Seems like I have not heard of as many shortblock failures lately. Maybe the newer wet gasket motors are hangin out. I bet that turbo is turned down. You could prob turn it up to rod slinger easy
| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| PPW http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=7&t=67856 |
Page 1 of 1 |
| Author: | BERNIE255 [ Fri Aug 12, 2016 5:59 pm ] |
| Post subject: | PPW |
Anyone saw the PPW turbo for the 37 vanguard? Produces 53hp on a dino. Isn't that in the ballpark or less of what delta offers? Sent from my iPhone using Tapatalk |
|
| Author: | Russ [ Fri Aug 12, 2016 7:14 pm ] |
| Post subject: | Re: PPW |
Not sure. I will toss this out for discussion. Since briggs gonna Briggs, do you want a turbo slapped on it for that power, or do you want the issues resolved while building that power. Either opinion is fine, just making discussion. |
|
| Author: | Will C [ Fri Aug 12, 2016 7:19 pm ] |
| Post subject: | Re: PPW |
Isn't their level 3 still a stock shortblock? |
|
| Author: | TPerkins [ Fri Aug 12, 2016 7:52 pm ] |
| Post subject: | Re: PPW |
Yes, delta level 3 = Heads, cam, exhaust, dyno tune Sent from my SM-G920V using Tapatalk |
|
| Author: | North LA Hunter [ Fri Aug 12, 2016 8:29 pm ] |
| Post subject: | Re: PPW |
Wonder what boost they running? Wouldn't think a Briggs block could handle that for too long. Sent from my beeper |
|
| Author: | Will C [ Fri Aug 12, 2016 9:40 pm ] |
| Post subject: | Re: PPW |
Seems like I have not heard of as many shortblock failures lately. Maybe the newer wet gasket motors are hangin out. I bet that turbo is turned down. You could prob turn it up to rod slinger easy
|
|
| Author: | tylerduckman [ Sat Aug 13, 2016 11:15 am ] |
| Post subject: | Re: PPW |
It's making 53HP at 5040 RPM's . This looks great on paper but making power at 5040 wouldn't do may any good. Sent from my iPhone using Tapatalk |
|
| Author: | BlueShamu [ Sat Aug 13, 2016 3:41 pm ] |
| Post subject: | Re: PPW |
Yeah....who wants to spin a Briggs >5000....I suppose there's probably a point where it won't spin that because something's gonna give...somewhere....and sooner than later is my guess. |
|
| Author: | TPerkins [ Sat Aug 13, 2016 4:37 pm ] |
| Post subject: | Re: PPW |
I'll take this.. Sent from my SM-G920V using Tapatalk |
|
| Author: | BERNIE255 [ Sat Aug 13, 2016 6:13 pm ] |
| Post subject: | Re: PPW |
What about adding the turbo to a level 3 delta? Sent from my iPhone using Tapatalk |
|
| Author: | BERNIE255 [ Sat Aug 13, 2016 6:24 pm ] |
| Post subject: | Re: PPW |
What about adding the turbo to a level 3 delta? Sent from my iPhone using Tapatalk |
|
| Author: | Will C [ Sat Aug 13, 2016 9:04 pm ] |
| Post subject: | Re: PPW |
| Author: | BERNIE255 [ Sat Aug 13, 2016 9:11 pm ] |
| Post subject: | Re: PPW |
Lol just put some jb weld Sent from my iPhone using Tapatalk |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|