Nice !!!!
| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| Fiberglass inboard http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=7&t=38818 |
Page 1 of 4 |
| Author: | forever draggin [ Mon Mar 18, 2013 12:00 pm ] |
| Post subject: | Fiberglass inboard |
I picked up a mold for cheap so decided to build me another inboard. I always preferred a glass boat ImageUploadedByTapatalk 21363629527.597791.jpgImageUploadedByTapatalk 21363629568.484024.jpgImageUploadedByTapatalk 21363629599.798534.jpg Sprayed my gelcoat |
|
| Author: | Old School [ Mon Mar 18, 2013 12:02 pm ] |
| Post subject: | Re: Fiberglass inboard |
Nice looking boat, put u a GTR on there |
|
| Author: | forever draggin [ Mon Mar 18, 2013 12:05 pm ] |
| Post subject: | Re: Fiberglass inboard |
ImageUploadedByTapatalk 21363629851.246790.jpgskin coat ImageUploadedByTapatalk 21363629898.075185.jpgsome stitchmat ImageUploadedByTapatalk 21363629941.447607.jpgsanded for the next few layers |
|
| Author: | forever draggin [ Mon Mar 18, 2013 12:09 pm ] |
| Post subject: | Re: Fiberglass inboard |
ImageUploadedByTapatalk 21363630016.929901.jpgmore stitchmat ImageUploadedByTapatalk 21363630096.178690.jpg Runners cut and glued in ImageUploadedByTapatalk 21363630140.575685.jpgmade a mold for the front deck and glassed |
|
| Author: | forever draggin [ Mon Mar 18, 2013 12:12 pm ] |
| Post subject: | Re: Fiberglass inboard |
ImageUploadedByTapatalk 21363630213.079464.jpglittle reinforcement ImageUploadedByTapatalk 21363630256.682472.jpg ImageUploadedByTapatalk 21363630309.269660.jpgpopped the deck off of the mold and glassed it in once cut to fit |
|
| Author: | forever draggin [ Mon Mar 18, 2013 12:17 pm ] |
| Post subject: | Re: Fiberglass inboard |
ImageUploadedByTapatalk 21363630453.467855.jpgmade and glassed the backbone for the front deck ImageUploadedByTapatalk 21363630557.625012.jpgfloated her out the mold ImageUploadedByTapatalk 21363630624.321879.jpg |
|
| Author: | forever draggin [ Mon Mar 18, 2013 12:24 pm ] |
| Post subject: | Re: Fiberglass inboard |
ImageUploadedByTapatalk 21363630802.142132.jpg Motor clutch and bell housing ImageUploadedByTapatalk 21363630869.359789.jpg Through hull and rudder port ImageUploadedByTapatalk 21363631070.325161.jpg And a skid I built for everything to sit on. |
|
| Author: | forever draggin [ Mon Mar 18, 2013 12:28 pm ] |
| Post subject: | Re: Fiberglass inboard |
ImageUploadedByTapatalk 21363631150.135528.jpgsetting the motor in so I can see where to stop the false floor and gonna make some motor mounts ImageUploadedByTapatalk 21363631226.958928.jpg Walaa Then I glassed a sheet of plywood to get my floor, separated the glass from the wood and cut it to fit for my floorImageUploadedByTapatalk 21363631340.893737.jpg |
|
| Author: | forever draggin [ Mon Mar 18, 2013 12:34 pm ] |
| Post subject: | Re: Fiberglass inboard |
ImageUploadedByTapatalk 21363631403.712145.jpg3m5200ed to the top of the runners and glassed her on in ImageUploadedByTapatalk 21363631481.347117.jpg Built a form for my passenger seat ImageUploadedByTapatalk 21363631599.789785.jpgpryed it off the wood, made my hatch gutters, and glassed some gutters n on the floor and some PVC into the sides that I ripped to run wires to the front |
|
| Author: | swamprat26 [ Mon Mar 18, 2013 12:35 pm ] |
| Post subject: | Re: Fiberglass inboard |
Nice job. Sent from my iPhone using Tapatalk |
|
| Author: | craig [ Mon Mar 18, 2013 12:37 pm ] |
| Post subject: | Re: Fiberglass inboard |
Looks good dic. |
|
| Author: | forever draggin [ Mon Mar 18, 2013 12:37 pm ] |
| Post subject: | Re: Fiberglass inboard |
ImageUploadedByTapatalk 21363631726.254818.jpg ImageUploadedByTapatalk 21363631778.723570.jpg Motor back in ImageUploadedByTapatalk 21363631837.662694.jpgand the start of a motor cover/ass holder |
|
| Author: | forever draggin [ Mon Mar 18, 2013 12:49 pm ] |
| Post subject: | Re: Fiberglass inboard |
ImageUploadedByTapatalk 21363632447.094413.jpgImageUploadedByTapatalk 21363632499.384051.jpgImageUploadedByTapatalk 21363632548.314672.jpg |
|
| Author: | forever draggin [ Mon Mar 18, 2013 12:54 pm ] |
| Post subject: | Re: Fiberglass inboard |
ImageUploadedByTapatalk 21363632623.797113.jpg A Lil expanded metal ImageUploadedByTapatalk 21363632748.874689.jpg A shifter a new seat and a beer holder ImageUploadedByTapatalk 21363632863.368396.jpgnow..where to put this? Hood ornament? Maybe..maybe not |
|
| Author: | Jamie B. [ Mon Mar 18, 2013 12:58 pm ] |
| Post subject: | Re: Fiberglass inboard |
This is a very nice project you have going, great job. That hull looks familar, is that the old Midnight Hull out of Lockport? |
|
| Author: | bayouboy [ Mon Mar 18, 2013 1:02 pm ] |
| Post subject: | Re: Fiberglass inboard |
That is Bad Ass! Nice work! |
|
| Author: | Jamie B. [ Mon Mar 18, 2013 1:07 pm ] |
| Post subject: | Re: Fiberglass inboard |
Take that skull head off of the shifter they break very easy, and hurt the hell out of your hand after.LOL. I would drill and tap the duck head for a shifter. |
|
| Author: | tchauvin [ Mon Mar 18, 2013 1:10 pm ] |
| Post subject: | Re: Fiberglass inboard |
Very nice,,,that will be a froggin machine!! |
|
| Author: | BROOKS [ Mon Mar 18, 2013 1:13 pm ] |
| Post subject: | Re: Fiberglass inboard |
Nice !!!!
|
|
| Author: | forever draggin [ Mon Mar 18, 2013 1:20 pm ] |
| Post subject: | Re: Fiberglass inboard |
Jamie Lester griffin said the hull comes from raceland, Mathews r Lockport. I forgot which one. Said the last name started with an s. I would recongnize if u said it. Simoneaux maybe??? As far as the duck head it ended up being drilled tapped and on my steering |
|
| Author: | forever draggin [ Mon Mar 18, 2013 1:21 pm ] |
| Post subject: | Re: Fiberglass inboard |
Thanx guys for the kind words |
|
| Author: | tchauvin [ Mon Mar 18, 2013 1:25 pm ] |
| Post subject: | Re: Fiberglass inboard |
what size is it? |
|
| Author: | forever draggin [ Mon Mar 18, 2013 1:44 pm ] |
| Post subject: | Re: Fiberglass inboard |
| Author: | forever draggin [ Mon Mar 18, 2013 1:46 pm ] |
| Post subject: | Re: Fiberglass inboard |
| Author: | tchauvin [ Mon Mar 18, 2013 1:47 pm ] |
| Post subject: | Re: Fiberglass inboard |
|
|
| Author: | Jamie B. [ Mon Mar 18, 2013 1:50 pm ] |
| Post subject: | Re: Fiberglass inboard |
It is the old Midnight mold, they are so good running boats. I know what you are talking about with the flare, it opens the hull up big time. |
|
| Author: | Beadlejuicejr [ Mon Mar 18, 2013 1:52 pm ] |
| Post subject: | Re: Fiberglass inboard |
That looks like a lot of work but damn that's badass. Id love to have one of them one day |
|
| Author: | banded-mallard [ Mon Mar 18, 2013 1:55 pm ] |
| Post subject: | Re: Fiberglass inboard |
| Author: | forever draggin [ Mon Mar 18, 2013 2:45 pm ] |
| Post subject: | Re: Fiberglass inboard |
| Author: | Jamie B. [ Mon Mar 18, 2013 2:53 pm ] |
| Post subject: | Re: Fiberglass inboard |
Whats your shaft angle at with that skeg? |
|
| Author: | forever draggin [ Mon Mar 18, 2013 2:54 pm ] |
| Post subject: | Re: Fiberglass inboard |
ImageUploadedByTapatalk 21363639911.075355.jpgImageUploadedByTapatalk 21363639981.057489.jpg This is where the duck ended up. I went with a boomerang steering system as my last boat had an ez glide and I hated it. ImageUploadedByTapatalk 21363640092.394395.jpg My rudder |
|
| Author: | forever draggin [ Mon Mar 18, 2013 2:56 pm ] |
| Post subject: | Re: Fiberglass inboard |
15* |
|
| Author: | forever draggin [ Mon Mar 18, 2013 2:59 pm ] |
| Post subject: | Re: Fiberglass inboard |
ImageUploadedByTapatalk 21363640272.448907.jpg Supports for back deck glued ImageUploadedByTapatalk 21363640318.179030.jpgthen glassed ImageUploadedByTapatalk 21363640357.363422.jpgand the steering |
|
| Author: | Jamie B. [ Mon Mar 18, 2013 3:02 pm ] |
| Post subject: | Re: Fiberglass inboard |
Thats what mine is at. Keep up the good work, I want to here the reviews of this boat running. I had a neighbor that had a hull like this with a Sweet 16 in it straight drive, used to run 48 on GPS and was hell to drive. |
|
| Author: | forever draggin [ Mon Mar 18, 2013 3:03 pm ] |
| Post subject: | Re: Fiberglass inboard |
ImageUploadedByTapatalk 21363640429.444922.jpgImageUploadedByTapatalk 21363640477.638261.jpg I took the easy way out for the back deck. It's hinged. Flips all the way over as a duck cleaning station lol The deck and runners r the only wood involved n this boat ImageUploadedByTapatalk 21363640625.856704.jpgtheass |
|
| Author: | forever draggin [ Mon Mar 18, 2013 3:07 pm ] |
| Post subject: | Re: Fiberglass inboard |
ImageUploadedByTapatalk 21363640721.337946.jpgmade the front lid, need to cut it down so it's flush ImageUploadedByTapatalk 21363640778.678411.jpg Trimming the lid and sides, die grinder exploded! 16 stitches on the inside 11 on the outside ImageUploadedByTapatalk 21363640851.941527.jpgplywoods glasses, hinges built |
|
| Author: | forever draggin [ Mon Mar 18, 2013 3:10 pm ] |
| Post subject: | Re: Fiberglass inboard |
ImageUploadedByTapatalk 21363640929.717273.jpgbetter pics of the steering ImageUploadedByTapatalk 21363640982.144967.jpgImageUploadedByTapatalk 21363641015.199284.jpg |
|
| Author: | forever draggin [ Mon Mar 18, 2013 3:12 pm ] |
| Post subject: | Re: Fiberglass inboard |
ImageUploadedByTapatalk 21363641078.612671.jpgdrake watching me work ImageUploadedByTapatalk 21363641114.248181.jpgmotor out ImageUploadedByTapatalk 21363641147.692077.jpgmymold for pass lid |
|
| Author: | forever draggin [ Mon Mar 18, 2013 3:14 pm ] |
| Post subject: | Re: Fiberglass inboard |
ImageUploadedByTapatalk 21363641195.033361.jpgtorn apart and ready for gel coat Ill give y'all time before I post the gel coated pics |
|
| Author: | forever draggin [ Mon Mar 18, 2013 3:32 pm ] |
| Post subject: | Re: Fiberglass inboard |
| Page 1 of 4 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|