MudmotorTalk.com
http://www.mudmotortalk.com/mmt_v2/

20.2mph with a hunt load...slow to get to speed.
http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=5&t=56984		 Page 1 of 1
Author:  Buzz Killington [ Sun Sep 28, 2014 1:21 pm ]
Post subject:  20.2mph with a hunt load...slow to get to speed.
But it got there.

3 of us and 6 dozen decoys, 3 guns, 9 gal fuel, blind, all the gear on board. ..

Once on step got 20.2 avg speed on a glass calm day.

Stopped for a minute in the middle of the lake - hammered the throttle again...got to 10mph...then 11..13...16....18...19.7......20

Took a while =)

Not bad for a 1760 lowe and a bone stock 35 HD Sport.

Pretty happy considering one of my guys is 330 with his waders and coat on.
Author:  btmannin [ Sun Sep 28, 2014 1:29 pm ]
Post subject:  Re: 20.2mph with a hunt load...slow to get to speed.
Not bad at all bud.
Author:  brickgw [ Sun Sep 28, 2014 1:29 pm ]
Post subject:  Re: 20.2mph with a hunt load...slow to get to speed.
I was right there with ya last year buzz. I haven't had a big hunt load in the rig since I had my valves lapped n heads decked, hopefully it makes a difference. At least ya got there though!
Author:  mudxxed [ Sun Sep 28, 2014 6:29 pm ]
Post subject:  Re: 20.2mph with a hunt load...slow to get to speed.
Just wait till u do heads and carb. Be stepping that same load at 27
Author:  Mudducker11 [ Thu Oct 02, 2014 11:37 am ]
Post subject:  Re: 20.2mph with a hunt load...slow to get to speed.
Mudxxed aint lying.. When we had our 35HD sport, we did only the minkuni carb and the Q muffler and it was like having a whole new motor. So much more hole shot and top speed
Author:  MNGunner [ Thu Oct 02, 2014 6:04 pm ]
Post subject:  Re: 20.2mph with a hunt load...slow to get to speed.
Author:  mudxxed [ Thu Oct 02, 2014 7:47 pm ]
Post subject:  Re: 20.2mph with a hunt load...slow to get to speed.
Naw I'd make 330 boy get his own boat
Author:  Buzz Killington [ Mon Oct 06, 2014 6:40 pm ]
Post subject:  Re: 20.2mph with a hunt load...slow to get to speed.
Lol

You guys are a hoot

I was contemplating the mikuni and a Q muffler

$$$$$

But it would be nice to see how it does in the cold north this season bone stock.

Maybe next year
Author:  kaleb.towles [ Mon Oct 06, 2014 7:10 pm ]
Post subject:  Re: 20.2mph with a hunt load...slow to get to speed.
Grandpa always told me "if it works, don't fuck with it" haha
Author:  Buzz Killington [ Mon Oct 06, 2014 7:19 pm ]
Post subject:  Re: 20.2mph with a hunt load...slow to get to speed.
Cheaper too^^ =)
Author:  tinman454 [ Mon Oct 06, 2014 11:05 pm ]
Post subject:  Re: 20.2mph with a hunt load...slow to get to speed.
Fuck that bud you save some cash and up grade that motor. :D Ask for the muffler for Christmas! I will never drive stock again!
Author:  Buzz Killington [ Tue Oct 07, 2014 3:35 am ]
Post subject:  Re: 20.2mph with a hunt load...slow to get to speed.
Author:  mudxxed [ Wed Oct 08, 2014 7:32 am ]
Post subject:  Re: 20.2mph with a hunt load...slow to get to speed.
Author:  Buzz Killington [ Wed Oct 08, 2014 8:07 am ]
Post subject:  Re: 20.2mph with a hunt load...slow to get to speed.
Yall gonna donate to my new charity?

The buy me mods charity? Non tax deductible.
Author:  Buzz Killington [ Mon Dec 15, 2014 5:12 pm ]
Post subject:  Re: 20.2mph with a hunt load...slow to get to speed.
Well tested out max load capacity today.

1465 lbs made up of stuff in the boat including

4 guys and a lot of gear
Rediculous amount of decoys on long lines
9 gal fuel
Ice on the boat

Breakneck speeds of





8.5mph.

Would not plane out we PLOWED for 5 miles to the blind today. Sloooow going but we still had fun.

The review continues.
Author:  270Handiman [ Mon Dec 15, 2014 6:45 pm ]
Post subject:  Re: 20.2mph with a hunt load...slow to get to speed.
Lol....nice. Saving for mods yet?

Out of curiosity, what rpm's were you maxing out at at 8.5 mph?
Author:  Buzz Killington [ Mon Dec 15, 2014 6:48 pm ]
Post subject:  Re: 20.2mph with a hunt load...slow to get to speed.
3990 rpm
Author:  Smoke [ Mon Dec 15, 2014 7:01 pm ]
Post subject:  Re: 20.2mph with a hunt load...slow to get to speed.
Buzz heads carb and cam bro and don't look back. That boat will
Carry a hell of a load after mods.
Author:  Buzz Killington [ Mon Dec 15, 2014 7:06 pm ]
Post subject:  Re: 20.2mph with a hunt load...slow to get to speed.
Bah, I dont usually have that heavy of a hunt load - 2 or 3 at the most usually at 15-22 mph

This was a special day with 4 of us.

Sure I want to mod this out, but I dont need to ;) valves need to be re seated but season's almost done. I'm patient =)
Author:  OlSchool [ Mon Dec 15, 2014 7:11 pm ]
Post subject:  Re: 20.2mph with a hunt load...slow to get to speed.
What size boat / motor??
Author:  270Handiman [ Mon Dec 15, 2014 7:12 pm ]
Post subject:  Re: 20.2mph with a hunt load...slow to get to speed.
Author:  Buzz Killington [ Mon Dec 15, 2014 7:13 pm ]
Post subject:  Re: 20.2mph with a hunt load...slow to get to speed.
Breakneck speeds =)
Author:  msm8281 [ Mon Dec 15, 2014 7:23 pm ]
Post subject:  Re: 20.2mph with a hunt load...slow to get to speed.
You may need to weigh that 330#er again to find out how many twinkies he consumed since your last outing. He may have packed on a few more pounds since.
Author:  Buzz Killington [ Mon Dec 15, 2014 7:26 pm ]
Post subject:  Re: 20.2mph with a hunt load...slow to get to speed.
Oh he's a solid 350 now =)
Author:  msm8281 [ Mon Dec 15, 2014 7:29 pm ]
Post subject:  Re: 20.2mph with a hunt load...slow to get to speed.
Author:  Buzz Killington [ Mon Dec 15, 2014 7:32 pm ]
Post subject:  Re: 20.2mph with a hunt load...slow to get to speed.
Hahaha

I like that idea!
Page 1 of 1 All times are UTC - 6 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/