I'm just curious... Do any of you guys make modifications to your throttle lever? I hated the throttle lever that go devil makes with the little ball on it so I scrapped it, and made my own. I used a clutch perch and lever that I ordered from a dirtbike magazine along with a new throttle cable. I love this setup! I was just curious if anyone else has changed their throttle setups. I will post pics as soon as I can get some.

Thats what I plan to do actually. I just bought a used 16 hp lt and think that a throttle that staysd open when shit gets ugly is a bad idea.

A few guys in our hunting club have the clutch lever set up from a dirtbike too and they love it

curious which way dp you guys face the lever? I am thinking down would be good. Then it wont want to ramp up on the prop spin. But maybe on the opposite side of prop spin.

I will post up some pics when I am able to take them. I absolutely love it! I was scared of the throttle that stayed wide open. Pretty stupid if you ask me. I can let go of the clutch lever throttle setup and the motor will go straight back to idle. I love that!

I use a bicycle brake lever, works great.

search is yo friend

viewtopic.php?f=6&t=1731&p=18726&hilit=brake+handle+throttle#p18726

x2 on bicycle brake.

Here is what I came up with. Works perfect!!

Question..... Did you have to put a return spring on the carb linkage?

There was already a spring on my Go Devil.

Never looked at mine, mine may have one also... But was thinking one would be needed..

Like the Mod very well will be sure to add have some old 4 wheeler brakes and throttles may need to carry an extra cable just in Case . How would an old twist throttle work out any one tried it ?

Yup, the huffy got it. Damn a throttle that stays open when the sht hits the fan, just gotta learn to drag them feet so I don't eat sht on the bike now.

I thought about putting the NO BREAK ASV levers on mine like you put on dirt bikes!

I have tried a twist grip and the squeez lever. The preference seems to be for the squeez lever that returns to idle when you let go of it. It depends on what the motor was set up with ,wether or not a spring has to be added to the linkage assy. I now use a poly lined outer cable houseing and a stainless or teflon coatee inner cable to reduce friction in the assy and fatigue in the little fingers.

Mark