Author |
Message |
take'emgator
MMT Super Elite Member
Joined: Mon Oct 19, 2009 6:38 pm Posts: 10201 Location: SETX
|
 It is now 2016!
Any of you guys realize how long you've been in the game here on MMT? Look at your join date, i've been a part of this site for 8 years. still going strong, seen alot of people come and go! don't post near as much as i use too but i read alot and still got some good stuff going on.
|
Mon Feb 22, 2016 12:22 am |
|
 |
btmannin
MMT 1000 Club
Joined: Tue Jan 15, 2013 5:25 pm Posts: 1723 Location: Oxford/Jackson ms
|
 Re: It is now 2016!
Started in November 2010 when I had a question about my godevil. a few years later I decided to log back on and couldn't remember my password so now I've got this name.. Still own the same godevil that brought me here and still see some of the same folks that helped me out when I joined. There were some good dudes on here that don't come around anymore, though.
_________________ 1436 tin can shoved by a 16 GDLT 16.5x48 running like hell from a built 40 merc
Well they call me king turd up here on shit mountain, but if you want it you can have the crown.
|
Mon Feb 22, 2016 12:45 am |
|
 |
robertb4wd
MMT 1000 Club
Joined: Sat Jul 18, 2009 7:18 pm Posts: 1501 Location: Bridge City, Texas
|
 Re: It is now 2016!
I didn't think I was on here before you take'em...
_________________ 1754 Gatortail Extreme / 35 GTR
|
Mon Feb 22, 2016 1:09 am |
|
 |
ibfishin
MMT 1000 Club
Joined: Sun Dec 05, 2010 8:20 pm Posts: 1127 Location: Okeechobee, FL
|
 Re: It is now 2016!
Not sure where to find the "join date", but I've been here since 2010 when I started my research for a new boat.
Sent from my SM-G920V using Tapatalk
_________________ 35 GTR pushing an 18' Alumitech Custom
|
Mon Feb 22, 2016 6:30 am |
|
 |
BlueShamu
MMT Elite Member
Joined: Mon Feb 06, 2012 6:13 pm Posts: 5605 Location: D'town, LA
|
 Re: It is now 2016!
|
Mon Feb 22, 2016 7:15 am |
|
 |
BlueShamu
MMT Elite Member
Joined: Mon Feb 06, 2012 6:13 pm Posts: 5605 Location: D'town, LA
|
 Re: It is now 2016!
I'm still fresh meat in comparison....2/5/2012
Sent from my iPhone using Tapatalk
|
Mon Feb 22, 2016 7:16 am |
|
 |
DENNYEDWARDS
MMT Addict
Joined: Sun Aug 09, 2009 12:50 pm Posts: 574 Location: Muscatine, Iowa
|
 Re: It is now 2016!
Joined in Aug 2009 was on the MB forum longer. First motor was a GD 9 hp LT. Still running Tin can riveted Jon boats, with know regrets.
|
Mon Feb 22, 2016 8:19 am |
|
 |
CLICKSTER
MMT 1000 Club
Joined: Sat Feb 12, 2011 4:08 pm Posts: 1552
|
 Re: It is now 2016!
im a young one. lol
|
Mon Feb 22, 2016 8:20 am |
|
 |
North LA Hunter
MMT Elite Member
Joined: Mon Aug 02, 2010 8:39 pm Posts: 6976 Location: West Monroe, LA
|
 Re: It is now 2016!
Been here a lil while.
But where is the "original 50" at??
Not many of them get on here a lot.
Sent from my beeper
|
Mon Feb 22, 2016 8:43 am |
|
 |
Gigafowl
MMT Elite Member
Joined: Tue Jan 13, 2009 7:19 pm Posts: 6441 Location: Trinity Bay - Texas
|
 Re: It is now 2016!
_________________ Eat - Sleep - Hunt ! ! !
"It is good to have an end to journey toward; but it is the journey that matters, in the end."
|
Mon Feb 22, 2016 9:12 am |
|
 |
North LA Hunter
MMT Elite Member
Joined: Mon Aug 02, 2010 8:39 pm Posts: 6976 Location: West Monroe, LA
|
 Re: It is now 2016!
|
Mon Feb 22, 2016 9:31 am |
|
 |
WestEndAngler
MMT Moderator
Joined: Thu Mar 05, 2009 9:11 am Posts: 9143 Location: Houston | Surfside
|
 Re: It is now 2016!
_________________ GTB 1860 w/ 2019 GTR40XD-HO
|
Mon Feb 22, 2016 10:11 am |
|
 |
ibfishin
MMT 1000 Club
Joined: Sun Dec 05, 2010 8:20 pm Posts: 1127 Location: Okeechobee, FL
|
 Re: It is now 2016!
Thanks Blue.
When was the software switch? I remember having to re-register at some point as well.
Sent from my SM-G920V using Tapatalk
_________________ 35 GTR pushing an 18' Alumitech Custom
|
Mon Feb 22, 2016 10:52 am |
|
 |
Tony B
MMT Site Admin
Joined: Sat Jan 10, 2009 10:10 pm Posts: 2258 Location: Loreauville, LA
|
 Re: It is now 2016!
MMT has been up for 10 years this year in June (including the time when David K started it).
Hard to believe it's been that long!
_________________ Tony Broussard Admin | Owner Admin | Owner Admin | Owner Admin | Owner Admin | Owner CEO | Graphic Details Digital Media
|
Mon Feb 22, 2016 11:36 am |
|
 |
godvl
MMT Pro Member
Joined: Fri Feb 06, 2009 8:36 am Posts: 253 Location: Nac-o-no where, tx
|
 Re: It is now 2016!
Yep I signed up way back when under backwater then had to create a new account in 09.......been lurkin in this place for a long time and probably have the fewest posts
|
Mon Feb 22, 2016 4:43 pm |
|
 |
BayouStateHunter
MMT 1000 Club
Joined: Sat May 16, 2009 1:04 pm Posts: 2037 Location: On da Northshore -- Louisiana
|
 Re: It is now 2016!
'09 for me I believe. Still in the same and only surface drive rig
_________________ 1860 GTB/35GTR CC w/ Hoyt Stage 1 - bowfishin'/rodnreel/duckhunting
|
Mon Feb 22, 2016 9:11 pm |
|
 |
Mudhole
MMT Addict
Joined: Wed Jan 14, 2009 7:05 am Posts: 716 Location: NW La.
|
 Re: It is now 2016!
A lllooonnnggg time!
Sent from my iPhone using Tapatalk
_________________ "Gofer Everette?"
|
Tue Feb 23, 2016 4:57 am |
|
 |
MaXXis85
MMT Elite Member
Joined: Wed Jan 14, 2009 7:23 am Posts: 6233 Location: Tarkington, TX
|
 Re: It is now 2016!
Been here since the First MMT. I joined in 2007 IIRC on the Old site.
_________________ Bayou Surface Drive 337-351-0362 Tarkington, TX 77327
|
Tue Feb 23, 2016 8:01 am |
|
 |
JLACOUR
MMT 1000 Club
Joined: Wed Jan 14, 2009 8:18 pm Posts: 4915 Location: Lake Jackson, TX
|
 Re: It is now 2016!
Mine says 1/14/09 but I don't remember the previous site.
Sent from my iPhone using Tapatalk
_________________ 37 PD EFI FPR 18x48 Tiller SOLD -- 36 PD EFI FPR 18x48 Stick Steer SOLD -- 27 PD FPR 16x36 Skiff
|
Tue Feb 23, 2016 8:29 am |
|
 |
Frog
MMT Sponsor
Joined: Mon Jun 13, 2011 8:49 am Posts: 3260
|
 Re: It is now 2016!
 seems longer than 5 years, not that it hasn't been fun 
_________________ http://www.gatorglide.com/
gatorheads@comcast.net
|
Tue Feb 23, 2016 8:36 am |
|
 |
guidry21
MMT Pro Member
Joined: Thu Feb 14, 2013 1:33 pm Posts: 338 Location: galliano, la
|
 Re: It is now 2016!
Feb 2013
_________________ 16x48 alweld 35 gtr
|
Thu Feb 25, 2016 10:59 am |
|
 |
Will
MMT Elite Member
Joined: Fri Jul 08, 2011 1:54 pm Posts: 8133
|
 Re: It is now 2016!
Sure has been a lot of good time and good information for the most part. I miss ole fat fingers sometimes. He was good entertainment when I was bored.
_________________ Before the internet, the majority of the village idiots stayed in their villages.
|
Thu Feb 25, 2016 12:46 pm |
|
 |
flatboat
MMT Pro Member
Joined: Sun Mar 08, 2009 7:22 pm Posts: 401
|
 Re: It is now 2016!
Yep I've been peeking in here since the pro boards site....
|
Thu Feb 25, 2016 1:08 pm |
|
 |
Bug
MMT 1000 Club
Joined: Sat Oct 29, 2011 10:28 am Posts: 1068 Location: Tallahassee, Fl
|
 Re: It is now 2016!
Good riddance to several of the punks that've come and gone. There's sure been some entertaining turds pass through too though that I miss their antics...
_________________ PRODRIVE 1860 CC "Let the good times roll" Luck??? The bassards don't stand a chance!
|
Thu Feb 25, 2016 6:18 pm |
|
 |
SCmudder7071
MMT 1000 Club
Joined: Mon Feb 07, 2011 12:10 pm Posts: 3024
|
 Re: It is now 2016!
Feb of 2011. So 5 years for me.
_________________ 1754 Extreme/LAProp Stage 2 GTR
|
Thu Feb 25, 2016 6:59 pm |
|
 |
brickgw
MMT 1000 Club
Joined: Wed Apr 17, 2013 5:15 pm Posts: 2032
|
 Re: It is now 2016!
April 2013 here..just a pup lol
|
Thu Feb 25, 2016 8:47 pm |
|
 |
NannySlayer
MMT Pro Member
Joined: Sun Feb 03, 2013 11:49 pm Posts: 456 Location: S.C.
|
 Re: It is now 2016!
Cannot be too long...
3 years 10 days
_________________ 17/54 gator Trax 35 mudbuddy... mostly stock
|
Thu Feb 25, 2016 11:24 pm |
|
 |
JIMMY W
MMT 1000 Club
Joined: Tue Jan 13, 2009 8:02 pm Posts: 4534 Location: South Louisiana
|
 Re: It is now 2016!
_________________ 17/54 GT EXTREME Center Console, Huntdeck w/ GTR 35
Hoyt Mods and some other goodies
|
Fri Feb 26, 2016 6:09 am |
|
 |
JIMMY W
MMT 1000 Club
Joined: Tue Jan 13, 2009 8:02 pm Posts: 4534 Location: South Louisiana
|
 Re: It is now 2016!
_________________ 17/54 GT EXTREME Center Console, Huntdeck w/ GTR 35
Hoyt Mods and some other goodies
|
Fri Feb 26, 2016 6:10 am |
|
 |
take'emgator
MMT Super Elite Member
Joined: Mon Oct 19, 2009 6:38 pm Posts: 10201 Location: SETX
|
 Re: It is now 2016!
|
Fri Feb 26, 2016 4:42 pm |
|
 |
netman
MMT 1000 Club
Joined: Wed Jan 14, 2009 3:48 pm Posts: 2363 Location: Chandler,Indiana
|
 Re: It is now 2016!
2005 for me. I joined up asking questions and bought the gdsd I still run shortly after joining.
_________________ I got a shotgun,rifle and a Go Devil Surface Drive a country boy can survive. 35+hp GDSD engine mods by George Merta 18x48 GDSD boat
|
Fri Feb 26, 2016 5:43 pm |
|
 |
med
MMT Elite Member
Joined: Wed Jan 14, 2009 8:25 am Posts: 6432 Location: the dark side of the moon
|
 Re: It is now 2016!
TonyB can you still open up the old board like you've done b4? There was some good stuff there.
_________________ 1850 & 36pd
|
Fri Feb 26, 2016 6:05 pm |
|
 |
Tony B
MMT Site Admin
Joined: Sat Jan 10, 2009 10:10 pm Posts: 2258 Location: Loreauville, LA
|
 Re: It is now 2016!
_________________ Tony Broussard Admin | Owner Admin | Owner Admin | Owner Admin | Owner Admin | Owner CEO | Graphic Details Digital Media
|
Fri Feb 26, 2016 6:11 pm |
|
 |
Will
MMT Elite Member
Joined: Fri Jul 08, 2011 1:54 pm Posts: 8133
|
 Re: It is now 2016!
Wasn't there a server change or something a few years back that made it where you can't search before the new one?
_________________ Before the internet, the majority of the village idiots stayed in their villages.
|
Fri Feb 26, 2016 6:14 pm |
|
 |
cb5331
MMT Super Elite Member
Joined: Fri Dec 18, 2009 8:10 pm Posts: 16915 Location: Rowlett, TX
|
 Re: It is now 2016!
Yes. Search doesnt pull up anything more than a year or two old, whenever the server change was. It's still there, just doesn't come up with the site search feature. You can find it if you are just browsing forums, or if you use google.
|
Fri Feb 26, 2016 6:20 pm |
|
 |
|