| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| hammer on hdr 40 efi? http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=41&t=73359 |
Page 1 of 1 |
| Author: | bpalbers [ Thu Dec 20, 2018 10:01 am ] |
| Post subject: | hammer on hdr 40 efi? |
anyone run a hammer on a stock hdr 40 efi. have a 1854 prodigy with 25th hdr can spin a big blade to 4400 and beyond just looking for a little more hole shot under load. have a raptor also although its alot smoother and handles better not giving me the get up and go id like. |
|
| Author: | GNSPEED [ Thu Dec 20, 2018 6:28 pm ] |
| Post subject: | Re: hammer on hdr 40 efi? |
Hammer will get on plane quick but is about 2mph slower. |
|
| Author: | Wchauvin [ Thu Dec 20, 2018 7:39 pm ] |
| Post subject: | Re: hammer on hdr 40 efi? |
Gnspeed is right. I run a fat blade on my GTR 40, which is almost identical to the hammer and it is a couple slower on the top end but the holeshot is second to none and it carries a load extremely well |
|
| Author: | Roostertail3 [ Fri Dec 21, 2018 7:02 am ] |
| Post subject: | Re: hammer on hdr 40 efi? |
Yes you can run a hammer on the new 40 with no problems. Some people say they can turn them with stick 37s, I call BS on being able to turn it effectively on the stock 37’s. |
|
| Author: | MaXXis85 [ Fri Dec 21, 2018 7:44 am ] |
| Post subject: | Re: hammer on hdr 40 efi? |
You might be able to turn it, BUT its going to lug the motor.... |
|
| Author: | DENNYEDWARDS [ Fri Dec 21, 2018 9:51 am ] |
| Post subject: | Re: hammer on hdr 40 efi? |
What rpm is concidering luging motor? I think most stock Big Block Briggs build their best power between 3600-3800 rpm. |
|
| Author: | Wchauvin [ Fri Dec 21, 2018 1:01 pm ] |
| Post subject: | Re: hammer on hdr 40 efi? |
I run my fat blade at 4500 |
|
| Author: | DENNYEDWARDS [ Fri Dec 21, 2018 2:26 pm ] |
| Post subject: | Re: hammer on hdr 40 efi? |
I can run my Hammer upto the 4700 rpm rev. limiter in my coils, but very seldom do it. My motor is getting some hrs. on it and I want it to last a few more seasons. I run 3800-4000 rpm . Going to try a Rapture this summer, to see how it does. Motor is 45 mag. with BPS internals and heads. |
|
| Author: | Wchauvin [ Fri Dec 21, 2018 8:21 pm ] |
| Post subject: | Re: hammer on hdr 40 efi? |
Instead of the raptor, run a mercury rapid. You will thank me for this information lol |
|
| Author: | DENNYEDWARDS [ Sat Dec 22, 2018 11:45 am ] |
| Post subject: | Re: hammer on hdr 40 efi? |
Tried a Mercury 3 Bld, was on rev. limiter at about 2/3 throttle. Thought maybe raptor with its 1" extra pitch may help. My rig is very light, and takes very little to plane it. |
|
| Author: | Wchauvin [ Sat Dec 22, 2018 8:16 pm ] |
| Post subject: | Re: hammer on hdr 40 efi? |
The merc 3 blade and the merc rapid are two completely different props. The rapid is a 12 pitch out the box if I remember correctly |
|
| Author: | bpalbers [ Wed Dec 26, 2018 12:17 pm ] |
| Post subject: | Re: hammer on hdr 40 efi? |
| Author: | Wchauvin [ Wed Dec 26, 2018 2:14 pm ] |
| Post subject: | Re: hammer on hdr 40 efi? |
Call gatortail and you can get them for 300 directly. Send it to baggy after you get it |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|