|
|
FAQ
• Login
|
|
It is currently Fri Jun 20, 2025 3:26 pm
|
|
Page 1 of 1
|
[ 8 posts ] |
|
How engage 4x4 in old gmc
| Author |
Message |
|
benelli08
MMT F.E.
Joined: Wed Aug 29, 2012 3:42 pm
Posts: 763
|
 How engage 4x4 in old gmc I bought a old 1983 gmc as a work/play truck and my 95 z71 wasant like this this one you gota move it down and over and then down again do t wanna mess it up know it makes me look like a dumbass but I already put some money into this truck don't wanna drop more because I don't wanna look stupid and ask a question and end up messing it up so which is 4 high
You do not have the required permissions to view the files attached to this post.
_________________
2010 gtr cdi with a stage 2 pushing a 18x46 home made HEAVY DUTY boat
|
| Tue Feb 18, 2014 4:07 pm |
|
|
|
Howdy
MMT Pro Member
Joined: Tue Jan 17, 2012 9:50 am
Posts: 359
|
Re: How engage 4x4 in old gmc Put truck in neutral and pull 4x4 shifter back until shifter stops that should be 4 high, pull over to the right and back all the way and that should be 4 low. The N is for neutral on the transfer case and it doesn't matter what gear your transmission is in if you put the transfer case in neutral it will not pull at all
_________________
''It's just 90 foot you're gonna die if you fall 20 foot so whats another 70 foot'' Jason Humble climbing school 12'
|
| Tue Feb 18, 2014 4:12 pm |
|
|
|
benelli08
MMT F.E.
Joined: Wed Aug 29, 2012 3:42 pm
Posts: 763
|
Re: How engage 4x4 in old gmc I knew what the N was for and the 4L but by the 4 high it has a dot on both sides so I wasant sure and you gota get out and lock the hubs and thanx it'll be hard to test it cause it has some 37 boggers on it only place ima spin thoes to test it is in some serious mud
_________________
2010 gtr cdi with a stage 2 pushing a 18x46 home made HEAVY DUTY boat
|
| Tue Feb 18, 2014 4:17 pm |
|
|
|
baron von
MMT 1000 Club
Joined: Tue Jan 21, 2014 2:52 pm
Posts: 2806
Location: Minnesota
|
Re: How engage 4x4 in old gmc the other dash (right side ) is shift gate
_________________
that's going itch when it dries
|
| Tue Feb 18, 2014 4:19 pm |
|
|
|
benelli08
MMT F.E.
Joined: Wed Aug 29, 2012 3:42 pm
Posts: 763
|
Re: How engage 4x4 in old gmc
_________________
2010 gtr cdi with a stage 2 pushing a 18x46 home made HEAVY DUTY boat
|
| Tue Feb 18, 2014 4:23 pm |
|
|
|
baron von
MMT 1000 Club
Joined: Tue Jan 21, 2014 2:52 pm
Posts: 2806
Location: Minnesota
|
Re: How engage 4x4 in old gmc movement of shifter that allows you to select gears - thru shift gate. do you have manual hubs, they seemed to work best in these
_________________
that's going itch when it dries
|
| Tue Feb 18, 2014 4:29 pm |
|
|
|
benelli08
MMT F.E.
Joined: Wed Aug 29, 2012 3:42 pm
Posts: 763
|
Re: How engage 4x4 in old gmc And you gota back up and go forward for it to engage it ??
my old 95 was like that so I'm Sure this one is like that but this one don't have a light or anything to show you it's in 4x4 so it's all just a guess i know you don't wanna be in it when it goes to kick in
_________________
2010 gtr cdi with a stage 2 pushing a 18x46 home made HEAVY DUTY boat
|
| Tue Feb 18, 2014 4:31 pm |
|
|
|
benelli08
MMT F.E.
Joined: Wed Aug 29, 2012 3:42 pm
Posts: 763
|
Re: How engage 4x4 in old gmc Yea I gota get out and lock the hubs
_________________
2010 gtr cdi with a stage 2 pushing a 18x46 home made HEAVY DUTY boat
|
| Tue Feb 18, 2014 4:31 pm |
|
|
|
|
|
Page 1 of 1
|
[ 8 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 171 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
