| It is currently Sun May 11, 2025 7:24 pm |
|
Page 1 of 1 |
[ 13 posts ] |
| Print view | Previous topic | Next topic |
1646HD GTB with stock 35GTR
| Author | Message |
|---|---|
|
MMT Pro Member
Joined: Fri Dec 23, 2011 7:33 pm Posts: 283 
|
 1646HD GTB with stock 35GTRBoat: 1646 Gator Tall with huntdeck
motor: 35 GTR with crossover exhaust Testing conditions: slight chop water Deep water: me (130 lbs) and 12 gallons of gas 29 . . . With me girlfriend 12 gallons of gas and ice chest full of ice. Plus 2 batteries 27.1 Shallow water: me and twin brother 12 gallons of gas 6 to 12in of water shallow hit 29 and 30 same load but by myself. Motor is in the middle hole. Wold I get a MPH or 2 faster if i moved it up to the top hole? Not really running any mud right now. _________________ 1646HD GTB and a 35GTR w/ with Calens stage 1 |
| Mon Feb 20, 2012 9:44 am |
|
|
|
|
MMT Pro Member
Joined: Mon Sep 07, 2009 1:46 am Posts: 200
|
Re: 1646HD GTB with stock 35GTR Those are good speeds.
What are your RPM's? I ran mine in the first hole when it was stock and got better speeds and RPM's. I ma now in the second hole after A stage 1 done by Calen. (Heads, Cam, and Exhaust) Gotta say that my boat is a completely different animal after the mods. Calen has my boat now and putting the Hi Rev coils on, so if and when I make up my mind on a Mikuni, I will not be to limited by the regular CDI coils. _________________ 1854 Extreme CC w/ a 35 GTR a do everything machine!!!! |
| Mon Feb 20, 2012 10:29 am |
|
|
|
|
MMT Pro Member
Joined: Fri Dec 23, 2011 7:33 pm Posts: 283
|
Re: 1646HD GTB with stock 35GTR I usually run it around 3890 to 3900. I thought about a Carb after reading what some guys on here was saying about them
_________________ 1646HD GTB and a 35GTR w/ with Calens stage 1 |
| Mon Feb 20, 2012 10:51 am |
|
|
|
|
MMT Elite Member  Joined: Wed Sep 21, 2011 2:53 pm Posts: 5077 Location: The duck Mecca called Ga!
|
Re: 1646HD GTB with stock 35GTR def. start with carb and exhaust. Then look at doing work on the heads.
_________________ HOTSAUCE170 wrote: I've never gone to Seminole for the amenities/luxury the two reasons I go down there are to kill shit and get fucked up with like minded individuals aka OG'S. If you want to swirl wine and stay in a room where politics and investment diversity are discussed (with no roaches) lake lanier is near Atlanta. If you wanna have an awesome time and maybe stay in a room where children were conceived on one side and someone got stabbed over an 8-ball on the other come on down I got a can of raid. 
|
| Mon Feb 20, 2012 5:27 pm |
|
|
|
|
MMT Pro Member
Joined: Tue Mar 15, 2011 11:15 pm Posts: 238 Location: Port Neches, SETX
|
Re: 1646HD GTB with stock 35GTR Very good speeds.
Thanks for sharing, I will seriously consider a similar set up when I look to get a mud rig. |
| Mon Feb 20, 2012 5:35 pm |
|
|
|
|
MMT Sponsor
Joined: Tue Jan 13, 2009 7:07 pm Posts: 16608
|
1646HD GTB with stock 35GTR If you want more power and speed all is needed is heads and cam
_________________ 17x48 extreme stage 2 GTR 20X60 DUAL RIG BOWFISHING ADDITION http://www.scalesandtailsbowfishing.com |
| Mon Feb 20, 2012 6:06 pm |
|
|
|
|
MMT Pro Member
Joined: Mon Sep 07, 2009 1:46 am Posts: 200
|
Re: 1646HD GTB with stock 35GTR ^X2 Those mods were a game changer. Can't say the Carb wouldn't have done well also, but the normal trend on this site is Heads and Cam. But I am sure that I will be getting the carb on there before long, to help when I am trimmed way down in the shit. And to have the throttle response.
_________________ 1854 Extreme CC w/ a 35 GTR a do everything machine!!!! |
| Mon Feb 20, 2012 10:31 pm |
|
|
|
|
MMT Pro Member
Joined: Fri Dec 23, 2011 7:33 pm Posts: 283
|
Re: 1646HD GTB with stock 35GTR What kinda motor life are we looking at here with cam, Carb, and heads? Also what Rpms will i be running?
_________________ 1646HD GTB and a 35GTR w/ with Calens stage 1 |
| Tue Feb 21, 2012 5:35 am |
|
|
|
|
MMT Elite Member  Joined: Fri Oct 09, 2009 1:50 pm Posts: 9673 Location: New Iberia, La.
|
Re: 1646HD GTB with stock 35GTR |
| Tue Feb 21, 2012 5:44 am |
|
|
|
|
MMT Pro Member
Joined: Fri Dec 23, 2011 7:33 pm Posts: 283
|
Re: 1646HD GTB with stock 35GTR That's sounds pretty good . . . What would the cost be about for those 3 mods?
_________________ 1646HD GTB and a 35GTR w/ with Calens stage 1 |
| Tue Feb 21, 2012 6:26 am |
|
|
|
|
MMT Elite Member Joined: Fri Oct 09, 2009 1:50 pm Posts: 9673 Location: New Iberia, La.
|
Re: 1646HD GTB with stock 35GTR PM Calen...not real sure what the going rate is these days. I reread your post.I don't have a minkuni yet but the stock carb is jetted.
|
| Tue Feb 21, 2012 6:35 am |
|
|
|
|
MMT 1000 Club  Joined: Thu Mar 11, 2010 8:25 pm Posts: 1588 Location: South Louisiana
|
Re: 1646HD GTB with stock 35GTR |
| Wed Feb 22, 2012 12:51 pm |
|
|
|
|
MMT Pro Member
Joined: Fri Dec 23, 2011 7:33 pm Posts: 283
|
Re: 1646HD GTB with stock 35GTR Yea he's who I got the bony from proly goin to give him a call next week
_________________ 1646HD GTB and a 35GTR w/ with Calens stage 1 |
| Wed Feb 22, 2012 2:45 pm |
|
|
|
|
|
Page 1 of 1 |
[ 13 posts ] |
|
All times are UTC - 6 hours |
Who is online |
Users browsing this forum: No registered users and 86 guests |
| You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum |