MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
Got my 1st mudboat http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=5&t=45983 |
Page 1 of 1 |
Author: | Bamaboy2223 [ Wed Oct 02, 2013 12:19 pm ] |
Post subject: | Got my 1st mudboat |
Been wanting one for a few years. Bought one from a guy I found online. 1448 weldbuilt flatbottom with a 23 gator tail. Don't know much about em but it's got a cam, mikuni carb and bps exhaust. Haven't got to take it out yet but it sounds like a Harley |
Author: | rob_E [ Wed Oct 02, 2013 1:34 pm ] |
Post subject: | Re: Got my 1st mudboat |
congrats buddy now get out there and drive it like you stole it. |
Author: | Westi [ Wed Oct 02, 2013 1:45 pm ] |
Post subject: | Re: Got my 1st mudboat |
Be sure to post a review in the review section after taking it out. |
Author: | Bamaboy2223 [ Wed Oct 02, 2013 4:46 pm ] |
Post subject: | Re: Got my 1st mudboat |
This is the review section you stupid Texan |
Author: | bayouboy [ Wed Oct 02, 2013 4:55 pm ] |
Post subject: | Re: Got my 1st mudboat |
Congrats! Nice first motor!! |
Author: | smash [ Wed Oct 02, 2013 5:38 pm ] |
Post subject: | Re: Got my 1st mudboat |
Author: | North LA Hunter [ Wed Oct 02, 2013 5:48 pm ] |
Post subject: | Re: Got my 1st mudboat |
Author: | Trousertrout [ Wed Oct 02, 2013 5:54 pm ] |
Post subject: | Re: Got my 1st mudboat |
Author: | Bamaboy2223 [ Wed Oct 02, 2013 6:02 pm ] |
Post subject: | Re: Got my 1st mudboat |
Author: | North LA Hunter [ Wed Oct 02, 2013 6:07 pm ] |
Post subject: | Re: Got my 1st mudboat |
Where you live in bama? Greenbow? If you would take a second and look tony b put up a layout for all you boat and motor info. All you have to do is copy and paste them enter your data. Sent from my beeper. |
Author: | Bamaboy2223 [ Wed Oct 02, 2013 6:13 pm ] |
Post subject: | Re: Got my 1st mudboat |
Author: | North LA Hunter [ Wed Oct 02, 2013 6:19 pm ] |
Post subject: | Re: Got my 1st mudboat |
Author: | Bamaboy2223 [ Wed Oct 02, 2013 6:24 pm ] |
Post subject: | Re: Got my 1st mudboat |
Author: | diddyduck [ Wed Oct 02, 2013 6:32 pm ] |
Post subject: | Re: Got my 1st mudboat |
Author: | 625browning [ Wed Oct 02, 2013 7:19 pm ] |
Post subject: | Re: Got my 1st mudboat |
Where will you be running it at? I will be on the causeway this week on the Spanish fort side |
Author: | Bamaboy2223 [ Wed Oct 02, 2013 7:44 pm ] |
Post subject: | Re: Got my 1st mudboat |
Author: | Westi [ Thu Oct 03, 2013 5:27 am ] |
Post subject: | Re: Got my 1st mudboat |
Author: | dillakilla12 [ Thu Oct 03, 2013 8:34 am ] |
Post subject: | Re: Got my 1st mudboat |
No pix? True dat!! |
Author: | Bamaboy2223 [ Thu Oct 03, 2013 8:17 pm ] |
Post subject: | Re: Got my 1st mudboat |
idk how to do the photos |
Author: | Bamaboy2223 [ Thu Oct 03, 2013 8:21 pm ] |
Post subject: | Re: Got my 1st mudboat |
Here it is |
Author: | krogers [ Fri Oct 04, 2013 5:24 am ] |
Post subject: | Re: Got my 1st mudboat |
Hell yeah boi, little man is already liking it. Congrats bud. |
Author: | Curltail [ Fri Oct 04, 2013 8:56 am ] |
Post subject: | Re: Got my 1st mudboat |
Break out the crisco...this guy is going to get fried.....What a way to introduce themselves. He should fit right in. |
Author: | MALLARDSX2 [ Fri Oct 04, 2013 9:28 am ] |
Post subject: | Re: Got my 1st mudboat |
HAHA I LOVE IT!! |
Author: | Will [ Fri Oct 04, 2013 10:12 am ] |
Post subject: | Re: Got my 1st mudboat |
Whats up with the open end pods? |
Author: | Bamaboy2223 [ Fri Oct 04, 2013 10:37 am ] |
Post subject: | Re: Got my 1st mudboat |
The guy put some pods on it and said it slowed the boat down some, so he cut them off and left enough to weld em back on if whoever got the boat wanted then on. I got the pods and the factory parts carb, cam and exhaust. And also to the stupid ass Texan, let me get the last word here and shut you up....your right not much gets by us bama boys, check out the football team for reference. AND this is a boat and MOTOR review section. Thank everybody for the props on my new rig, gonna get it in the water bright and early for last weekend of Canada geese til november. |
Author: | North LA Hunter [ Fri Oct 04, 2013 10:40 am ] |
Post subject: | Re: Got my 1st mudboat |
Football is gay. Sent from my beeper. |
Author: | Will [ Fri Oct 04, 2013 10:54 am ] |
Post subject: | Re: Got my 1st mudboat |
So far you have failed at giving any kind of a review. |
Author: | Westi [ Fri Oct 04, 2013 11:38 am ] |
Post subject: | Re: Got my 1st mudboat |
Author: | North LA Hunter [ Fri Oct 04, 2013 12:05 pm ] |
Post subject: | Re: Got my 1st mudboat |
Greenbow AlaBAMA!!!!!!!!!!!! |
Author: | Will [ Fri Oct 04, 2013 12:10 pm ] |
Post subject: | Re: Got my 1st mudboat |
Here's an example of what a review is. viewtopic.php?f=5&t=46063&p=610083#p610083 |
Author: | Bamaboy2223 [ Sat Oct 05, 2013 8:35 pm ] |
Post subject: | Re: Got my 1st mudboat |
MM Brand: gator tail Horsepower: 23 Boat Brand: weld built Boat Size: 1448 Boat Layout: open floor Speeds | Shallow Water: 22 Speeds | Deep Water:21 Total Boat Load With Gear Etc: 2 men (200 pounds each) guns and gear, half dozen geese floaters, 6 gallons gas and battery located in the rear by motor. Conditions Tested In: light ripple on main river, smooth as glass backwater Comments: I thought it would be faster, dont really know how to trim it where its supposed to run but i learned trim way down in the mud and running the river i trimmed it up all the way then just bumped it down a couple notches and it seemed the fastest that way. Takes a minit to get on plane. And the exhaust is way too loud, i put ear plugs in. Doest turn good running wide open but fine if you throttle down. Overall im happy with it. Just gonna take some experience and tuning on them speeds. |
Author: | Will [ Sat Oct 05, 2013 8:38 pm ] |
Post subject: | Re: Got my 1st mudboat |
Hot dam, a review! |
Author: | Bamaboy2223 [ Sat Oct 05, 2013 8:42 pm ] |
Post subject: | Re: Got my 1st mudboat |
shut up will, quit being a D bag and give some good advice for a NEWB lol |
Author: | North LA Hunter [ Sat Oct 05, 2013 8:43 pm ] |
Post subject: | Re: Got my 1st mudboat |
HOLY CHIT!!!!!!!!!!!! That's much better!! Get a GPS in your hand and run it at all trim levels. I would think it would be running a little faster than that. Measure your prop too. Don't know what size prop comes on the 23 (maybe 11x10) As for the exhaust you might can call BPS and get a silencer for it. It should have came with one when the original buyer bought it. Or sell it and buy a stocker. Sent from my beeper. |
Author: | Bamaboy2223 [ Sat Oct 05, 2013 8:50 pm ] |
Post subject: | Re: Got my 1st mudboat |
yeah i need to get a GPS, i just used an app i loaded on the ol iPhone. Hunting again in the morning so i'll play with it a little more. and measure that prop too. Thanks guys |
Author: | Bamaboy2223 [ Sat Oct 05, 2013 8:53 pm ] |
Post subject: | Re: Got my 1st mudboat |
oh yeah i also crawled under the boat when i got home, cuz when i bought it i just peeked under but its in pretty rough shape, 4 or 5 welded up spots and 2 patch pieces welded on it, one spot they welded a bead all the way down like 3 feet on one of the ribs. Iv seen a little talk about slick bottom boats or whatever, idk what that is. Maybe my speed wont be as good cuz of the shape of the bottom of the boat. Not sure how critical that is or if it matters. |
Author: | Will [ Sat Oct 05, 2013 8:56 pm ] |
Post subject: | Re: Got my 1st mudboat |
Thats very critical and I did help, gave you an example to go by and you did. Now you'll get feed back. Jack. |
Author: | Westi [ Sat Oct 05, 2013 9:02 pm ] |
Post subject: | Re: Got my 1st mudboat |
There you go man. That was a great review. The bottom of that hull will greatly affect your performance. A true mud hull is a slick bottom, meaning that there are no ribs and it is built completely smooth. I know its not what you wanna hear, but to get optimal performance, you need a new hull. |
Author: | Broadriverboy [ Sun Oct 06, 2013 11:51 am ] |
Post subject: | Re: Got my 1st mudboat |
Ill buy your exhaust if its too loud |
Page 1 of 1 | All times are UTC - 6 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |