| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| How engage 4x4 in old gmc http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=7&t=50541 |
Page 1 of 1 |
| Author: | benelli08 [ Tue Feb 18, 2014 4:07 pm ] |
| Post subject: | How engage 4x4 in old gmc |
I bought a old 1983 gmc as a work/play truck and my 95 z71 wasant like this this one you gota move it down and over and then down again do t wanna mess it up know it makes me look like a dumbass but I already put some money into this truck don't wanna drop more because I don't wanna look stupid and ask a question and end up messing it up so which is 4 high |
|
| Author: | Howdy [ Tue Feb 18, 2014 4:12 pm ] |
| Post subject: | Re: How engage 4x4 in old gmc |
Put truck in neutral and pull 4x4 shifter back until shifter stops that should be 4 high, pull over to the right and back all the way and that should be 4 low. The N is for neutral on the transfer case and it doesn't matter what gear your transmission is in if you put the transfer case in neutral it will not pull at all |
|
| Author: | benelli08 [ Tue Feb 18, 2014 4:17 pm ] |
| Post subject: | Re: How engage 4x4 in old gmc |
I knew what the N was for and the 4L but by the 4 high it has a dot on both sides so I wasant sure and you gota get out and lock the hubs and thanx it'll be hard to test it cause it has some 37 boggers on it only place ima spin thoes to test it is in some serious mud |
|
| Author: | baron von [ Tue Feb 18, 2014 4:19 pm ] |
| Post subject: | Re: How engage 4x4 in old gmc |
the other dash (right side ) is shift gate |
|
| Author: | benelli08 [ Tue Feb 18, 2014 4:23 pm ] |
| Post subject: | Re: How engage 4x4 in old gmc |
| Author: | baron von [ Tue Feb 18, 2014 4:29 pm ] |
| Post subject: | Re: How engage 4x4 in old gmc |
movement of shifter that allows you to select gears - thru shift gate. do you have manual hubs, they seemed to work best in these |
|
| Author: | benelli08 [ Tue Feb 18, 2014 4:31 pm ] |
| Post subject: | Re: How engage 4x4 in old gmc |
And you gota back up and go forward for it to engage it ?? my old 95 was like that so I'm Sure this one is like that but this one don't have a light or anything to show you it's in 4x4 so it's all just a guess i know you don't wanna be in it when it goes to kick in |
|
| Author: | benelli08 [ Tue Feb 18, 2014 4:31 pm ] |
| Post subject: | Re: How engage 4x4 in old gmc |
Yea I gota get out and lock the hubs |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|