It is currently Mon Jun 17, 2019 1:13 am




Reply to topic  [ 49 posts ]  Go to page 1, 2  Next
 18x42 CSM Custom 24hp LT 
Author Message
MMT Elite Member

Joined: Wed Mar 03, 2010 7:00 pm
Posts: 6059
Location: Choudrant, La
Post 18x42 CSM Custom 24hp LT
MM Brand: Mud Buddy
Horsepower: 24 Hp
Boat Brand: CSM Custom
Boat Size: 18x42 3/16 bottom, 21" tall 1/8 sides, (6) 1x2" longitudinal braces, (4) 2x2" cross braces, 6' rake
Boat Layout: Wide open, pointed bow, dual drain plugs, 30" deck

Speeds | Shallow Water: N/A
Speeds | Deep Water: 16.5-17 mph
Total Boat Load With Gear Etc: Me (130) Friend (180) Gas, Battery, Stuff for a blind (tin, tar paper, roll of wire mesh, ect. 100ish lbs) 25lbs of tools, and cooler with drinks


Speeds | Shallow Water: N/A
Speeds | Deep Water: 18 consistent
Total Boat Load With Gear Etc: Me and Friend minus the 100 lbs of blind material

Speeds | Shallow Water: N/A
Speeds | Deep Water: 20 consistent
Total Boat Load With Gear Etc: Just me and gear in the boat

Conditions Tested In: Pure boat hell

Comments: Really like the boat so far. I told Brandon what I had in mind and he got it done, kept me updated with plenty of pics and I swung by the shop to be there if he had any question on what I wanted. It ran really well today on the lake and I hit more than my share of stumps lookin for the ghost teal we must have and I think its gunna hold up, pretty solid boat. The slick bottom is a life saver in the stumps and grass.

_________________
CSM Custom 18x42 Battleship with a 36 PD beating you to the hole
My Rig (Old Motor) viewtopic.php?f=5&t=45193

(New Motor) viewtopic.php?f=5&t=54733

Stumps Fear Me


Sat Sep 07, 2013 7:54 pm
Profile
MMT Super Elite Member

Joined: Fri Dec 18, 2009 8:10 pm
Posts: 16776
Location: Rowlett, TX
Post Re: 18x42 CSM Custom 24hp LT
Congrats Woodrow!


Sat Sep 07, 2013 7:59 pm
Profile
MMT Elite Member

Joined: Wed Mar 03, 2010 7:00 pm
Posts: 6059
Location: Choudrant, La
Post Re: 18x42 CSM Custom 24hp LT
Attachment:
ImageUploadedByTapatalk1378605641.973733.jpg

Attachment:
ImageUploadedByTapatalk1378605672.696469.jpg

Attachment:
ImageUploadedByTapatalk1378605698.112998.jpg


You do not have the required permissions to view the files attached to this post.

_________________
CSM Custom 18x42 Battleship with a 36 PD beating you to the hole
My Rig (Old Motor) viewtopic.php?f=5&t=45193

(New Motor) viewtopic.php?f=5&t=54733

Stumps Fear Me


Sat Sep 07, 2013 8:02 pm
Profile
MMT Elite Member

Joined: Wed Mar 03, 2010 7:00 pm
Posts: 6059
Location: Choudrant, La
Post Re: 18x42 CSM Custom 24hp LT
Attachment:
ImageUploadedByTapatalk1378605774.091523.jpg

Attachment:
ImageUploadedByTapatalk1378605802.147038.jpg

Attachment:
ImageUploadedByTapatalk1378605824.428181.jpg


You do not have the required permissions to view the files attached to this post.

_________________
CSM Custom 18x42 Battleship with a 36 PD beating you to the hole
My Rig (Old Motor) viewtopic.php?f=5&t=45193

(New Motor) viewtopic.php?f=5&t=54733

Stumps Fear Me


Sat Sep 07, 2013 8:04 pm
Profile
MMT Elite Member

Joined: Wed Mar 03, 2010 7:00 pm
Posts: 6059
Location: Choudrant, La
Post Re: 18x42 CSM Custom 24hp LT
Attachment:
ImageUploadedByTapatalk1378605882.828875.jpg

Attachment:
ImageUploadedByTapatalk1378605916.097078.jpg
Attachment:
ImageUploadedByTapatalk1378605945.845358.jpg


You do not have the required permissions to view the files attached to this post.

_________________
CSM Custom 18x42 Battleship with a 36 PD beating you to the hole
My Rig (Old Motor) viewtopic.php?f=5&t=45193

(New Motor) viewtopic.php?f=5&t=54733

Stumps Fear Me


Sat Sep 07, 2013 8:05 pm
Profile
MMT Elite Member

Joined: Wed Mar 03, 2010 7:00 pm
Posts: 6059
Location: Choudrant, La
Post Re: 18x42 CSM Custom 24hp LT





_________________
CSM Custom 18x42 Battleship with a 36 PD beating you to the hole
My Rig (Old Motor) viewtopic.php?f=5&t=45193

(New Motor) viewtopic.php?f=5&t=54733

Stumps Fear Me


Sat Sep 07, 2013 8:28 pm
Profile
MMT 1000 Club
User avatar

Joined: Mon Sep 02, 2013 10:24 pm
Posts: 2624
Location: ponchatoula, la
Post Re: 18x42 CSM Custom 24hp LT
finally a real review!!!!!!!!!!!!!! congrats on the new boat!!

_________________
STAGE 2 GTR PUSHING A SHALLOW WATER CUSTOMS 1746
formerly known as pintaildrake09.
CJB wrote:
Tits r stfu

barnes_53 wrote:
Looks like I'll start saving for a modded GTR.


Sat Sep 07, 2013 8:33 pm
Profile
MMT Elite Member
User avatar

Joined: Tue Sep 13, 2011 11:46 am
Posts: 5216
Location: Across the Bayou, LA
Post Re: 18x42 CSM Custom 24hp LT
Nothing wrong with that man. It looks like a skiff/bateau hybrid. Good job woodie. Moving on up!

_________________
35 GTR - 1754 Extreme

1854 Uncle J - 'Stage 2' 36 Pro-Drive


Sat Sep 07, 2013 9:33 pm
Profile
MMT Elite Member
User avatar

Joined: Tue Jan 13, 2009 7:10 pm
Posts: 6664
Location: in the marsh with a boat load full of dead hookers
Post Re: 18x42 CSM Custom 24hp LT
CJB wrote:
Nothing wrong with that man. It looks like a skiff/bateau hybrid. Good job woodie. Moving on up!


:D what?


Sat Sep 07, 2013 9:43 pm
Profile
MMT Elite Member
User avatar

Joined: Fri Oct 07, 2011 12:58 am
Posts: 5557
Post Re: 18x42 CSM Custom 24hp LT
Looks awesome, congrats! Whats you plans on motor? Just gonna stick with the longtail or upgrading to a SD?

_________________
1850 Uncle J
Delta Performance level 4 GTR


Sat Sep 07, 2013 11:14 pm
Profile
MMT Elite Member

Joined: Wed Mar 03, 2010 7:00 pm
Posts: 6059
Location: Choudrant, La
Post Re: 18x42 CSM Custom 24hp LT
CJB wrote:
Nothing wrong with that man. It looks like a skiff/bateau hybrid. Good job woodie. Moving on up!


I really like how the bow points up with the rake on this boat, I jump a lot of beaver dams and it will be a smooth jump. I run tall lillies and it helps keep them out of the boat. I wasn't really shooting for a skiff hybrid, but the bow pulls to 24" before it goes to the 1' long point, so it's pretty sharp.

_________________
CSM Custom 18x42 Battleship with a 36 PD beating you to the hole
My Rig (Old Motor) viewtopic.php?f=5&t=45193

(New Motor) viewtopic.php?f=5&t=54733

Stumps Fear Me


Sat Sep 07, 2013 11:19 pm
Profile
MMT Elite Member

Joined: Wed Mar 03, 2010 7:00 pm
Posts: 6059
Location: Choudrant, La
Post Re: 18x42 CSM Custom 24hp LT
brasso wrote:
Looks awesome, congrats! Whats you plans on motor? Just gonna stick with the longtail or upgrading to a SD?

I prefer a LT for where I run, I may do some mods to the Honda or buy a 35 lt after season, but I'm pretty happy with how it runs

_________________
CSM Custom 18x42 Battleship with a 36 PD beating you to the hole
My Rig (Old Motor) viewtopic.php?f=5&t=45193

(New Motor) viewtopic.php?f=5&t=54733

Stumps Fear Me


Sat Sep 07, 2013 11:29 pm
Profile
MMT Elite Member
User avatar

Joined: Fri Oct 07, 2011 12:58 am
Posts: 5557
Post Re: 18x42 CSM Custom 24hp LT
Good deal, nothing wrong with a longtail ive hunted with them for years and have found they shine in a lot of places a SD wouldn't. A modded 35 LT on that boat like Bcoonass used to have would be insane!

_________________
1850 Uncle J
Delta Performance level 4 GTR


Sat Sep 07, 2013 11:33 pm
Profile
MMT Pro Member
User avatar

Joined: Mon Jan 24, 2011 5:00 pm
Posts: 233
Location: Milledgeville, GA
Post Re: 18x42 CSM Custom 24hp LT
Have you painted it Yet?

_________________
1846 GTB with GTR 35


Thu Oct 10, 2013 6:10 pm
Profile
MMT Elite Member

Joined: Wed Mar 03, 2010 7:00 pm
Posts: 6059
Location: Choudrant, La
Post Re: 18x42 CSM Custom 24hp LT
No, I just got the paint yesterday and now I'm waiting on the right day to paint it.
It's just going to be a plain Jane drab green with gator glide on the bottom

_________________
CSM Custom 18x42 Battleship with a 36 PD beating you to the hole
My Rig (Old Motor) viewtopic.php?f=5&t=45193

(New Motor) viewtopic.php?f=5&t=54733

Stumps Fear Me


Thu Oct 10, 2013 6:50 pm
Profile
MMT 1000 Club
User avatar

Joined: Wed Jan 25, 2012 12:03 pm
Posts: 1763
Location: Prairieville, LA
Post Re: 18x42 CSM Custom 24hp LT
I've seen a few boats on here now with the braces exposed how do you like it that way and do you plan on putting in a floor in the future?

_________________
18X54 CC & 35 GTR w/ Hoyts Stage 1


Thu Oct 10, 2013 7:14 pm
Profile
MMT Elite Member

Joined: Wed Mar 03, 2010 7:00 pm
Posts: 6059
Location: Choudrant, La
Post Re: 18x42 CSM Custom 24hp LT
I don't really mind it, its alot easier to clean but it is hard on bare feet.

I have a couple of small sheets of plywood I throw down sometimes, and I have one to stand and drive on.

_________________
CSM Custom 18x42 Battleship with a 36 PD beating you to the hole
My Rig (Old Motor) viewtopic.php?f=5&t=45193

(New Motor) viewtopic.php?f=5&t=54733

Stumps Fear Me


Thu Oct 10, 2013 7:43 pm
Profile
MMT 1000 Club
User avatar

Joined: Wed Jan 14, 2009 8:18 pm
Posts: 4897
Location: Lake Jackson, TX
Post Re: 18x42 CSM Custom 24hp LT
Gets a little tricky with alcohol and tough on the back when things get bad and you have to sleep in your boat

_________________
37 PD EFI FPR 18x48 Tiller
SOLD -- 36 PD EFI FPR 18x48 Stick Steer
SOLD -- 27 PD FPR 16x36 Skiff


Thu Oct 10, 2013 8:43 pm
Profile
MMT Elite Member

Joined: Wed Mar 03, 2010 7:00 pm
Posts: 6059
Location: Choudrant, La
Post Re: 18x42 CSM Custom 24hp LT
Got paint and gatorglide put on this weekend, was gunna go with plain green but we had stencils and paint in the shop... Too much to stand.
Attachment:
ImageUploadedByTapatalk1383527816.045067.jpg

Attachment:
ImageUploadedByTapatalk1383527842.953822.jpg

Attachment:
ImageUploadedByTapatalk1383527910.738225.jpg


You do not have the required permissions to view the files attached to this post.

_________________
CSM Custom 18x42 Battleship with a 36 PD beating you to the hole
My Rig (Old Motor) viewtopic.php?f=5&t=45193

(New Motor) viewtopic.php?f=5&t=54733

Stumps Fear Me


Sun Nov 03, 2013 7:18 pm
Profile
MMT Elite Member

Joined: Wed Mar 03, 2010 7:00 pm
Posts: 6059
Location: Choudrant, La
Post Re: 18x42 CSM Custom 24hp LT
More
Attachment:
ImageUploadedByTapatalk1383528020.445994.jpg

Attachment:
ImageUploadedByTapatalk1383528042.536943.jpg

Attachment:
ImageUploadedByTapatalk1383528064.783589.jpg


You do not have the required permissions to view the files attached to this post.

_________________
CSM Custom 18x42 Battleship with a 36 PD beating you to the hole
My Rig (Old Motor) viewtopic.php?f=5&t=45193

(New Motor) viewtopic.php?f=5&t=54733

Stumps Fear Me


Sun Nov 03, 2013 7:21 pm
Profile
MMT Elite Member
User avatar

Joined: Mon Aug 02, 2010 8:39 pm
Posts: 6971
Location: West Monroe, LA
Post Re: 18x42 CSM Custom 24hp LT
Looks good!!


Sent from my beeper.

_________________
CSM Custom 2054 CC w/ 35 GTR in the works!
CSM Custom 1242 w/ 12hp sd going about 5011!

brasso wrote:
Dean your a creepy old bastard


Sun Nov 03, 2013 7:42 pm
Profile
MMT 1000 Club

Joined: Sat Jun 16, 2012 9:43 am
Posts: 1504
Location: Watoola, Alabama
Post Re: 18x42 CSM Custom 24hp LT
congrats! thats a bad ass looking boat


Mon Nov 04, 2013 12:08 pm
Profile
MMT 1000 Club
User avatar

Joined: Sat May 28, 2011 11:18 pm
Posts: 2114
Location: Slinger, WI
Post Re: 18x42 CSM Custom 24hp LT
Looks excellent!

_________________
Every day I'm paddlin'
1848 Gatortail boat and 37 efi GTR.


Mon Nov 04, 2013 12:22 pm
Profile
MMT 1000 Club
User avatar

Joined: Sun Feb 03, 2013 1:26 pm
Posts: 3084
Location: Down South
Post Re: 18x42 CSM Custom 24hp LT
Looks nice! Post a pic of the front

_________________
1852 Dfou custom 35gtr


Mon Nov 04, 2013 6:50 pm
Profile
MMT Elite Member

Joined: Wed Mar 03, 2010 7:00 pm
Posts: 6059
Location: Choudrant, La
Post Re: 18x42 CSM Custom 24hp LT
Thanks, really happy with it.
The boat is pretty damn solid, I haven't put a ton of hours on it yet but Ive ran it about 20 hours and every second of it it has been cut no slack. Not even a good ripple in the bottom. That narrow front and pointed bow is bad ass! I am gunna play bumper boats in the timber all season, no more smackin trees and coming to a stop.


And I am now a firm believer in Gatorglide, that stuff is slicker than owl shit!

_________________
CSM Custom 18x42 Battleship with a 36 PD beating you to the hole
My Rig (Old Motor) viewtopic.php?f=5&t=45193

(New Motor) viewtopic.php?f=5&t=54733

Stumps Fear Me


Mon Nov 04, 2013 6:55 pm
Profile
MMT Elite Member

Joined: Wed Mar 03, 2010 7:00 pm
Posts: 6059
Location: Choudrant, La
Post Re: 18x42 CSM Custom 24hp LT
doubleBanded wrote:
Looks nice! Post a pic of the front



What kinda angle you wanna see? I think i got them all posted.

_________________
CSM Custom 18x42 Battleship with a 36 PD beating you to the hole
My Rig (Old Motor) viewtopic.php?f=5&t=45193

(New Motor) viewtopic.php?f=5&t=54733

Stumps Fear Me


Mon Nov 04, 2013 6:57 pm
Profile
MMT Elite Member

Joined: Wed Mar 11, 2009 12:45 pm
Posts: 9869
Post Re: 18x42 CSM Custom 24hp LT
Who did the painting? Looks really good.


Mon Nov 04, 2013 8:51 pm
Profile
MMT Elite Member

Joined: Wed Mar 03, 2010 7:00 pm
Posts: 6059
Location: Choudrant, La
Post Re: 18x42 CSM Custom 24hp LT
Me and my cousin, I dunno what brand stencil that is.

I like it, Its a good mix of dark and light. We have camo'ed all kinds of shit and just change it up and learn a lil at the time. We pretty much painted the whole thing in just a few hours.

_________________
CSM Custom 18x42 Battleship with a 36 PD beating you to the hole
My Rig (Old Motor) viewtopic.php?f=5&t=45193

(New Motor) viewtopic.php?f=5&t=54733

Stumps Fear Me


Mon Nov 04, 2013 9:04 pm
Profile
MMT Elite Member
User avatar

Joined: Mon Aug 02, 2010 8:39 pm
Posts: 6971
Location: West Monroe, LA
Post Re: 18x42 CSM Custom 24hp LT
Ran it since you put the gg on it? Any speed gain or any difference in running?


Sent from my beeper.

_________________
CSM Custom 2054 CC w/ 35 GTR in the works!
CSM Custom 1242 w/ 12hp sd going about 5011!

brasso wrote:
Dean your a creepy old bastard


Thu Nov 07, 2013 9:22 pm
Profile
MMT Elite Member

Joined: Wed Mar 03, 2010 7:00 pm
Posts: 6059
Location: Choudrant, La
Post Re: 18x42 CSM Custom 24hp LT
Goin down to Turkey Creek/Boeuf tomorrow after work an gunna run it.

I don't really expect any speed changes but its gotta be easier to slide around on mud and thick grass. I'm sure it'll get dry docked at least once

_________________
CSM Custom 18x42 Battleship with a 36 PD beating you to the hole
My Rig (Old Motor) viewtopic.php?f=5&t=45193

(New Motor) viewtopic.php?f=5&t=54733

Stumps Fear Me


Thu Nov 07, 2013 10:39 pm
Profile
MMT 1000 Club
User avatar

Joined: Wed Oct 27, 2010 8:30 am
Posts: 3406
Location: Prairieville
Post Re: 18x42 CSM Custom 24hp LT
Woodiebuster wrote:
Goin down to Turkey Creek/Boeuf tomorrow after work an gunna run it.

I don't really expect any speed changes but its gotta be easier to slide around on mud and thick grass. I'm sure it'll get dry docked at least once
beautiful country up in those woods. I could see myself getting a camp up there.

_________________
17*38 Klibert 23GDLT
I toast to staying positive and testing negative!


Thu Nov 07, 2013 11:46 pm
Profile
MMT Elite Member
User avatar

Joined: Mon Aug 02, 2010 8:39 pm
Posts: 6971
Location: West Monroe, LA
Post Re: 18x42 CSM Custom 24hp LT
Woodiebuster wrote:
Goin down to Turkey Creek/Boeuf tomorrow after work an gunna run it.

I don't really expect any speed changes but its gotta be easier to slide around on mud and thick grass. I'm sure it'll get dry docked at least once


If the river isn't high there's plenty of mud on it.


Sent from my beeper.

_________________
CSM Custom 2054 CC w/ 35 GTR in the works!
CSM Custom 1242 w/ 12hp sd going about 5011!

brasso wrote:
Dean your a creepy old bastard


Fri Nov 08, 2013 7:15 am
Profile
MMT Elite Member

Joined: Wed Mar 11, 2009 12:45 pm
Posts: 9869
Post Re: 18x42 CSM Custom 24hp LT
Excellent job on the paint. Looks professional.

What stencil?


Fri Nov 08, 2013 7:30 am
Profile
MMT Elite Member
User avatar

Joined: Mon Aug 02, 2010 8:39 pm
Posts: 6971
Location: West Monroe, LA
Post Re: 18x42 CSM Custom 24hp LT
da go get'er wrote:
Woodiebuster wrote:
Goin down to Turkey Creek/Boeuf tomorrow after work an gunna run it.

I don't really expect any speed changes but its gotta be easier to slide around on mud and thick grass. I'm sure it'll get dry docked at least once
beautiful country up in those woods. I could see myself getting a camp up there.


Too many people there already. We don't need anyone else!!


Sent from my beeper.

_________________
CSM Custom 2054 CC w/ 35 GTR in the works!
CSM Custom 1242 w/ 12hp sd going about 5011!

brasso wrote:
Dean your a creepy old bastard


Fri Nov 08, 2013 8:43 am
Profile
MMT 1000 Club
User avatar

Joined: Wed Oct 27, 2010 8:30 am
Posts: 3406
Location: Prairieville
Post 18x42 CSM Custom 24hp LT
North LA Hunter wrote:
da go get'er wrote:
Woodiebuster wrote:
Goin down to Turkey Creek/Boeuf tomorrow after work an gunna run it.

I don't really expect any speed changes but its gotta be easier to slide around on mud and thick grass. I'm sure it'll get dry docked at least once
beautiful country up in those woods. I could see myself getting a camp up there.


Too many people there already. We don't need anyone else!!


Sent from my beeper.
considering the little women's grandpas has a camp there it's too late. Consider me already transplanted. Just say hi when you see the guy in white shrimp boots. :)

_________________
17*38 Klibert 23GDLT
I toast to staying positive and testing negative!


Fri Nov 08, 2013 8:56 am
Profile
MMT Elite Member
User avatar

Joined: Mon Aug 02, 2010 8:39 pm
Posts: 6971
Location: West Monroe, LA
Post Re: 18x42 CSM Custom 24hp LT
da go get'er wrote:
North LA Hunter wrote:
da go get'er wrote:
Woodiebuster wrote:
Goin down to Turkey Creek/Boeuf tomorrow after work an gunna run it.

I don't really expect any speed changes but its gotta be easier to slide around on mud and thick grass. I'm sure it'll get dry docked at least once
beautiful country up in those woods. I could see myself getting a camp up there.


Too many people there already. We don't need anyone else!!


Sent from my beeper.
considering the little women's grandpas has a camp there it's too late. Consider me already transplanted. Just say hi when you see the guy in white shrimp boots. :)


Is it on turkey creek or in the beouf area?


Sent from my beeper.

_________________
CSM Custom 2054 CC w/ 35 GTR in the works!
CSM Custom 1242 w/ 12hp sd going about 5011!

brasso wrote:
Dean your a creepy old bastard


Fri Nov 08, 2013 9:00 am
Profile
MMT 1000 Club
User avatar

Joined: Wed Oct 27, 2010 8:30 am
Posts: 3406
Location: Prairieville
Post Re: 18x42 CSM Custom 24hp LT
North LA Hunter wrote:
da go get'er wrote:
North LA Hunter wrote:
da go get'er wrote:
Woodiebuster wrote:
Goin down to Turkey Creek/Boeuf tomorrow after work an gunna run it.

I don't really expect any speed changes but its gotta be easier to slide around on mud and thick grass. I'm sure it'll get dry docked at least once
beautiful country up in those woods. I could see myself getting a camp up there.


Too many people there already. We don't need anyone else!!


Sent from my beeper.
considering the little women's grandpas has a camp there it's too late. Consider me already transplanted. Just say hi when you see the guy in white shrimp boots. :)


Is it on turkey creek or in the beouf area?


Sent from my beeper.
turkey creek. But I deer hunt boeuf as well

_________________
17*38 Klibert 23GDLT
I toast to staying positive and testing negative!


Fri Nov 08, 2013 10:37 am
Profile
MMT Elite Member

Joined: Wed Mar 03, 2010 7:00 pm
Posts: 6059
Location: Choudrant, La
Post Re: 18x42 CSM Custom 24hp LT
Just what we need, another coonass deer huntin in North La!!!!

What part of the lake is it on? We are right on the spillway

_________________
CSM Custom 18x42 Battleship with a 36 PD beating you to the hole
My Rig (Old Motor) viewtopic.php?f=5&t=45193

(New Motor) viewtopic.php?f=5&t=54733

Stumps Fear Me


Fri Nov 08, 2013 12:30 pm
Profile
MMT Elite Member

Joined: Wed Mar 03, 2010 7:00 pm
Posts: 6059
Location: Choudrant, La
Post Re: 18x42 CSM Custom 24hp LT
OwenDickeson wrote:
Excellent job on the paint. Looks professional.

What stencil?


It's got some of the new style break up in the pattern, but idk who makes it. I can check next time I'm at my cousins shop

_________________
CSM Custom 18x42 Battleship with a 36 PD beating you to the hole
My Rig (Old Motor) viewtopic.php?f=5&t=45193

(New Motor) viewtopic.php?f=5&t=54733

Stumps Fear Me


Fri Nov 08, 2013 12:31 pm
Profile
MMT 1000 Club
User avatar

Joined: Wed Oct 27, 2010 8:30 am
Posts: 3406
Location: Prairieville
Post Re: 18x42 CSM Custom 24hp LT
Woodiebuster wrote:
Just what we need, another coonass deer huntin in North La!!!!

What part of the lake is it on? We are right on the spillway
just north of the bridge on the east side. Julian king road.

_________________
17*38 Klibert 23GDLT
I toast to staying positive and testing negative!


Fri Nov 08, 2013 1:00 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 49 posts ]  Go to page 1, 2  Next

Who is online

Users browsing this forum: dgammill08 and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron