| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| 18x42 CSM Custom 24hp LT http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=5&t=45193 |
Page 1 of 2 |
| Author: | Woodiebuster [ Sat Sep 07, 2013 7:54 pm ] |
| Post subject: | 18x42 CSM Custom 24hp LT |
MM Brand: Mud Buddy Horsepower: 24 Hp Boat Brand: CSM Custom Boat Size: 18x42 3/16 bottom, 21" tall 1/8 sides, (6) 1x2" longitudinal braces, (4) 2x2" cross braces, 6' rake Boat Layout: Wide open, pointed bow, dual drain plugs, 30" deck Speeds | Shallow Water: N/A Speeds | Deep Water: 16.5-17 mph Total Boat Load With Gear Etc: Me (130) Friend (180) Gas, Battery, Stuff for a blind (tin, tar paper, roll of wire mesh, ect. 100ish lbs) 25lbs of tools, and cooler with drinks Speeds | Shallow Water: N/A Speeds | Deep Water: 18 consistent Total Boat Load With Gear Etc: Me and Friend minus the 100 lbs of blind material Speeds | Shallow Water: N/A Speeds | Deep Water: 20 consistent Total Boat Load With Gear Etc: Just me and gear in the boat Conditions Tested In: Pure boat hell Comments: Really like the boat so far. I told Brandon what I had in mind and he got it done, kept me updated with plenty of pics and I swung by the shop to be there if he had any question on what I wanted. It ran really well today on the lake and I hit more than my share of stumps lookin for the ghost teal we must have and I think its gunna hold up, pretty solid boat. The slick bottom is a life saver in the stumps and grass. |
|
| Author: | cb5331 [ Sat Sep 07, 2013 7:59 pm ] |
| Post subject: | Re: 18x42 CSM Custom 24hp LT |
Congrats Woodrow! |
|
| Author: | Woodiebuster [ Sat Sep 07, 2013 8:02 pm ] |
| Post subject: | Re: 18x42 CSM Custom 24hp LT |
ImageUploadedByTapatalk1378605641.973733.jpg ImageUploadedByTapatalk1378605672.696469.jpg ImageUploadedByTapatalk1378605698.112998.jpg |
|
| Author: | Woodiebuster [ Sat Sep 07, 2013 8:04 pm ] |
| Post subject: | Re: 18x42 CSM Custom 24hp LT |
ImageUploadedByTapatalk1378605774.091523.jpg ImageUploadedByTapatalk1378605802.147038.jpg ImageUploadedByTapatalk1378605824.428181.jpg |
|
| Author: | Woodiebuster [ Sat Sep 07, 2013 8:05 pm ] |
| Post subject: | Re: 18x42 CSM Custom 24hp LT |
ImageUploadedByTapatalk1378605882.828875.jpg ImageUploadedByTapatalk1378605916.097078.jpgImageUploadedByTapatalk1378605945.845358.jpg |
|
| Author: | Woodiebuster [ Sat Sep 07, 2013 8:28 pm ] |
| Post subject: | Re: 18x42 CSM Custom 24hp LT |
| Author: | diddyduck [ Sat Sep 07, 2013 8:33 pm ] |
| Post subject: | Re: 18x42 CSM Custom 24hp LT |
finally a real review!!!!!!!!!!!!!! congrats on the new boat!! |
|
| Author: | CJB [ Sat Sep 07, 2013 9:33 pm ] |
| Post subject: | Re: 18x42 CSM Custom 24hp LT |
Nothing wrong with that man. It looks like a skiff/bateau hybrid. Good job woodie. Moving on up! |
|
| Author: | forever draggin [ Sat Sep 07, 2013 9:43 pm ] |
| Post subject: | Re: 18x42 CSM Custom 24hp LT |
| Author: | brasso [ Sat Sep 07, 2013 11:14 pm ] |
| Post subject: | Re: 18x42 CSM Custom 24hp LT |
Looks awesome, congrats! Whats you plans on motor? Just gonna stick with the longtail or upgrading to a SD? |
|
| Author: | Woodiebuster [ Sat Sep 07, 2013 11:19 pm ] |
| Post subject: | Re: 18x42 CSM Custom 24hp LT |
| Author: | Woodiebuster [ Sat Sep 07, 2013 11:29 pm ] |
| Post subject: | Re: 18x42 CSM Custom 24hp LT |
| Author: | brasso [ Sat Sep 07, 2013 11:33 pm ] |
| Post subject: | Re: 18x42 CSM Custom 24hp LT |
Good deal, nothing wrong with a longtail ive hunted with them for years and have found they shine in a lot of places a SD wouldn't. A modded 35 LT on that boat like Bcoonass used to have would be insane! |
|
| Author: | DuckHunter251 [ Thu Oct 10, 2013 6:10 pm ] |
| Post subject: | Re: 18x42 CSM Custom 24hp LT |
Have you painted it Yet? |
|
| Author: | Woodiebuster [ Thu Oct 10, 2013 6:50 pm ] |
| Post subject: | Re: 18x42 CSM Custom 24hp LT |
No, I just got the paint yesterday and now I'm waiting on the right day to paint it. It's just going to be a plain Jane drab green with gator glide on the bottom |
|
| Author: | rob_E [ Thu Oct 10, 2013 7:14 pm ] |
| Post subject: | Re: 18x42 CSM Custom 24hp LT |
I've seen a few boats on here now with the braces exposed how do you like it that way and do you plan on putting in a floor in the future? |
|
| Author: | Woodiebuster [ Thu Oct 10, 2013 7:43 pm ] |
| Post subject: | Re: 18x42 CSM Custom 24hp LT |
I don't really mind it, its alot easier to clean but it is hard on bare feet. I have a couple of small sheets of plywood I throw down sometimes, and I have one to stand and drive on. |
|
| Author: | JLACOUR [ Thu Oct 10, 2013 8:43 pm ] |
| Post subject: | Re: 18x42 CSM Custom 24hp LT |
Gets a little tricky with alcohol and tough on the back when things get bad and you have to sleep in your boat |
|
| Author: | Woodiebuster [ Sun Nov 03, 2013 7:18 pm ] |
| Post subject: | Re: 18x42 CSM Custom 24hp LT |
Got paint and gatorglide put on this weekend, was gunna go with plain green but we had stencils and paint in the shop... Too much to stand. ImageUploadedByTapatalk1383527816.045067.jpg ImageUploadedByTapatalk1383527842.953822.jpg ImageUploadedByTapatalk1383527910.738225.jpg |
|
| Author: | Woodiebuster [ Sun Nov 03, 2013 7:21 pm ] |
| Post subject: | Re: 18x42 CSM Custom 24hp LT |
More ImageUploadedByTapatalk1383528020.445994.jpg ImageUploadedByTapatalk1383528042.536943.jpg ImageUploadedByTapatalk1383528064.783589.jpg |
|
| Author: | North LA Hunter [ Sun Nov 03, 2013 7:42 pm ] |
| Post subject: | Re: 18x42 CSM Custom 24hp LT |
Looks good!! Sent from my beeper. |
|
| Author: | cr244 [ Mon Nov 04, 2013 12:08 pm ] |
| Post subject: | Re: 18x42 CSM Custom 24hp LT |
congrats! thats a bad ass looking boat |
|
| Author: | Bigbuckfever [ Mon Nov 04, 2013 12:22 pm ] |
| Post subject: | Re: 18x42 CSM Custom 24hp LT |
Looks excellent! |
|
| Author: | doubleBanded [ Mon Nov 04, 2013 6:50 pm ] |
| Post subject: | Re: 18x42 CSM Custom 24hp LT |
Looks nice! Post a pic of the front |
|
| Author: | Woodiebuster [ Mon Nov 04, 2013 6:55 pm ] |
| Post subject: | Re: 18x42 CSM Custom 24hp LT |
Thanks, really happy with it. The boat is pretty damn solid, I haven't put a ton of hours on it yet but Ive ran it about 20 hours and every second of it it has been cut no slack. Not even a good ripple in the bottom. That narrow front and pointed bow is bad ass! I am gunna play bumper boats in the timber all season, no more smackin trees and coming to a stop. And I am now a firm believer in Gatorglide, that stuff is slicker than owl shit! |
|
| Author: | Woodiebuster [ Mon Nov 04, 2013 6:57 pm ] |
| Post subject: | Re: 18x42 CSM Custom 24hp LT |
| Author: | OwenDickeson [ Mon Nov 04, 2013 8:51 pm ] |
| Post subject: | Re: 18x42 CSM Custom 24hp LT |
Who did the painting? Looks really good. |
|
| Author: | Woodiebuster [ Mon Nov 04, 2013 9:04 pm ] |
| Post subject: | Re: 18x42 CSM Custom 24hp LT |
Me and my cousin, I dunno what brand stencil that is. I like it, Its a good mix of dark and light. We have camo'ed all kinds of shit and just change it up and learn a lil at the time. We pretty much painted the whole thing in just a few hours. |
|
| Author: | North LA Hunter [ Thu Nov 07, 2013 9:22 pm ] |
| Post subject: | Re: 18x42 CSM Custom 24hp LT |
Ran it since you put the gg on it? Any speed gain or any difference in running? Sent from my beeper. |
|
| Author: | Woodiebuster [ Thu Nov 07, 2013 10:39 pm ] |
| Post subject: | Re: 18x42 CSM Custom 24hp LT |
Goin down to Turkey Creek/Boeuf tomorrow after work an gunna run it. I don't really expect any speed changes but its gotta be easier to slide around on mud and thick grass. I'm sure it'll get dry docked at least once |
|
| Author: | da go get'er [ Thu Nov 07, 2013 11:46 pm ] |
| Post subject: | Re: 18x42 CSM Custom 24hp LT |
| Author: | North LA Hunter [ Fri Nov 08, 2013 7:15 am ] |
| Post subject: | Re: 18x42 CSM Custom 24hp LT |
| Author: | OwenDickeson [ Fri Nov 08, 2013 7:30 am ] |
| Post subject: | Re: 18x42 CSM Custom 24hp LT |
Excellent job on the paint. Looks professional. What stencil? |
|
| Author: | North LA Hunter [ Fri Nov 08, 2013 8:43 am ] |
| Post subject: | Re: 18x42 CSM Custom 24hp LT |
| Author: | da go get'er [ Fri Nov 08, 2013 8:56 am ] |
| Post subject: | 18x42 CSM Custom 24hp LT |
| Author: | North LA Hunter [ Fri Nov 08, 2013 9:00 am ] |
| Post subject: | Re: 18x42 CSM Custom 24hp LT |
| Author: | da go get'er [ Fri Nov 08, 2013 10:37 am ] |
| Post subject: | Re: 18x42 CSM Custom 24hp LT |
| Author: | Woodiebuster [ Fri Nov 08, 2013 12:30 pm ] |
| Post subject: | Re: 18x42 CSM Custom 24hp LT |
Just what we need, another coonass deer huntin in North La!!!! What part of the lake is it on? We are right on the spillway |
|
| Author: | Woodiebuster [ Fri Nov 08, 2013 12:31 pm ] |
| Post subject: | Re: 18x42 CSM Custom 24hp LT |
| Author: | da go get'er [ Fri Nov 08, 2013 1:00 pm ] |
| Post subject: | Re: 18x42 CSM Custom 24hp LT |
| Page 1 of 2 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|