It is currently Tue May 06, 2025 5:08 pm




Reply to topic  [ 14 posts ] 
 Uncle J 17x54 review 
Author Message
MMT Addict
User avatar

Joined: Sat Oct 30, 2010 1:17 pm
Posts: 578
Location: Monroeville, Alabama
Post Uncle J 17x54 review
Well I have now had my rig for almost 4 months now. It is a 17x54, 3/16th bottom, tapered chine, removable 7ft rod/gun box, removable grab bar with cup holder, drivers box, and flush deck with dry storage. I had never had the chance to drive, ride in, or test any other rigs until i got mine so i figured i would just wait till I had time to put some hours on mine and spend some time around other rigs as well. So far i like everything about it, it has performed great in all the areas i hunt, from rough waters on the causeway and mobile river to the flooded timber at my camp over in Mississippi. The boat floats high and the tapered chine really makes it bite in on sharp turns. Now for the motor, its a GTR 35 with rev. plate and Jason hooked me up with one of Calen's stage 1 kits which is just awesome. Jason told me if i had the extra cash it would be well worth it and i really didnt understand but i said what the hell lets do it. Now being around some stock motors i see it really made a night and day difference. The load carry has surprised me, I knew a 18ft would carry a load better but i usually dont have more than 3 people with me so this is all i need.

As far as speeds, with a little chop going down river with 2 dozen decoys, 12 gals of gas, 50qt yeti with cold snacks, rest of the gear and my fat ass (210 lbs) 33-33.7 @4000- 4100 rmp. I saw a little higher numbers but it was perfect condictions and just blips. Taking the cooler out and adding another person (190 lbs) with gear and dog(60 lbs) really didnt change much,wot was still over 33mph

with water slick as glass down river, 12 gals of gas, myself, a friend (225 lbs), his little brother ( 120 lbs maybe), cooler, and gear 32-32.8 and a few higher blips

Now here was the test, me, 3 other people and the dog went to the camp to hunt Chotard lake and the flooded timber. I was pleased needless to say. We crammed us 4 and the dog( better than 750 lbs), maybe 1/2 tank of gas, our gear, and blind. I had to run it balls to the wall and i had to shift my load around several times till i got it right, saw numbers between 27.4 to 28 .2 blips.

So my hats off to Jason and his crew for the great job they did on my boat and to Calen for the awesome job on my motor and his 100% costomer service

Jason would get a 100% on his customer service but instead he is getting a 95% b/c of his bullshit and trash talk during the BCS national championship........... ROLL TIDE ole boy :D


You do not have the required permissions to view the files attached to this post.

_________________
Uncle J 17x54
GTR 35


Tue Feb 07, 2012 1:00 am
Profile
MMT 1000 Club
User avatar

Joined: Wed Feb 09, 2011 1:56 pm
Posts: 1646
Location: Chauvin
Post Re: Uncle J 17x54 review
Nice rig! Good speeds too! Congrats!


Tue Feb 07, 2012 1:35 am
Profile
MMT F.E.
User avatar

Joined: Fri Oct 01, 2010 9:22 pm
Posts: 959
Location: Spurger Tx.
Post Re: Uncle J 17x54 review
Thats a good looking boat kinda reminds me of mine lol

_________________
18x54 WC custom
36PD EFI


Tue Feb 07, 2012 7:32 am
Profile
MMT Addict
User avatar

Joined: Sat Oct 30, 2010 1:17 pm
Posts: 578
Location: Monroeville, Alabama
Post Re: Uncle J 17x54 review
Thanks fellas, I love it, caint seem to stay out of it.

_________________
Uncle J 17x54
GTR 35


Wed Feb 08, 2012 6:04 pm
Profile
MMT Pro Member

Joined: Thu Jan 13, 2011 10:44 am
Posts: 120
Location: lower alabama
Post Re: Uncle J 17x54 review
nice ride Nic

_________________
1748 uncle j skiff gtr 35


Sat Feb 11, 2012 5:56 am
Profile
MMT Super Elite Member

Joined: Mon Oct 19, 2009 6:38 pm
Posts: 10201
Location: SETX
Post Re: Uncle J 17x54 review
So this is the boat Calen was hurrying me up for a clutch cover, hey man nice rig and some really good speeds. Enjoy it!


Sat Feb 11, 2012 7:03 am
Profile
MMT Addict
User avatar

Joined: Sat Oct 30, 2010 1:17 pm
Posts: 578
Location: Monroeville, Alabama
Post Re: Uncle J 17x54 review

_________________
Uncle J 17x54
GTR 35


Sat Feb 11, 2012 11:15 pm
Profile
MMT Addict
User avatar

Joined: Sat Oct 30, 2010 1:17 pm
Posts: 578
Location: Monroeville, Alabama
Post Re: Uncle J 17x54 review

_________________
Uncle J 17x54
GTR 35


Sat Feb 11, 2012 11:21 pm
Profile
MMT Elite Member

Joined: Wed Mar 03, 2010 7:00 pm
Posts: 6060
Location: Choudrant, La
Post Re: Uncle J 17x54 review
Is there storage or foam in the deck?

_________________
CSM Custom 18x42 Battleship with a 36 PD beating you to the hole
My Rig (Old Motor) viewtopic.php?f=5&t=45193

(New Motor) viewtopic.php?f=5&t=54733

Stumps Fear Me


Sun Feb 12, 2012 3:21 pm
Profile
MMT Addict
User avatar

Joined: Sat Oct 30, 2010 1:17 pm
Posts: 578
Location: Monroeville, Alabama
Post Re: Uncle J 17x54 review

_________________
Uncle J 17x54
GTR 35


Sun Feb 12, 2012 7:14 pm
Profile
MMT Pro Member
User avatar

Joined: Wed Aug 03, 2011 7:33 am
Posts: 85
Location: Hallsville, Tx
Post Re: Uncle J 17x54 review
I'm thinkin about puttin a carb And intake on motor. I have a 35 Gtr with an exhaust on a 18 48 gtb. Carb and intake would complete my stage one is it worth the money? Will the speeds pick up that much?

_________________
35 hp marshmellow gtr sprintin on a hunt deck chasin a 1846 gtb.


Fri Mar 02, 2012 10:31 pm
Profile
MMT Addict
User avatar

Joined: Sat Oct 30, 2010 1:17 pm
Posts: 578
Location: Monroeville, Alabama
Post Re: Uncle J 17x54 review
I am not sure what all Calens stage 1 consists of but it's worth it to me. You will pick up a some speed but your load carry is what it really helps with. I have been thinking about putting on a mikuni carb kit and that will probably be the last thing I do to mine.

_________________
Uncle J 17x54
GTR 35


Sat Mar 03, 2012 5:45 am
Profile
MMT Sponsor

Joined: Fri Jul 24, 2009 7:26 am
Posts: 10388
Location: S-Ville, LA
Post Uncle J 17x54 review
Jetted Carb
Exhaust
Cam
Valve and head work
Intake


Sat Mar 03, 2012 6:23 am
Profile
MMT Addict
User avatar

Joined: Sat Oct 30, 2010 1:17 pm
Posts: 578
Location: Monroeville, Alabama
Post Re: Uncle J 17x54 review

_________________
Uncle J 17x54
GTR 35


Sat Mar 03, 2012 11:35 am
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 14 posts ] 

Who is online

Users browsing this forum: No registered users and 76 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: