It is currently Mon Jul 14, 2025 8:48 pm




Reply to topic  [ 11 posts ] 
 Hot rods  
Author Message
MMT 1000 Club

Joined: Wed Jan 18, 2012 7:21 pm
Posts: 2207
Location: North Alabama
Post Hot rods
So I've been wanting a hot rod for a while, that's main purpose is pavement pounding. I say this because my boat sees more land than it should. Just wanted to see what yall got. Me I've been wanting a fox body mustang forever, but can't find one for cheap enough. After long looking I found a 95 mustang ordered gts black 5.0 t5 car, but guy thought it was a 96 with motor transplant. Ending up getting a hell of a deal. Had to replace a window controller on driver side, new locks, and a lot of cleaning. Then buffed it today and it coming along. It is a 5.0 gt40 heads, gt40 upper and lower intake, e303, headers, 373 gears, short throw, and a bunch more. Car came with all receipts too. It's basically a hopped up cobra clone, although I hate the hood.

_________________
2014 PRODIGY 1754 (#19) 2014 5500 BAMF HDR RETRO SOLD

2010 Gator Tail Gator Series 18x54 pushed by a 2020 40GTRXD


Thu Jul 23, 2015 5:14 pm
Profile
MMT 1000 Club

Joined: Sun Sep 01, 2013 2:53 pm
Posts: 3480
Location: Hardin County, Tx
Post Re: Hot rods
I really want a notch back Fox to put the motor setup out of my truck in. I've never fallen in love with that SN95 body style but the fox has always caught my eye. Tons and tons of suspension for them too. Whatever I end up building, it won't be Ford powered.

_________________
#CFFITR

-Custom pool noodle
-stage 4 water wings


Thu Jul 23, 2015 5:41 pm
Profile
MMT 1000 Club

Joined: Wed Jan 18, 2012 7:21 pm
Posts: 2207
Location: North Alabama
Post Re: Hot rods
I hear ya on the fox, but to me I would have to have a notch. No way I would roll hatch, just hate them. The thing about the sn95, now you sway the suspension. The 03 cobra iws is a swap, and plan on going to manual front rack.

_________________
2014 PRODIGY 1754 (#19) 2014 5500 BAMF HDR RETRO SOLD

2010 Gator Tail Gator Series 18x54 pushed by a 2020 40GTRXD


Thu Jul 23, 2015 5:52 pm
Profile
MMT 1000 Club

Joined: Sun Sep 01, 2013 2:53 pm
Posts: 3480
Location: Hardin County, Tx
Post Re: Hot rods
There's good stuff out for the SN's too. Looks it cleaned up pretty good.

_________________
#CFFITR

-Custom pool noodle
-stage 4 water wings


Thu Jul 23, 2015 7:09 pm
Profile
MMT 1000 Club

Joined: Wed Jan 18, 2012 7:21 pm
Posts: 2207
Location: North Alabama
Post Re: Hot rods
The push rod motors are simple and cheap, that 4.6 is expensive

_________________
2014 PRODIGY 1754 (#19) 2014 5500 BAMF HDR RETRO SOLD

2010 Gator Tail Gator Series 18x54 pushed by a 2020 40GTRXD


Thu Jul 23, 2015 7:48 pm
Profile
MMT 1000 Club

Joined: Sun Sep 01, 2013 2:53 pm
Posts: 3480
Location: Hardin County, Tx
Post Re: Hot rods
Yeah. I've never been impressed with the Hp/$ ratio on a mod motor. I've messed with GM LS stuff since about 2002. There's so much that can be done with bone stock parts it's ridiculous. I've built and tuned more than one stock bottom end setup that approached the 1000rwhp mark. They love boost and can take some real abuse with proper tuning. No matter what I end up doing It will be getting an LS based powerplant.

_________________
#CFFITR

-Custom pool noodle
-stage 4 water wings


Thu Jul 23, 2015 8:58 pm
Profile
MMT 1000 Club
User avatar

Joined: Wed Jan 14, 2009 8:18 pm
Posts: 4915
Location: Lake Jackson, TX
Post Re: Hot rods
Nice man. I miss my ol girl. 96 triple black cobra. Sold her 3 years ago with 14k original miles.



_________________
37 PD EFI FPR 18x48 Tiller
SOLD -- 36 PD EFI FPR 18x48 Stick Steer
SOLD -- 27 PD FPR 16x36 Skiff


Thu Jul 23, 2015 10:29 pm
Profile
MMT 1000 Club
User avatar

Joined: Wed Jan 14, 2009 8:18 pm
Posts: 4915
Location: Lake Jackson, TX
Post Re: Hot rods
I also dropped some 315s on the back.

_________________
37 PD EFI FPR 18x48 Tiller
SOLD -- 36 PD EFI FPR 18x48 Stick Steer
SOLD -- 27 PD FPR 16x36 Skiff


Thu Jul 23, 2015 10:38 pm
Profile
MMT 1000 Club
User avatar

Joined: Tue Jan 13, 2009 6:42 pm
Posts: 2377
Location: West Coast Wisconsin
Post Re: Hot rods
Nice looking ride. My son sold his 02 Mach 1 a few years back , so as to buy an F150 ecoboost. He bought the car while stationed at Ft.Hood from a local speed shop owner, with 375 to the ground it didn't like Wisconsin winters.


Fri Jul 24, 2015 3:03 am
Profile
MMT 1000 Club

Joined: Wed Jan 18, 2012 7:21 pm
Posts: 2207
Location: North Alabama
Post Re: Hot rods
That was a good looking cobra JLACOUR, and only 14 k miles.
Mitch I bet it didn't like the snow, they are a handful in the rain too.

_________________
2014 PRODIGY 1754 (#19) 2014 5500 BAMF HDR RETRO SOLD

2010 Gator Tail Gator Series 18x54 pushed by a 2020 40GTRXD


Fri Jul 24, 2015 9:52 am
Profile
MMT 1000 Club

Joined: Wed Jan 18, 2012 7:21 pm
Posts: 2207
Location: North Alabama
Post Re: Hot rods
Had a nasty mess in the center console compartment, tried to get all the glue out, left plastic looking bad. I also hate rattling and I had some extra turf.

_________________
2014 PRODIGY 1754 (#19) 2014 5500 BAMF HDR RETRO SOLD

2010 Gator Tail Gator Series 18x54 pushed by a 2020 40GTRXD


Fri Jul 31, 2015 10:09 am
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 11 posts ] 

Who is online

Users browsing this forum: No registered users and 85 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: