| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| Home build cav plate set up. http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=6&t=32785 |
Page 1 of 1 |
| Author: | homegrownlt [ Sat Sep 29, 2012 11:29 am ] |
| Post subject: | Home build cav plate set up. |
ImageUploadedByTapatalk1348939423.387770.jpgI am getting near the end of my second home made LT and would appreciate any advice on the cavitation plate angle. Should it be in line with the bottom of the boat (15" transom), slightly lower or higher? |
|
| Author: | homegrownlt [ Mon Oct 15, 2012 6:34 pm ] |
| Post subject: | Re: Home build cav plate set up. |
Thanks for the help. :/ I got it all done and went for a test run. The cavitation plate is not angled enough but not so far off that it can't be reworked a little. I got up to 15 mph with no governor mods. So that's a good starting point. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|