There is nothing wrong with that
| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| 1648 Scully Hull w/36 PD http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=5&t=5017 |
Page 1 of 2 |
| Author: | tacmc6 [ Thu Oct 01, 2009 2:33 pm ] |
| Post subject: | 1648 Scully Hull w/36 PD |
I had this boat built for a longtail a few years back and then put a 40 Mercury on it. I took a ride with LA OUTLAW on my lease about 6 months ago and while experiencing this ride on wet ground/marsh/land/trees,etc I knew what I had to do. I sold the Mercury and had Casey St.Romain of Sportsman Fabrication in Morgan City, LA extend my deck, put in aluminum flooring, a battery tray and I guess you would call it a standing/holding post with drink holder. I then got a GREAT deal from ProDrive in Loreauville, LA from Peck on a 36 hp demo and CoonDik installed a BPS Crossover exhaust. Here are a few pictures of my "Little Cute Boat" as UNCLE J calls it. http://s568.photobucket.com/albums/ss129/traviscrouch/ |
|
| Author: | dog walker [ Thu Oct 01, 2009 2:39 pm ] |
| Post subject: | Re: 1648 Scully Hull w/36 PD |
There is nothing wrong with that
|
|
| Author: | dog walker [ Thu Oct 01, 2009 2:39 pm ] |
| Post subject: | Re: 1648 Scully Hull w/36 PD |
There is nothing wrong with that
|
|
| Author: | LA OUTLAW [ Thu Oct 01, 2009 6:53 pm ] |
| Post subject: | Re: 1648 Scully Hull w/36 PD |
Homeboy had a thousand yard stare with a smile on his face like a kid in a candy store.. He was completely sold on a prodrive when we got back to the camp. |
|
| Author: | deltaduckmaster [ Thu Oct 01, 2009 6:55 pm ] |
| Post subject: | Re: 1648 Scully Hull w/36 PD |
| Author: | UNCLE-J [ Thu Oct 01, 2009 6:58 pm ] |
| Post subject: | Re: 1648 Scully Hull w/36 PD |
Trav, That is a cute boat.. You want to sell it? |
|
| Author: | deltaduckmaster [ Thu Oct 01, 2009 7:09 pm ] |
| Post subject: | Re: 1648 Scully Hull w/36 PD |
| Author: | LA OUTLAW [ Thu Oct 01, 2009 7:13 pm ] |
| Post subject: | Re: 1648 Scully Hull w/36 PD |
| Author: | tacmc6 [ Thu Oct 01, 2009 7:21 pm ] |
| Post subject: | Re: 1648 Scully Hull w/36 PD |
Thanks for your concern deltaduckmaterbater but I think I will be alright with the PD. I looked at both motors and the PD best fits my needs. By chance if that GT does pass me up I will wave and take another sip of my cold beverage and hell knowing me probably scratch my sack while thinking of you.  I love this site.
|
|
| Author: | LA OUTLAW [ Thu Oct 01, 2009 7:31 pm ] |
| Post subject: | Re: 1648 Scully Hull w/36 PD |
| Author: | mcnemar1982 [ Thu Oct 01, 2009 8:38 pm ] |
| Post subject: | Re: 1648 Scully Hull w/36 PD |
That is a really nice rig! 
|
|
| Author: | deltaduckmaster [ Thu Oct 01, 2009 8:41 pm ] |
| Post subject: | Re: 1648 Scully Hull w/36 PD |
| Author: | deltaduckmaster [ Thu Oct 01, 2009 8:43 pm ] |
| Post subject: | Re: 1648 Scully Hull w/36 PD |
| Author: | LA OUTLAW [ Thu Oct 01, 2009 8:53 pm ] |
| Post subject: | Re: 1648 Scully Hull w/36 PD |
| Author: | deltaduckmaster [ Thu Oct 01, 2009 8:55 pm ] |
| Post subject: | Re: 1648 Scully Hull w/36 PD |
| Author: | tacmc6 [ Thu Oct 01, 2009 8:57 pm ] |
| Post subject: | Re: 1648 Scully Hull w/36 PD |
Aw poor baby, Did this kid hurt your little feelings deltaduckmasterbater? I'm sorry, I'm only a kid. Please don't tell my mommy, she will spank me and I will be punished and won't be able to watch Disney. Yeah whatever candy-a$$. I was just posting about my boat and you want to jump in with your crap about GT is better. I don't care about all that crap. Both Gt and PD are good motors, so wipe your tears and BTFO! What, no Mom just 5 more minutes, please let me stay up longer. 
|
|
| Author: | LA OUTLAW [ Thu Oct 01, 2009 8:59 pm ] |
| Post subject: | Re: 1648 Scully Hull w/36 PD |
| Author: | deltaduckmaster [ Thu Oct 01, 2009 9:02 pm ] |
| Post subject: | Re: 1648 Scully Hull w/36 PD |
| Author: | tacmc6 [ Thu Oct 01, 2009 9:07 pm ] |
| Post subject: | Re: 1648 Scully Hull w/36 PD |
Don't get so mad, I thought this was all in good fun? If I could shove them there I know I could use my reverse to get out. Dude just chill, nothing personal, just clowning around.
|
|
| Author: | craig [ Thu Oct 01, 2009 9:16 pm ] |
| Post subject: | Re: 1648 Scully Hull w/36 PD |
|
|
|
| Author: | deltaduckmaster [ Fri Oct 02, 2009 5:08 am ] |
| Post subject: | Re: 1648 Scully Hull w/36 PD |
| Author: | deltaduckmaster [ Fri Oct 02, 2009 5:12 am ] |
| Post subject: | Re: 1648 Scully Hull w/36 PD |
| Author: | tacmc6 [ Fri Oct 02, 2009 7:30 am ] |
| Post subject: | Re: 1648 Scully Hull w/36 PD |
Actually deltaduckmaster I don't think it's running that good at all. I was hoping for about 25 or 26 steadily but it's not. I'm only averaging around 22 to 23. This is with my two sons and myelf with 6 gallons of fuel and an icechest with drinks. I weigh a slim 285 and my youngest is 110 and my oldest is 165. This is in deep water. UNCLE J measured my wheel and says it's thin and only 12 inches in diameter. Can't figure it out. I tried moving weight all over the boat trying things and still no change. I might try his wheel and see what happens. |
|
| Author: | deltaduckmaster [ Fri Oct 02, 2009 1:18 pm ] |
| Post subject: | Re: 1648 Scully Hull w/36 PD |
| Author: | muddiejeep [ Fri Oct 02, 2009 2:24 pm ] |
| Post subject: | Re: 1648 Scully Hull w/36 PD |
what are your rpms out of the water? |
|
| Author: | tacmc6 [ Fri Oct 02, 2009 2:27 pm ] |
| Post subject: | Re: 1648 Scully Hull w/36 PD |
I think 4200. With the load of spoke of 4090. |
|
| Author: | BODUKE_7 [ Fri Oct 02, 2009 3:54 pm ] |
| Post subject: | Re: 1648 Scully Hull w/36 PD |
JUST A ? DO YOU LIKE THAT BPS EXHAUST, I'M THINKING OF GOING WITH THE BPS OR THE EVT.I WOULD APPRECIATE YOU INFO. |
|
| Author: | basinhunter [ Fri Oct 02, 2009 4:35 pm ] |
| Post subject: | Re: 1648 Scully Hull w/36 PD |
| Author: | BODUKE_7 [ Sat Oct 03, 2009 8:05 am ] |
| Post subject: | Re: 1648 Scully Hull w/36 PD |
SOUNDS LIKE YOU HAVE A HOOK IN THE BOTTOM OF UR BOAT!! I DO HAVE A LITTLE EXP. WITH PHUCKED UP BOATS. WHAT DO YOU RUN BY YOURSELF |
|
| Author: | tacmc6 [ Sat Oct 03, 2009 11:51 am ] |
| Post subject: | Re: 1648 Scully Hull w/36 PD |
Love the crossover exhaust, sounds wicked!! To bad the speed don't match the sound. lol Never ran it alone. I'm told a few people are going to run in the basin tomorrow. I'm going to show up and see if some of these guy's can run my boat and give me some insight. I'm clueless!! I'm a virgin at running surface drive motors, so any advise is greatly needed. |
|
| Author: | deltaduckmaster [ Sat Oct 03, 2009 12:17 pm ] |
| Post subject: | Re: 1648 Scully Hull w/36 PD |
| Author: | shallow water master [ Sat Oct 03, 2009 12:55 pm ] |
| Post subject: | Re: 1648 Scully Hull w/36 PD |
| Author: | LA OUTLAW [ Sat Oct 03, 2009 3:31 pm ] |
| Post subject: | Re: 1648 Scully Hull w/36 PD |
Hey "T" Let dusty run it.. I bet he will give her a good test run....
|
|
| Author: | BODUKE_7 [ Sat Oct 03, 2009 5:33 pm ] |
| Post subject: | Re: 1648 Scully Hull w/36 PD |
| Author: | basinhunter [ Sat Oct 03, 2009 5:46 pm ] |
| Post subject: | Re: 1648 Scully Hull w/36 PD |
| Author: | chazman [ Mon Oct 05, 2009 6:04 pm ] |
| Post subject: | Re: 1648 Scully Hull w/36 PD |
as usual yall got off the subject scully built a nice boat and casey did nice modifacations nice rig dude!!!
|
|
| Author: | LA OUTLAW [ Mon Oct 05, 2009 6:07 pm ] |
| Post subject: | Re: 1648 Scully Hull w/36 PD |
X2 but now you need that coondik mojo on that motor!!!!!
|
|
| Author: | schrieverboy [ Mon Oct 05, 2009 6:14 pm ] |
| Post subject: | Re: 1648 Scully Hull w/36 PD |
| Author: | chazman [ Mon Oct 05, 2009 6:48 pm ] |
| Post subject: | Re: 1648 Scully Hull w/36 PD |
why you on mmt on a sat during hutin season need to change some of yalls names scared of a lil rain?? 
|
|
| Author: | UNCLE-J [ Thu Oct 08, 2009 8:49 am ] |
| Post subject: | Re: 1648 Scully Hull w/36 PD |
| Page 1 of 2 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|