| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| Backwater must be swomped...pun intended http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=6&t=63729 |
Page 1 of 1 |
| Author: | Florida Grown [ Thu Sep 17, 2015 5:07 am ] |
| Post subject: | Backwater must be swomped...pun intended |
ugggh, this poor white guy finally had enough coin to buy his first MM , placed order via phone on the 10th and here it is the 17th and the unit isn't even en route. And no idea when it will begin it's journey home. Already called yesterday, jake said unit not shipped and would send me a tracking whenever it gets shipped and was busy on another line... not trash talkin them, just frustrated n ready to finally have a motor on my POS tiny riveted boat.. |
|
| Author: | FRANKtheTAU [ Thu Sep 17, 2015 6:30 pm ] |
| Post subject: | Re: Backwater must be swomped...pun intended |
Congrats on the purchase! Patience grasshopper. You'll have your motor soon enough. You just ordered in the middle of their busy season. Everyone and their brother is ordering a motor right now in preparation for duck season coming up. Let us know when it shows up and you get to run it! |
|
| Author: | jakehawk9 [ Thu Sep 17, 2015 6:43 pm ] |
| Post subject: | Re: Backwater must be swomped...pun intended |
Not trying to stir the shit. Sure it's a whole different deal. But I got my prop in 3 days It's simple. get a mud motor. shoot ducks in the face. |
|
| Author: | Florida Grown [ Thu Sep 17, 2015 7:19 pm ] |
| Post subject: | Re: Backwater must be swomped...pun intended |
I'm keepin cool, hell the reason I didnt buy a clp/kkk/sps/etc..is cause I found this awesome site. Not saying those units dont have their place, just realized I wanted my first experience w/a mm to be with sonething a bit more quality. I'm no duck hunter actually this is for a fishin boat to get in the skinny but speakn o ducks... while in garage tonight working on framing the rear pass thru seats im sipin on this.. |
|
| Author: | btmannin [ Thu Sep 17, 2015 7:28 pm ] |
| Post subject: | Re: Backwater must be swomped...pun intended |
Good choice of motor and beer. Congrats on the purchase, give us a review when ya get it. |
|
| Author: | mudxxed [ Thu Sep 17, 2015 8:02 pm ] |
| Post subject: | Re: Backwater must be swomped...pun intended |
I can't drink that goose IPA. God the hops! |
|
| Author: | North LA Hunter [ Thu Sep 17, 2015 8:39 pm ] |
| Post subject: | Re: Backwater must be swomped...pun intended |
Better than a 12 week wait on a GTR!!! Congrats!!! Sent from my iPhone using Tapatalk |
|
| Author: | Florida Grown [ Thu Sep 17, 2015 9:30 pm ] |
| Post subject: | Re: Backwater must be swomped...pun intended |
Hehehe, nowadays i dont get to drink much, but when I do ....why not not get hoppy bout it. Herei am all mad bout shippin n the darn thing 'll prolly sink with all that weight lmao. Then I'll be stuck like chuck sitting here counting pennies I find @ gas stations for a bigger hull....maybe I'll take this ship time ta look more into a new dog breed since the setter just passed. I better stop while ahead. Thanks for a great site and all the info. |
|
| Author: | Glades Ranger [ Fri Sep 18, 2015 3:48 am ] |
| Post subject: | Re: Backwater must be swomped...pun intended |
Hey Florida, never too late to get into duck hunting! I mean, when the fishing is bad, might as well shoot some ducks. Today is payday, I'm getting some premium brew for the teal opener tomorrow. Haven't seen too many ducks, but don't want to get rusty. Have fun with the swomp! 
|
|
| Author: | tfd1224 [ Fri Sep 18, 2015 9:32 am ] |
| Post subject: | Re: Backwater must be swomped...pun intended |
I ordered a 35 On Monday and jake said it would be 7 to 10 days. It's only been 7 for you, be patient. Jake said they had a lot of orders right now and that they keep motors and frames in stock but they assemble them per order. That's what the wait is. |
|
| Author: | stu [ Fri Sep 18, 2015 10:48 am ] |
| Post subject: | Re: Backwater must be swomped...pun intended |
Congrats on the new motor. Put up a review when you get it bolted on and running. No ducks down here Glades.... Sent from my iPhone using Tapatalk |
|
| Author: | 1chance [ Fri Sep 18, 2015 12:25 pm ] |
| Post subject: | Re: Backwater must be swomped...pun intended |
I know how you feel I had to wait 3 weeks on mine last year and didn't get it until after the opener. Looking back, it was WELL worth the wait! Get it on the boat this year and start saving cash for a used custom hull for a year or 2 down the rd. I found mine in the classifieds here on MMT and it was some of the best money I could have spent. Keep patient.....but if you can't, have another beer  Enjoy
|
|
| Author: | T SHOT [ Wed Sep 23, 2015 5:06 pm ] |
| Post subject: | Re: Backwater must be swomped...pun intended |
Hey Florida What size motor did you order, I've been waiting for a 37 ordered it the 17th. |
|
| Author: | Florida Grown [ Thu Sep 24, 2015 8:07 pm ] |
| Post subject: | Re: Backwater must be swomped...pun intended |
The 23 lite. Actually picked it up today from Fedex. |
|
| Author: | tfd1224 [ Thu Sep 24, 2015 8:52 pm ] |
| Post subject: | Re: Backwater must be swomped...pun intended |
| Author: | Florida Grown [ Fri Sep 25, 2015 2:44 am ] |
| Post subject: | Re: Backwater must be swomped...pun intended |
all of you buyin up big blocks, I couldn't go any bigger its already too much for rhe current hull. I had to stay with a SB I didn't expect to see it shipped assembled, do I need to grease the unit or does it come greased? There wasnt any paperwork indicating either.never owned a MM and i'm happy with the quailty , its pretty stout and all the welds looked good. Im just hoping the boat dont sink and I end up needing pods(band-aids) until I can save for a tad bigger hull.. I know a lock isnt gonna stop some determined scumbag, but how the heck can I try n lock this thing? Only way it looks like is to replace the 19mm pivot bolt with something else . |
|
| Author: | T SHOT [ Fri Sep 25, 2015 3:34 am ] |
| Post subject: | Re: Backwater must be swomped...pun intended |
I asked Arlon about that the shaft is shipped greased on the 37 if you have any questions give them a call. I asked him several questions before I even placed the order and he answered everyone and then some. |
|
| Author: | FRANKtheTAU [ Fri Sep 25, 2015 6:41 am ] |
| Post subject: | Re: Backwater must be swomped...pun intended |
Put oil in the motor, hook up battery and gas. Go like hell!!! |
|
| Author: | Glades Ranger [ Fri Sep 25, 2015 6:45 am ] |
| Post subject: | Re: Backwater must be swomped...pun intended |
I don't own a BackH20 but looking at the transom clamping bolts, I think you can put one of those rectangular box locks that slide over the bolt heads- might require a large washer or two. Additionally, I believe there are through bolt attachment holes on the transom plate to secure it. That would definitely be one deterrent. Anyway, I'd like to hear what BackH20 says about locking it, seeing as I intend to buy one in the next season or two. |
|
| Author: | stu [ Fri Sep 25, 2015 7:11 am ] |
| Post subject: | Re: Backwater must be swomped...pun intended |
FL Grown, this might not be the best theft detergent but it's how I've been doing it. I use a bike lock cable, wrap it around the out drive and lock it to my trailer frame. I don't think it'll prevent it from being stolen but it will slow down an amateur. Have fun with the new motor. Sent from my iPad using Tapatalk HD |
|
| Author: | Florida Grown [ Fri Sep 25, 2015 7:26 am ] |
| Post subject: | Re: Backwater must be swomped...pun intended |
Ok I got what you were talking about for the plate, but really the easies and quickest way for a thief would. Bw 2 19MM'S. On the single pivot bolt. Im thinking maybe I could weld it so that way it's gotta be ground off to remove that single bolt. No I know anything is just a deterrent, im just looking to discourage and slow them down. |
|
| Author: | 45th parallel [ Fri Sep 25, 2015 8:23 am ] |
| Post subject: | Re: Backwater must be swomped...pun intended |
One of these through the pivot and a bike lock through the frame is about all you can do. http://www.amazon.com/5-8-Locking-Hitch ... B001LQVP7O A determined thief will get it even if they have to work at it, rather than work at earning it the right way. If you are leaving it out someplace, I'd recommend insuring the rig and getting a game cam set up in a way to capture faces and license plates. God have mercy on any thief I catch because I won't. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|