^^^.
| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| Cottonmouth 648 XLR8 w/35 GTR http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=5&t=49273 |
Page 1 of 1 |
| Author: | thirdtimesacharm [ Fri Jan 17, 2014 4:24 pm ] |
| Post subject: | Cottonmouth 648 XLR8 w/35 GTR |
Before we start...... We hung this motor just to check the recessed transom with the reverse plate for function. I'm building two now for gtr's one 17' and one 18'6". I was worried we would get negative performance due to length but did extremely well. Specs Hull- 16' overall 48" bottom 18" sides 65" beam 4' front deck 18" huntdeck/ recessed transom Motor- bone stock gtr w/ 0 hours Speeds- Just me 230 lbs. 4 gallons gas, battery and safety gear 31-32 consistent 4150-4200 rpm's 4 of us 230-250 each 26 consistent 3900-4000 rpm's |
|
| Author: | thirdtimesacharm [ Fri Jan 17, 2014 4:25 pm ] |
| Post subject: | Re: Cottonmouth 648 XLR8 w/35 GTR |
http://youtu.be/QzWKF_C3L3A Here's a short clip solo. |
|
| Author: | dixieducker [ Fri Jan 17, 2014 7:23 pm ] |
| Post subject: | Re: Cottonmouth 648 XLR8 w/35 GTR |
DANG! I need one of these! |
|
| Author: | Hawknz84 [ Fri Jan 17, 2014 7:28 pm ] |
| Post subject: | Re: Cottonmouth 648 XLR8 w/35 GTR |
Nice looking boat man and those are pretty good speeds |
|
| Author: | btmannin [ Fri Jan 17, 2014 7:28 pm ] |
| Post subject: | Re: Cottonmouth 648 XLR8 w/35 GTR |
^^^.
|
|
| Author: | Buzz Killington [ Fri Jan 17, 2014 10:13 pm ] |
| Post subject: | Re: Cottonmouth 648 XLR8 w/35 GTR |
26mph with 4 guys in a 1648.... Thats ....odd.... Rare to see those speeds with that load Brandon M. KCCO |
|
| Author: | JLACOUR [ Fri Jan 17, 2014 10:41 pm ] |
| Post subject: | Re: Cottonmouth 648 XLR8 w/35 GTR |
Awesome numbers. Congrats! |
|
| Author: | thirdtimesacharm [ Sat Jan 18, 2014 2:22 am ] |
| Post subject: | Re: Cottonmouth 648 XLR8 w/35 GTR |
Believe me buzz I'm with you. We piled in more as a joke.... Like I said it was just put on there to make sure I didn't have to make adjustments to the recess. Honestly the reason it did so well is the crimps on the xlr8 make the hull lift. The xlr8 was originally designed for packing a load with smaller motors but seems to work well with the big ones too. |
|
| Author: | thirdtimesacharm [ Sat Jan 18, 2014 2:23 am ] |
| Post subject: | Re: Cottonmouth 648 XLR8 w/35 GTR |
Believe me buzz I'm with you. We piled in more as a joke.... Like I said it was just put on there to make sure I didn't have to make adjustments to the recess. Honestly the reason it did so well is the crimps on the xlr8 make the hull lift. The xlr8 was originally designed for packing a load with smaller motors but seems to work well with the big ones too. |
|
| Author: | Buzz Killington [ Sat Jan 18, 2014 6:56 am ] |
| Post subject: | Re: Cottonmouth 648 XLR8 w/35 GTR |
Im quite impressed Those are really good speeds Brandon M. KCCO |
|
| Author: | mcranger [ Sun Jan 19, 2014 9:56 pm ] |
| Post subject: | Re: Cottonmouth 648 XLR8 w/35 GTR |
WOW!!!! |
|
| Author: | bmartina [ Sun Jan 19, 2014 10:03 pm ] |
| Post subject: | Re: Cottonmouth 648 XLR8 w/35 GTR |
Smart with the crimps !! I agree some of these boats need some lift with loads for deep water |
|
| Author: | woodiewacker [ Sun Feb 02, 2014 12:13 am ] |
| Post subject: | Re: Cottonmouth 648 XLR8 w/35 GTR |
How much for that rig setup the way it is there in the pics? |
|
| Author: | mizzippi jb [ Sun Feb 02, 2014 7:04 am ] |
| Post subject: | Re: Cottonmouth 648 XLR8 w/35 GTR |
Very nice! |
|
| Author: | mud slinger 69 [ Sun Feb 02, 2014 7:32 am ] |
| Post subject: | Re: Cottonmouth 648 XLR8 w/35 GTR |
Hell ya nice boat. |
|
| Author: | Glades Ranger [ Tue Feb 04, 2014 4:05 am ] |
| Post subject: | Re: Cottonmouth 648 XLR8 w/35 GTR |
Incredible speeds for a stock unit. The 18' hull should be the winner! |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|