| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| 1646HD GTB with stock 35GTR http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=5&t=26937 |
Page 1 of 1 |
| Author: | Rocketman [ Mon Feb 20, 2012 9:44 am ] |
| Post subject: | 1646HD GTB with stock 35GTR |
Boat: 1646 Gator Tall with huntdeck motor: 35 GTR with crossover exhaust Testing conditions: slight chop water Deep water: me (130 lbs) and 12 gallons of gas 29 . . . With me girlfriend 12 gallons of gas and ice chest full of ice. Plus 2 batteries 27.1 Shallow water: me and twin brother 12 gallons of gas 6 to 12in of water shallow hit 29 and 30 same load but by myself. Motor is in the middle hole. Wold I get a MPH or 2 faster if i moved it up to the top hole? Not really running any mud right now. |
|
| Author: | da_quack_meister [ Mon Feb 20, 2012 10:29 am ] |
| Post subject: | Re: 1646HD GTB with stock 35GTR |
Those are good speeds. What are your RPM's? I ran mine in the first hole when it was stock and got better speeds and RPM's. I ma now in the second hole after A stage 1 done by Calen. (Heads, Cam, and Exhaust) Gotta say that my boat is a completely different animal after the mods. Calen has my boat now and putting the Hi Rev coils on, so if and when I make up my mind on a Mikuni, I will not be to limited by the regular CDI coils. |
|
| Author: | Rocketman [ Mon Feb 20, 2012 10:51 am ] |
| Post subject: | Re: 1646HD GTB with stock 35GTR |
I usually run it around 3890 to 3900. I thought about a Carb after reading what some guys on here was saying about them |
|
| Author: | mizzippi jb [ Mon Feb 20, 2012 5:27 pm ] |
| Post subject: | Re: 1646HD GTB with stock 35GTR |
def. start with carb and exhaust. Then look at doing work on the heads. |
|
| Author: | austinabear [ Mon Feb 20, 2012 5:35 pm ] |
| Post subject: | Re: 1646HD GTB with stock 35GTR |
Very good speeds. Thanks for sharing, I will seriously consider a similar set up when I look to get a mud rig. |
|
| Author: | deltaduckmaster [ Mon Feb 20, 2012 6:06 pm ] |
| Post subject: | 1646HD GTB with stock 35GTR |
If you want more power and speed all is needed is heads and cam |
|
| Author: | da_quack_meister [ Mon Feb 20, 2012 10:31 pm ] |
| Post subject: | Re: 1646HD GTB with stock 35GTR |
^X2 Those mods were a game changer. Can't say the Carb wouldn't have done well also, but the normal trend on this site is Heads and Cam. But I am sure that I will be getting the carb on there before long, to help when I am trimmed way down in the shit. And to have the throttle response. |
|
| Author: | Rocketman [ Tue Feb 21, 2012 5:35 am ] |
| Post subject: | Re: 1646HD GTB with stock 35GTR |
What kinda motor life are we looking at here with cam, Carb, and heads? Also what Rpms will i be running? |
|
| Author: | msm8281 [ Tue Feb 21, 2012 5:44 am ] |
| Post subject: | Re: 1646HD GTB with stock 35GTR |
| Author: | Rocketman [ Tue Feb 21, 2012 6:26 am ] |
| Post subject: | Re: 1646HD GTB with stock 35GTR |
That's sounds pretty good . . . What would the cost be about for those 3 mods? |
|
| Author: | msm8281 [ Tue Feb 21, 2012 6:35 am ] |
| Post subject: | Re: 1646HD GTB with stock 35GTR |
PM Calen...not real sure what the going rate is these days. I reread your post.I don't have a minkuni yet but the stock carb is jetted. |
|
| Author: | jordy [ Wed Feb 22, 2012 12:51 pm ] |
| Post subject: | Re: 1646HD GTB with stock 35GTR |
| Author: | Rocketman [ Wed Feb 22, 2012 2:45 pm ] |
| Post subject: | Re: 1646HD GTB with stock 35GTR |
Yea he's who I got the bony from proly goin to give him a call next week |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|