| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| Backwater props.... http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=6&t=72307 |
Page 1 of 1 |
| Author: | Walkerdogman85 [ Sun Apr 08, 2018 7:38 pm ] |
| Post subject: | Backwater props.... |
My props came the other day and I tested them out today on my 35 swomp. I ordered the 9x8 and the 10x6. I tried the 10x6 first and the hole shot was impressive!! Top speed was 23 hitting 24 with one guy and about 100 pounds additional gear in my Alweld 1752. I added a friend of mine (235) me 265 and speed was 22 hitting 23 now and again. Again hole shot was impressive! I then put the 9x8 on and same process, solo max was 24 mph but hole shot wasn’t good and took longer to reach top speed same with 2 guys. Speed was 20 with 2 guys. I messed with the governor last summer so my rpms with worn 9x8 were 4400. New 10x6 rpms were 4000 new 9x8 rpms were 4100. |
|
| Author: | ddhawkfan [ Mon Apr 09, 2018 1:49 pm ] |
| Post subject: | Re: Backwater props.... |
I just wish they listed the hex drive props either on their site or their ebay page, but i'm sure they are busy building Frank's new 40 |
|
| Author: | huck Finn [ Mon Apr 09, 2018 1:53 pm ] |
| Post subject: | Re: Backwater props.... |
The hex props are available, factory on all new products, just ask for them, call jake. Can also retro fit with the order of a new hex shaft, for existing models. H Finn |
|
| Author: | FRANKtheTAU [ Mon Apr 09, 2018 4:09 pm ] |
| Post subject: | Re: Backwater props.... |
| Author: | ddhawkfan [ Mon Apr 09, 2018 6:52 pm ] |
| Post subject: | Re: Backwater props.... |
| Author: | huck Finn [ Tue Apr 10, 2018 8:12 am ] |
| Post subject: | Re: Backwater props.... |
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|