post subject: | Re: Powertech 3 Blade |
Here is a gps this morning with two people, a full ice chest my boy is sitting on, 12 gallon tank full, and both my front storages were filled with tools because we were working on the property |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|