I figured - I thought he meant like a 36 quart Yeti -
https://www.youtube.com/watch?v=IuGAggeUWb0
| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| GTR 37 EFI on 18x60 Go Devil **re-powered** http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=5&t=60709 |
Page 2 of 5 |
| Author: | brstanle [ Thu Mar 12, 2015 10:12 am ] |
| Post subject: | Re: GTR 37 EFI on 18x60 Go Devil **re-powered** |
If it's being tough on left turns, I would imagine you would move the motor to starboard. |
|
| Author: | Quack N Stack [ Thu Mar 12, 2015 10:27 am ] |
| Post subject: | Re: GTR 37 EFI on 18x60 Go Devil **re-powered** |
| Author: | Gameover [ Thu Mar 12, 2015 10:31 am ] |
| Post subject: | Re: GTR 37 EFI on 18x60 Go Devil **re-powered** |
yes and if it works you can always just silicone the holes shut where old bolts went |
|
| Author: | Quack N Stack [ Thu Mar 12, 2015 10:50 am ] |
| Post subject: | Re: GTR 37 EFI on 18x60 Go Devil **re-powered** |
Thank you very much. Im going to have to wait till i get home to do it. I may just pull the bolts out and slide it all the way over on the transom then have my neighbor weld the holes up the slide it back to where it needs to be |
|
| Author: | baron von [ Thu Mar 12, 2015 10:56 am ] |
| Post subject: | Re: GTR 37 EFI on 18x60 Go Devil **re-powered** |
I have a big/heavy 18x60 also and I think I got best results moving it the other way QS - I'll recheck it when I get out to the barn tonight |
|
| Author: | NinjaButtpirate [ Thu Mar 12, 2015 10:57 am ] |
| Post subject: | Re: GTR 37 EFI on 18x60 Go Devil **re-powered** |
| Author: | 270Handiman [ Thu Mar 12, 2015 11:13 am ] |
| Post subject: | Re: GTR 37 EFI on 18x60 Go Devil **re-powered** |
The holes should be well above the waterline. No need to weld them, silicone will be fine. |
|
| Author: | Quack N Stack [ Thu Mar 12, 2015 11:20 am ] |
| Post subject: | Re: GTR 37 EFI on 18x60 Go Devil **re-powered** |
| Author: | NinjaButtpirate [ Thu Mar 12, 2015 11:28 am ] |
| Post subject: | Re: GTR 37 EFI on 18x60 Go Devil **re-powered** |
| Author: | Quack N Stack [ Thu Mar 12, 2015 11:35 am ] |
| Post subject: | Re: GTR 37 EFI on 18x60 Go Devil **re-powered** |
Fighting to turn left? Im confused, move the motor left or right..? Its torqueing towards me, so its hard to make a left turn in the boat. |
|
| Author: | toddh [ Thu Mar 12, 2015 11:45 am ] |
| Post subject: | Re: GTR 37 EFI on 18x60 Go Devil **re-powered** |
^^^^That is what mine is doing. Which way to move motor? |
|
| Author: | baron von [ Thu Mar 12, 2015 11:56 am ] |
| Post subject: | Re: GTR 37 EFI on 18x60 Go Devil **re-powered** |
| Author: | NinjaButtpirate [ Thu Mar 12, 2015 12:28 pm ] |
| Post subject: | Re: GTR 37 EFI on 18x60 Go Devil **re-powered** |
| Author: | Gameover [ Thu Mar 12, 2015 12:43 pm ] |
| Post subject: | Re: GTR 37 EFI on 18x60 Go Devil **re-powered** |
Fuck all the left and rights if the motor pushing to you move the motor away from you on the transom, as I mentioned before |
|
| Author: | b.latiolais [ Thu Mar 12, 2015 12:44 pm ] |
| Post subject: | Re: GTR 37 EFI on 18x60 Go Devil **re-powered** |
| Author: | b.latiolais [ Thu Mar 12, 2015 12:45 pm ] |
| Post subject: | Re: GTR 37 EFI on 18x60 Go Devil **re-powered** |
| Author: | Quack N Stack [ Thu Mar 12, 2015 2:08 pm ] |
| Post subject: | Re: GTR 37 EFI on 18x60 Go Devil **re-powered** |
Lol okay im just trying to make sure i only want to do this once |
|
| Author: | Ducaholic [ Thu Mar 12, 2015 3:02 pm ] |
| Post subject: | Re: GTR 37 EFI on 18x60 Go Devil **re-powered** |
Put a 36 on that skeg and pull... |
|
| Author: | Quack N Stack [ Thu Mar 12, 2015 3:51 pm ] |
| Post subject: | Re: GTR 37 EFI on 18x60 Go Devil **re-powered** |
Lol^ I moved down 1 pin hole and that helped alot. Lost alittle speed abd even trimed all the way up it still wasn't throwing a rooster tail |
|
| Author: | Quack N Stack [ Thu Mar 12, 2015 4:12 pm ] |
| Post subject: | Re: GTR 37 EFI on 18x60 Go Devil **re-powered** |
Lost about 300 RPMS and 2-3mph on top end |
|
| Author: | brstanle [ Thu Mar 12, 2015 4:17 pm ] |
| Post subject: | Re: GTR 37 EFI on 18x60 Go Devil **re-powered** |
yep, sounds like you ran out of up-trim. |
|
| Author: | Quack N Stack [ Thu Mar 12, 2015 4:34 pm ] |
| Post subject: | Re: GTR 37 EFI on 18x60 Go Devil **re-powered** |
I like that the torque is gone..i dont like loosening speed.. |
|
| Author: | Gigafowl [ Thu Mar 12, 2015 5:38 pm ] |
| Post subject: | Re: GTR 37 EFI on 18x60 Go Devil **re-powered** |
| Author: | Quack N Stack [ Thu Mar 12, 2015 6:15 pm ] |
| Post subject: | Re: GTR 37 EFI on 18x60 Go Devil **re-powered** |
| Author: | Gigafowl [ Thu Mar 12, 2015 6:28 pm ] |
| Post subject: | Re: GTR 37 EFI on 18x60 Go Devil **re-powered** |
I figured - I thought he meant like a 36 quart Yeti - https://www.youtube.com/watch?v=IuGAggeUWb0 |
|
| Author: | Quack N Stack [ Thu Mar 12, 2015 6:36 pm ] |
| Post subject: | Re: GTR 37 EFI on 18x60 Go Devil **re-powered** |
How many times are you gonna post that video on here? Lol it wasn't even mine it was a friend of mines yeti..oh and btw is .22lr proof too On a side not i just got done hanging limb lines and reverse is absolutely amazing no idea what i was missing |
|
| Author: | NinjaButtpirate [ Thu Mar 12, 2015 6:41 pm ] |
| Post subject: | Re: GTR 37 EFI on 18x60 Go Devil **re-powered** |
| Author: | Gigafowl [ Thu Mar 12, 2015 6:41 pm ] |
| Post subject: | Re: GTR 37 EFI on 18x60 Go Devil **re-powered** |
| Author: | Quack N Stack [ Thu Mar 12, 2015 6:45 pm ] |
| Post subject: | Re: GTR 37 EFI on 18x60 Go Devil **re-powered** |
It might be idk if he put it on there or not. The dog chewed the lid up and ruined it so we decided we'd see exactly what all they'd hold up to |
|
| Author: | WhoDat88 [ Thu Mar 12, 2015 6:45 pm ] |
| Post subject: | Re: GTR 37 EFI on 18x60 Go Devil **re-powered** |
| Author: | Quack N Stack [ Thu Mar 12, 2015 6:48 pm ] |
| Post subject: | Re: GTR 37 EFI on 18x60 Go Devil **re-powered** |
| Author: | WhoDat88 [ Thu Mar 12, 2015 6:53 pm ] |
| Post subject: | Re: GTR 37 EFI on 18x60 Go Devil **re-powered** |
| Author: | Quack N Stack [ Thu Mar 12, 2015 6:56 pm ] |
| Post subject: | Re: GTR 37 EFI on 18x60 Go Devil **re-powered** |
| Author: | brstanle [ Thu Mar 12, 2015 6:57 pm ] |
| Post subject: | Re: GTR 37 EFI on 18x60 Go Devil **re-powered** |
I always thought it was like Beetlejuice... he just turned up if you say his name too many times. |
|
| Author: | Gigafowl [ Thu Mar 12, 2015 7:02 pm ] |
| Post subject: | Re: GTR 37 EFI on 18x60 Go Devil **re-powered** |
viewtopic.php?f=5&t=56496&p=769483&hilit=skeg+wedge#p769483 Your not the first to have tiller torque issues with the new improved cast outdrive.... Get that addon wedge.... |
|
| Author: | brstanle [ Thu Mar 12, 2015 7:07 pm ] |
| Post subject: | Re: GTR 37 EFI on 18x60 Go Devil **re-powered** |
If his is anything like mine, it's not when running in a straight line. Mine will hold a straight line just fine and not beat me up at all. Turning to the right is easy as well. Turning to the left? Gotta put a foot up on the opposite side and yank that tiller to come around. To get it to straighten back out you have to grit and bear down and shoulder press the tiller away from you (maybe a little dramatic, but left turns are very difficult). |
|
| Author: | Quack N Stack [ Thu Mar 12, 2015 7:15 pm ] |
| Post subject: | Re: GTR 37 EFI on 18x60 Go Devil **re-powered** |
Since you cant bend cast, would it make any difference if i got someone to put a bead of weld or two to add onto the bend in the skeg? |
|
| Author: | brstanle [ Thu Mar 12, 2015 7:17 pm ] |
| Post subject: | Re: GTR 37 EFI on 18x60 Go Devil **re-powered** |
Does your skeg not have a flare on the end on the left side? |
|
| Author: | Quack N Stack [ Thu Mar 12, 2015 7:28 pm ] |
| Post subject: | Re: GTR 37 EFI on 18x60 Go Devil **re-powered** |
Yeah it does. I just thought maybe if it had alittle more to it tjat it might help force the motor the other way. |
|
| Author: | Gigafowl [ Thu Mar 12, 2015 7:39 pm ] |
| Post subject: | Re: GTR 37 EFI on 18x60 Go Devil **re-powered** |
It has been mentioned by many new 2015 GTR buyers.... viewtopic.php?f=2&t=54296&p=739582&hilit=wedge+tiller#p739582 viewtopic.php?f=5&t=54312&p=738984&hilit=gtr+wedge#p738984 Saw a bolt on wedge somewhere.... |
|
| Page 2 of 5 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|