| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| 1644 GT/35 Mud Buddy Hyper http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=5&t=3795 |
Page 1 of 1 |
| Author: | bigdtex [ Sat Aug 08, 2009 4:27 pm ] |
| Post subject: | 1644 GT/35 Mud Buddy Hyper |
After wrestling with my LT and even modding it to make it faster, I believe I have got the easiest rig in the world. Don't get me wrong, I loved my LT and the mods made it so much better, but when you turn 45 years old you start wanting things to be a bit easier. I can cruise at 26 in the wind and 27 in the creek with lesser wind, this thing corners like a race car and can turn on a dime. In the lilly pads I was almost hitting 30. I wasn't hauling a big load, just me (225) the dog (70) full tank of fuel, battery and a cooler full of beverages, but it was like going from driving a tank to being in a formula 1 race car. I know everybody bags on MB on here but I been on this site a while and just had to post this up. |
|
| Author: | Gatorpoint [ Sat Aug 08, 2009 6:03 pm ] |
| Post subject: | Re: 1644 GT/35 Mud Buddy Hyper |
As long as you are happy thats all that matters. Congrats on the rig! You know I am gonna have to talk some smack this season! |
|
| Author: | bigdtex [ Sat Aug 08, 2009 7:04 pm ] |
| Post subject: | Re: 1644 GT/35 Mud Buddy Hyper |
As long as we're shooting duckbirds you can talk all the trash you want. |
|
| Author: | quackconsumer [ Sat Aug 08, 2009 7:22 pm ] |
| Post subject: | Re: 1644 GT/35 Mud Buddy Hyper |
Glad your happy wit it. |
|
| Author: | forever draggin [ Sun Aug 09, 2009 12:34 pm ] |
| Post subject: | Re: 1644 GT/35 Mud Buddy Hyper |
congrats man |
|
| Author: | Snowbird [ Mon Aug 10, 2009 12:37 am ] |
| Post subject: | Re: 1644 GT/35 Mud Buddy Hyper |
hey tex, how skinny of water have you been able to run that setup in? hard or soft bottom? i'm looking to pick up a similar setup. mb 35 mini on a 15-16' x 44-46" wide boat. i'm still undecided on the motor size and the length/width of the boat. if i go long and narrow or short and fat. also, did you end up with the 18 or 21" sides? |
|
| Author: | bigdtex [ Mon Aug 10, 2009 1:19 pm ] |
| Post subject: | Re: 1648 GT/35 Mud Buddy Hyper |
Thought the boat was a 1644 but after measuring the boat it seems to be a 1648 with 21" sides. Seemed to be doing just fine in some very skinny water, the bottom at Cedar Creek is pretty hard mud. I haven't had it in any soft mud, there's not much around here. |
|
| Author: | rebbeer [ Sun Aug 16, 2009 8:10 pm ] |
| Post subject: | Re: 1644 GT/35 Mud Buddy Hyper |
Sounds like a nice set up. I hope you have a good season with the duck birds. I'm sure this rig will get you to and from where you want to go!!! |
|
| Author: | Joe Guide [ Sat Nov 07, 2009 6:49 pm ] |
| Post subject: | Re: 1644 GT/35 Mud Buddy Hyper |
Could you post some photos of your rig. Sounds like a sweet ride. I run the GDSD 16X60 with a stock GDSD 35. Here on the big bays of coastal NC we need larger boats, but the 16x60 is mighty sweet in the marsh and mud....but seriously thinking about going to a larger boat next year, and looking at different boats. |
|
| Author: | bigdtex [ Mon Nov 09, 2009 2:05 pm ] |
| Post subject: | Re: 1644 GT/35 Mud Buddy Hyper |
Don't have this rig anymore sold it and went with a smaller, creek running rig. |
|
| Author: | willtodo [ Sun Dec 06, 2009 12:45 pm ] |
| Post subject: | Re: 1644 GT/35 Mud Buddy Hyper |
What did you step down too, those 35 mb are not much on tight water |
|
| Author: | bigdtex [ Mon Dec 07, 2009 10:30 am ] |
| Post subject: | Re: 1644 GT/35 Mud Buddy Hyper |
1644 Go-Devil w/23 Mud Buddy Mini Lite and EVT Stage 1 w/ Gecker Exhaust. |
|
| Author: | Mud Slinger [ Mon Dec 07, 2009 8:37 pm ] |
| Post subject: | Re: 1644 GT/35 Mud Buddy Hyper |
well give us some details in a new thread please thanks |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|