Author |
Message |
Obxmm
MMT Member
Joined: Fri Nov 22, 2019 2:49 pm Posts: 5
|
Which boat Jon boat or wood skiff
I have backwater gx690 on order. I have 2 older boats to choose from. A wooden 1644 skiff or a 1636 aluminum boat. Both need a little work. Used in soft muddy marsh. No trees or rocks to be concerned. Which would you choose and why? First post and gonna be first mud motor.
You do not have the required permissions to view the files attached to this post.
|
Tue Nov 26, 2019 7:12 am |
|
|
aknative
MMT Pro Member
Joined: Thu Mar 05, 2015 8:56 pm Posts: 91
|
Re: Which boat Jon boat or wood skiff
Yes. The answer is yes.
You'd likely get better performance out of the aluminum boat given it's narrower hull and possibly being a lighter boat. If they're similar in weight, and using the same motor, I think the wooden boat being bigger, though it may be slower empty, will lose less speed when carrying the same load as the aluminum boat...maybe. I know that I can push my 1848 faster empty than I can the 2448, but the 2448 takes more to bog down.
I'd use whichever one is easier to make useable by the time the motor arrives. Then, when I wasn't playing in that one I'd work on the other, and when it's ready try it as well. If you do that, let us know what you find.
|
Wed Nov 27, 2019 9:11 pm |
|
|
Russ
MMT 1000 Club
Joined: Mon Dec 31, 2012 11:07 pm Posts: 4820 Location: West Monroe, LA
|
Re: Which boat Jon boat or wood skiff
Use the aluminum. Not enough difference between the 2 in base size for the 44 to be that much better, but the aluminum carries that width farther forward. Itll do better with a small longtail, and likely be a bit lighter than that wooden boat (dunno about the weight for sure, though).
#CFFITR #GhostBoat #Whoneedsphysicsihaveamudmotor
|
Wed Nov 27, 2019 9:59 pm |
|
|
Russ
MMT 1000 Club
Joined: Mon Dec 31, 2012 11:07 pm Posts: 4820 Location: West Monroe, LA
|
Re: Which boat Jon boat or wood skiff
Btw, that is gonna be a lot of motor for a boat that narrow. I've had that same engine on a 1546 and a 1442. Turning is gonna be entertaining for anyone not in the boat with you, and squirrelly with this being your first longtail. Dont get in a hurry to get places, and learn how to run it safely. Be careful and wear your kill switch and life jacket. And dont go in big water, ever, with that thing.
Enjoy it, itll be a good rig. Just know it has some limitations and you'll have a lot of fun.
#CFFITR #GhostBoat #Whoneedsphysicsihaveamudmotor
|
Wed Nov 27, 2019 10:03 pm |
|
|
Obxmm
MMT Member
Joined: Fri Nov 22, 2019 2:49 pm Posts: 5
|
Re: Which boat Jon boat or wood skiff
Thanks for responses. I’m leaning towards the wood because I think it would be safer. Little wider and taller sides. Anyone ever had a mm on a wooden skiff? Thanks fellas.
|
Thu Nov 28, 2019 5:49 am |
|
|
Obxmm
MMT Member
Joined: Fri Nov 22, 2019 2:49 pm Posts: 5
|
Re: Which boat Jon boat or wood skiff
Decided on wooden skiff. Found a little rot. Gonna repair hopefully next week. Boat is heavier than I remember easily 350 lbs I guess. Any ideas on speed? How should she handle? Thanks
You do not have the required permissions to view the files attached to this post.
|
Sat Nov 30, 2019 3:51 pm |
|
|
Obxmm
MMT Member
Joined: Fri Nov 22, 2019 2:49 pm Posts: 5
|
Re: Which boat Jon boat or wood skiff
Making progress. Fixed rot, working on painting. Motor is ready to install next. Any guesses on top speed. Anyone with mud motor on wooden skiff? Thanks
You do not have the required permissions to view the files attached to this post.
|
Tue Dec 10, 2019 4:03 pm |
|
|
AWall3322
MMT Pro Member
Joined: Fri Feb 15, 2019 7:58 am Posts: 51
|
Re: Which boat Jon boat or wood skiff
This is the boat I built. Fiberglass over wood. I run a 13 longtail that I built as well. Not a speed demon by any means but it’ll goes in the shallow dang good. The frogs, fish ducks and deer are all feeling it’s effects this year
Sent from my iPhone using Tapatalk
|
Tue Dec 10, 2019 5:34 pm |
|
|
Obxmm
MMT Member
Joined: Fri Nov 22, 2019 2:49 pm Posts: 5
|
Re: Which boat Jon boat or wood skiff
Almost ready for the water. How it is now I can not rotate prop end all the way around into the boat. I can raise it slightly with the mount(it might not be enough to get over sides). I was concerned raising it up would affect strength and or performance. Is that true? Also what are reasons for wanting to swing motor all the way around. Thanks.
You do not have the required permissions to view the files attached to this post.
|
Wed Jan 01, 2020 3:42 pm |
|
|
Russ
MMT 1000 Club
Joined: Mon Dec 31, 2012 11:07 pm Posts: 4820 Location: West Monroe, LA
|
Re: Which boat Jon boat or wood skiff
So you dont have a 6 ft bumper attractant sticking out behind your boat. Get a flag for it.
#CFFITR #GhostBoat #Whoneedsphysicsihaveamudmotor
|
Wed Jan 01, 2020 4:32 pm |
|
|
Bigbend
MMT Pro Member
Joined: Sat Dec 11, 2010 6:25 am Posts: 493 Location: SWGA
|
Re: Which boat Jon boat or wood skiff
Get a flag for it. If you shim it up to be able to swing into the boat, it will affect performance by changing where the prop is running. If you only needed like an inch, or something small to clear the corner of the boat it might be worth it. A small change like that could probably be corrected with messing with the cavitation plate. If it’s running really good now I’d leave it alone.
|
Thu Jan 02, 2020 2:57 am |
|
|
|