It is currently Thu Mar 28, 2024 7:27 am




Reply to topic  [ 32 posts ] 
 35 backwater hard to steer..... 
Author Message
MMT Pro Member

Joined: Sun Mar 20, 2016 7:55 am
Posts: 92
Location: Coshocton Ohio
Post 35 backwater hard to steer.....
Is it just me or what? I have had my backwater 35 for almost a year now and am really impressed with what it can do! Does it steer hard because it’s a 35? I do reshim a lot due to load changes and fight blow outs, but it’s a handful compared to my buddies 22 swomp. He sits down and uses one hand to operate. I usually have to stand and use 2 hands. Is there anything I can do to help?

_________________
Alweld 1752 with Backwater 35


Wed Feb 07, 2018 7:37 pm
Profile
MMT 1000 Club

Joined: Sun Dec 14, 2014 2:21 pm
Posts: 3214
Post Re: 35 backwater hard to steer.....


Wed Feb 07, 2018 7:57 pm
Profile
MMT 1000 Club
User avatar

Joined: Thu Dec 29, 2011 10:30 pm
Posts: 1386
Location: West TN
Post Re: 35 backwater hard to steer.....
Something is off. Definitely shouldn't take 2 hands to steer. I've owned a 23 SWOMP and a 35 SWOMP and there's honestly not much, if any difference, especially once you're running on plane. Another thing is the shimming for different loads... I'm almost positive that shouldn't be necessary. At least I never had to re-shim any of my Backwater motors on either of my boats because I may or may not have been hauling a heavy load.

_________________
40 Backwater SWOMP Lite / 1752 Alweld Mud

6.5 Backwater SWOMP Lite / 1440 PolarKraft


Wed Feb 07, 2018 8:03 pm
Profile
MMT Sponsor

Joined: Fri Jan 10, 2014 1:16 pm
Posts: 2107
Location: Gladewater TX
Post Re: 35 backwater hard to steer.....
For me the bigblock longtails drive nice when straight but turning takes some patience. You've had a year with it so you are used to it. The only LT I know of that really turns is a smallblock on a light cheapy 1648. The bigblock is usally mounted on a bigger boat and you feel it when turning


Wed Feb 07, 2018 9:58 pm
Profile
MMT Sponsor

Joined: Fri Jan 10, 2014 1:16 pm
Posts: 2107
Location: Gladewater TX
Post Re: 35 backwater hard to steer.....
I just saw you have the same boat a Frank. So whatever he says will be good info


Wed Feb 07, 2018 10:02 pm
Profile
MMT Pro Member

Joined: Sun Mar 20, 2016 7:55 am
Posts: 92
Location: Coshocton Ohio
Post Re: 35 backwater hard to steer.....
It’s the long shaft on a 20” transom Alweld 1752. I need to take some time and get the shimming right. I have the motor in the middle pivot hole, versa mount is mounted outside the boat. With it being so low that it rubs the top of the transom. Driving straight doesn’t seem to be as difficult but definitely turning is... I thought maybe it was just the nature of it. Also my prop is a 9x8 and I’m hitting the rev limiter. Jake said to try a 10x5 through them at backwater. Anyone have any experience with that prop?

_________________
Alweld 1752 with Backwater 35


Wed Feb 07, 2018 10:15 pm
Profile
MMT 1000 Club
User avatar

Joined: Thu Dec 29, 2011 10:30 pm
Posts: 1386
Location: West TN
Post Re: 35 backwater hard to steer.....
I run a 10x6 hex prop on my 37. I can't remember what prop I ran on my 35.

_________________
40 Backwater SWOMP Lite / 1752 Alweld Mud

6.5 Backwater SWOMP Lite / 1440 PolarKraft


Thu Feb 08, 2018 7:44 am
Profile
MMT 1000 Club
User avatar

Joined: Thu Jan 31, 2013 5:42 pm
Posts: 1913
Location: Conroe tx
Post Re: 35 backwater hard to steer.....
I run a 10x5 hex on my 23 swomp, but it’s built .

H finn

_________________
Ole black water keep on rolling

18x54 Uncle J -GTR - with the koolaid
Back H2o SWOMP 23 SS stage 2 15x36 GD Duck Skiff GATOR
GATOR GLIDE PROSTAFF
BACKWATER PROSTAFF
http://www.gatorglide.com

Coupe rest in peace brother


Thu Feb 08, 2018 9:05 am
Profile
MMT 1000 Club
User avatar

Joined: Thu Dec 29, 2011 10:30 pm
Posts: 1386
Location: West TN
Post Re: 35 backwater hard to steer.....

_________________
40 Backwater SWOMP Lite / 1752 Alweld Mud

6.5 Backwater SWOMP Lite / 1440 PolarKraft


Thu Feb 08, 2018 9:23 am
Profile
MMT 1000 Club
User avatar

Joined: Thu Jan 31, 2013 5:42 pm
Posts: 1913
Location: Conroe tx
Post Re: 35 backwater hard to steer.....

_________________
Ole black water keep on rolling

18x54 Uncle J -GTR - with the koolaid
Back H2o SWOMP 23 SS stage 2 15x36 GD Duck Skiff GATOR
GATOR GLIDE PROSTAFF
BACKWATER PROSTAFF
http://www.gatorglide.com

Coupe rest in peace brother


Thu Feb 08, 2018 9:27 am
Profile
MMT Pro Member

Joined: Sun Mar 20, 2016 7:55 am
Posts: 92
Location: Coshocton Ohio
Post Re: 35 backwater hard to steer.....
I noticed today after loading the boat, my self has a slight bend in it and a cracked weld. I now know why it won’t run straight!!! I’m going to straighten it and re weld and see what happens. I also plan on ordering the 10x5 prop soon.

_________________
Alweld 1752 with Backwater 35


Thu Feb 08, 2018 12:58 pm
Profile
MMT 1000 Club

Joined: Sun Dec 14, 2014 2:21 pm
Posts: 3214
Post Re: 35 backwater hard to steer.....


Thu Feb 08, 2018 2:09 pm
Profile
MMT 1000 Club
User avatar

Joined: Thu Dec 29, 2011 10:30 pm
Posts: 1386
Location: West TN
Post Re: 35 backwater hard to steer.....

_________________
40 Backwater SWOMP Lite / 1752 Alweld Mud

6.5 Backwater SWOMP Lite / 1440 PolarKraft


Thu Feb 08, 2018 2:21 pm
Profile
MMT 1000 Club
User avatar

Joined: Thu Jan 31, 2013 5:42 pm
Posts: 1913
Location: Conroe tx
Post Re: 35 backwater hard to steer.....

_________________
Ole black water keep on rolling

18x54 Uncle J -GTR - with the koolaid
Back H2o SWOMP 23 SS stage 2 15x36 GD Duck Skiff GATOR
GATOR GLIDE PROSTAFF
BACKWATER PROSTAFF
http://www.gatorglide.com

Coupe rest in peace brother


Thu Feb 08, 2018 2:22 pm
Profile
MMT 1000 Club

Joined: Sun Dec 14, 2014 2:21 pm
Posts: 3214
Post 35 backwater hard to steer.....


Thu Feb 08, 2018 2:35 pm
Profile
MMT Pro Member

Joined: Tue Jan 10, 2012 10:04 am
Posts: 101
Post Re: 35 backwater hard to steer.....
I have a 35 backwater and have ran it since 2014. Easiest LT I have ever ran. I also ran the 10x5 prop. The downfall of the larger prop is if you run in stumps or heavy trash water, be careful or you will break a shaft since you will hit more objects below the water. You can always upgrade to the larger shaft but you must change out bearings and u joint. I first ran mine on a 1748 but have ran it on a 1852 the last couple of years. Can drive it sitting down with one hand!


Thu Feb 08, 2018 2:49 pm
Profile
MMT 1000 Club
User avatar

Joined: Thu Jan 31, 2013 5:42 pm
Posts: 1913
Location: Conroe tx
Post Re: 35 backwater hard to steer.....

_________________
Ole black water keep on rolling

18x54 Uncle J -GTR - with the koolaid
Back H2o SWOMP 23 SS stage 2 15x36 GD Duck Skiff GATOR
GATOR GLIDE PROSTAFF
BACKWATER PROSTAFF
http://www.gatorglide.com

Coupe rest in peace brother


Thu Feb 08, 2018 4:00 pm
Profile
MMT Pro Member

Joined: Sun Mar 20, 2016 7:55 am
Posts: 92
Location: Coshocton Ohio
Post Re: 35 backwater hard to steer.....
It actually broke and bent now that I think about it when I was backing up a while back and motor bounced down and I kept on backing. It has nothing to do with the product! It’s a wonder to as I drive a chevy! it’s not too bad and may not be the culprit but I’ll fix it for sure. Other than that the motor is a beast and every time I think I want to sell it I take it out and I’m amazed at what it can do!!! Thanks for all the help and info!

_________________
Alweld 1752 with Backwater 35


Thu Feb 08, 2018 5:02 pm
Profile
MMT Pro Member

Joined: Sun Mar 20, 2016 7:55 am
Posts: 92
Location: Coshocton Ohio
Post Re: 35 backwater hard to steer.....
It actually broke and bent now that I think about it when I was backing up a while back and motor bounced down and I kept on backing. It has nothing to do with the product! It’s a wonder to as I drive a chevy! it’s not too bad and may not be the culprit but I’ll fix it for sure. Other than that the motor is a beast and every time I think I want to sell it I take it out and I’m amazed at what it can do!!! Thanks for all the help and info!

_________________
Alweld 1752 with Backwater 35


Thu Feb 08, 2018 5:02 pm
Profile
MMT 1000 Club

Joined: Sun Dec 14, 2014 2:21 pm
Posts: 3214
Post Re: 35 backwater hard to steer.....


Thu Feb 08, 2018 5:08 pm
Profile
MMT Pro Member

Joined: Sun May 14, 2017 1:35 pm
Posts: 71
Post Re: 35 backwater hard to steer.....
I bet you're a lot of fun at parties.

_________________
1648MV SeaArk 37 EFI Backwater SWOMP Lite


Thu Feb 08, 2018 5:21 pm
Profile
MMT 1000 Club

Joined: Sun Dec 14, 2014 2:21 pm
Posts: 3214
Post Re: 35 backwater hard to steer.....


Thu Feb 08, 2018 5:33 pm
Profile
MMT 1000 Club

Joined: Thu May 23, 2013 4:24 pm
Posts: 2912
Location: Thibodaux, La
Post Re: 35 backwater hard to steer.....

_________________
1850 Predator Series Stick Steer Option
40HP Gatortail


Thu Feb 08, 2018 11:22 pm
Profile WWW
MMT Pro Member

Joined: Sun May 14, 2017 1:35 pm
Posts: 71
Post Re: 35 backwater hard to steer.....

_________________
1648MV SeaArk 37 EFI Backwater SWOMP Lite


Fri Feb 09, 2018 9:45 am
Profile
MMT F.E.
User avatar

Joined: Tue Aug 26, 2014 10:36 am
Posts: 822
Location: Jefferson TX
Post Re: 35 backwater hard to steer.....
And this one time in band camp! I was headed to my favorite duck hole when my 1964 Evinrude 18 hp Fastwin on a 1972 Appleby 14x42 hit a stump. Had to get out in knee deep water and change out the sear pin. It took almost 10 minutes!!! That's went I realized there has got to be a better way. First came props with pressed in rubber hubs/no sear pin, then the expensive stainless props. I may not have been there and done all of it, but I have seen a lot. You guys are lucky! Hell back in band camp we had to use "lead" shot with fixed choke shotguns!!! Had a damn point system for duck limits, so somebody had to be able to do simple math and ID a duck not just ID and count. :lol:

_________________
SEAARK FX 2472 CC Merc 150HP 4Stroke(CypressCadillac)
Uncle J Custom - 19x54 CC Skiff w/40XD GTR


Fri Feb 09, 2018 10:08 am
Profile
MMT 1000 Club

Joined: Mon Sep 19, 2011 6:32 pm
Posts: 1490
Location: south Florida
Post Re: 35 backwater hard to steer.....
Cypress, good story! I know some of the "young'uns" here had a mud motor first, unlike the veterans. That old 25 Evinrude of mine on that beat up French settlement, La. 1436 was rude, and I paid a lot in repairs and you could not go in a straight line, the prop continually being fouled by weeds, and if the motor stopped peeing, well you were risking it all. When you could run it flew fast as shit, but I don't cuss much anymore after my first 18 HP GD longtail I never looked back.
To get back on the thread topic, took a while to dial in my 26.5 Backwater, but Jake at BW sure helped and was right on with the inboard mounting of the versa mount!
As much as I welcome craft beer, I don't refuse an ice cold PBR! :mrgreen:

_________________
Sailing in the sawgrass /1648 grizzly and Swomp 26.5 EFI


Fri Feb 09, 2018 11:09 am
Profile
MMT 1000 Club

Joined: Sun Dec 14, 2014 2:21 pm
Posts: 3214
Post Re: 35 backwater hard to steer.....


Fri Feb 09, 2018 12:43 pm
Profile
MMT Pro Member

Joined: Sun Mar 20, 2016 7:55 am
Posts: 92
Location: Coshocton Ohio
Post Re: 35 backwater hard to steer.....
Definitely not a quality issue! I want to buy a small setup for our restricted lake

_________________
Alweld 1752 with Backwater 35


Fri Feb 09, 2018 1:19 pm
Profile
MMT 1000 Club
User avatar

Joined: Thu Nov 04, 2010 7:38 am
Posts: 4323
Location: Cut Off, La.
Post Re: 35 backwater hard to steer.....

_________________
Refurbishing a Prodrive


Fri Feb 09, 2018 1:20 pm
Profile
MMT Addict

Joined: Wed Mar 16, 2011 2:35 pm
Posts: 608
Location: Deerfield Beach FL,
Post Re: 35 backwater hard to steer.....

_________________
Swomp 35 on an 1848 Alumitec Custom


Fri Feb 09, 2018 1:33 pm
Profile
MMT Pro Member

Joined: Sun Mar 20, 2016 7:55 am
Posts: 92
Location: Coshocton Ohio
Post Re: 35 backwater hard to steer.....
Will do. I’m going to call and talk to Jake next week.

_________________
Alweld 1752 with Backwater 35


Fri Feb 09, 2018 6:31 pm
Profile
MMT Elite Member
User avatar

Joined: Mon Feb 06, 2012 6:13 pm
Posts: 5605
Location: D'town, LA
Post Re: 35 backwater hard to steer.....


Fri Feb 09, 2018 7:45 pm
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 32 posts ] 

Who is online

Users browsing this forum: No registered users and 114 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: