MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
Moded out mudbuddy http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=5&t=27158 |
Page 1 of 1 |
Author: | mucknaked [ Mon Feb 27, 2012 7:51 am ] |
Post subject: | Moded out mudbuddy |
You get a 6month warr with a mod motor. How long does the motors really last? You run it hard, see what you can go thru. how long before you need repairs? Please give me some input, THANK YOU |
Author: | Migrator [ Mon Feb 27, 2012 8:35 am ] |
Post subject: | Re: Moded out mudbuddy |
I ran a 45 mag and added a mikuni and I have replaced a case gasket at 60 - 70 hours. Just change the oil and filter and recently changed plugs at 120 hours. I have been pleased. |
Author: | GSUrugger [ Mon Feb 27, 2012 1:13 pm ] |
Post subject: | Re: Moded out mudbuddy |
original was a 4000 (single 42mm HSR), at about 120 hours i threw a rod (rev limiter was GONE, and prop was worn). Got about 50 hours on new exhaust, rockers, rods, and head work and am pleased. small issue this weekend but was not due to the mods failing. |
Author: | mucknaked [ Mon Feb 27, 2012 1:45 pm ] |
Post subject: | Re: Moded out mudbuddy |
What speeds did you get with the 45mag? |
Author: | mizzippi jb [ Mon Feb 27, 2012 6:02 pm ] |
Post subject: | Re: Moded out mudbuddy |
Author: | Team Camo [ Tue Feb 28, 2012 10:32 am ] |
Post subject: | Re: Moded out mudbuddy |
Gsu, push rod, or connecting rod on piston? Any motor can throw a push rod if not maintained properly. Migrator has a 1650 Gator Trax with hunt deck & a 3xl driver & he ran like 27 I think. Runs 29 now. Sent by carrier pigeon. |
Author: | GSUrugger [ Tue Feb 28, 2012 10:42 am ] |
Post subject: | Re: Moded out mudbuddy |
Author: | Bubby83 [ Tue Feb 28, 2012 2:59 pm ] |
Post subject: | Re: Moded out mudbuddy |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |