It is currently Thu Nov 14, 2019 7:46 am




Reply to topic  [ 21 posts ] 
 skull mount 
Author Message
MMT Sponsor

Joined: Tue May 24, 2011 6:43 am
Posts: 1604
Post skull mount
Has anyone in here done a skull mount and have any advice? I shot a decent swamp deer last week and thinking about doing a skull mount. I watched a couple you tube videos and other than "cooking" it for an entire day, it doesnt look too difficult.




Attachment:
buck 3.jpg


Attachment:
buck.jpg


You do not have the required permissions to view the files attached to this post.


Fri Jan 09, 2015 11:10 am
Profile
Online
MMT 1000 Club
User avatar

Joined: Wed Jan 14, 2009 8:18 pm
Posts: 4913
Location: Lake Jackson, TX
Post Re: skull mount
Nice deer. I've done a couple myself but I have a local guy that charges 80 bucks and does a nice job. The worse part about boiling them is the smell! 9 times out of 10, the nose will break off, but you can super glue it back on. Call a salon to get the commercial bleach. This guy uses a horseshoe for the jaw support.
Image
Image

_________________
37 PD EFI FPR 18x48 Tiller
SOLD -- 36 PD EFI FPR 18x48 Stick Steer
SOLD -- 27 PD FPR 16x36 Skiff


Fri Jan 09, 2015 11:36 am
Profile
MMT 1000 Club

Joined: Sun Sep 01, 2013 2:53 pm
Posts: 3480
Location: Hardin County, Tx
Post Re: skull mount
All my deer are European mounted. I just like the look better. I probably won't ever have a shoulder mount done unless I shoot a freakin moose one day. Lol

Has anyone ever seen a European mounted duck skull? I have seen some done and they're cool as hell. Thinking about taking one to the taxi just to see how it turns out.

_________________
#CFFITR

-Custom pool noodle
-stage 4 water wings


Sat Jan 24, 2015 8:34 pm
Profile
MMT 1000 Club

Joined: Thu May 23, 2013 4:24 pm
Posts: 2707
Location: Thibodaux, La
Post Re: skull mount
BoatDR wrote:
Has anyone in here done a skull mount and have any advice? I shot a decent swamp deer last week and thinking about doing a skull mount. I watched a couple you tube videos and other than "cooking" it for an entire day, it doesnt look too difficult.




Attachment:
buck 3.jpg


Attachment:
buck.jpg

Congrats on your kill!!!!!!!!!
I do all of my European mounts myself. I remove the hair and some meat. After removing that I boil it in a crawfish pot for a while until the remaining meat is loose. I then hit it with a pressure washer remove the rest of the meat. Just be careful around the nose. You can let the bone dry over time or you can use a form of acid to dry it out well. At this point you can use an industrial bleach cleaning solution and bleach the bone the way you want. I used a bone colored spray paint on a 7 point I killed last year. That looks great as well.

_________________
1850 Predator Series Stick Steer Option
40HP Gatortail


Sat Jan 24, 2015 8:44 pm
Profile WWW
MMT 1000 Club

Joined: Thu May 23, 2013 4:24 pm
Posts: 2707
Location: Thibodaux, La
Post Re: skull mount
Boil it for about 2 to 2.5 hours then hit it with pressure washer

_________________
1850 Predator Series Stick Steer Option
40HP Gatortail


Sat Jan 24, 2015 8:45 pm
Profile WWW
MMT Pro Member
User avatar

Joined: Mon Dec 15, 2014 10:40 pm
Posts: 370
Location: SE Michigan
Post Re: skull mount
WhoDat88 wrote:
Boil it for about 2 to 2.5 hours then hit it with pressure washer


Ive heard about this being done a lot lately with good success.

Nice buck BoatDR congrats!

J, those horseshoe supports are cool as hell ive never seen that before

_________________
2015 Prodigy 1954 V-Rake w/GTR35 (heads, cam, exhaust, EFI)
Full Review of My Rig Here: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=5&t=62021


Sat Jan 24, 2015 11:30 pm
Profile
Online
MMT 1000 Club
User avatar

Joined: Wed Jan 14, 2009 8:18 pm
Posts: 4913
Location: Lake Jackson, TX
Post Re: skull mount
Thanks mike. Just got back my last bow kill from this season.
Image

_________________
37 PD EFI FPR 18x48 Tiller
SOLD -- 36 PD EFI FPR 18x48 Stick Steer
SOLD -- 27 PD FPR 16x36 Skiff


Sat Jan 24, 2015 11:34 pm
Profile
MMT 1000 Club

Joined: Sat Jun 15, 2013 10:00 am
Posts: 2047
Post Re: skull mount
Stick the head in a 5 gal bucket and fill the bucket up with any piles you dig up, they will get the head spotless

Sent from my SAMSUNG-SM-N900A using Tapatalk

_________________
19x48 MAD MAN CUSTOMS 36PD (stock for now)


Sun Jan 25, 2015 5:28 am
Profile
MMT 1000 Club
User avatar

Joined: Wed Dec 12, 2012 3:12 pm
Posts: 1503
Location: St.Amant,LA
Post Re: skull mount
I've boiled some and I set a couple in ant beds.
If u put them in ant beds be sure to tie them to a tree with a good rope, damn dog or bear got a nice 10-pt I had working.

_________________
16X48 WELDBILT -25GTR EFI-sold
18x48 GTB - 35 GTR

Crown royal pro-staff


Sun Jan 25, 2015 7:53 am
Profile
MMT 1000 Club
User avatar

Joined: Mon Nov 15, 2010 4:50 pm
Posts: 2282
Location: Circumcised, Louisiana
Post Re: skull mount
nice deer Andy! and I did my daughters one like this.
http://masterofskulls.com/

_________________
cupped up wrote:
Nigqers, dean. That's what happened. A whole pile of useless phucking piece of chit nigqers. Most of whom are probably fed by welfare. See the kind of world your beloved democrats are creating? Lovely, isn't it?

That place needs a 24 hour purge like that movie. Let em all kill each other off. Then when that's done, drop a nuke on that shit hole and be done with it. Chocolate city.


2013 1746 gator series wit 35 GTR - JUNK
#3940


Sun Jan 25, 2015 8:08 am
Profile
MMT Sponsor

Joined: Tue May 24, 2011 6:43 am
Posts: 1604
Post Re: skull mount
WhoDat88 wrote:
Boil it for about 2 to 2.5 hours then hit it with pressure washer



Thanks for all the advice. This is basically what I did, although all the videos I saw recomended not to bring the water to a boil, just simmer it. After the first hour and a half, 90% of the meat, eyes, nose, and all around the jaw, basically just fell off. Put it back into the pot (with fresh water) for another hour and after alot of scraping, blasting with the hose, and air compressor, got to where I am now. Still have a few little pieces of meat to get off, but looks like I can finish cleaning the rest of it pretty easy.


Still debating on what kind of bleach/peroxide to use to whiten it up, but here is what it looks like now.

Attachment:
deer.jpg


You do not have the required permissions to view the files attached to this post.


Tue Jan 27, 2015 3:42 pm
Profile
MMT 1000 Club

Joined: Sun Sep 01, 2013 2:53 pm
Posts: 3480
Location: Hardin County, Tx
Post Re: skull mount
Tape up the antlers, get you some bone colored paint mixed and go at it with an air brush until you get the look you want. I wouldn't worry with it with bleach etc.

_________________
#CFFITR

-Custom pool noodle
-stage 4 water wings


Tue Jan 27, 2015 4:09 pm
Profile
MMT Pro Member
User avatar

Joined: Mon Dec 15, 2014 10:40 pm
Posts: 370
Location: SE Michigan
Post Re: skull mount
Looks good man, I like a more natural bone look to painted white. Nice thing is you just finish it to your preference! Nice job

_________________
2015 Prodigy 1954 V-Rake w/GTR35 (heads, cam, exhaust, EFI)
Full Review of My Rig Here: http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=5&t=62021


Tue Jan 27, 2015 4:19 pm
Profile
MMT F.E.
User avatar

Joined: Tue Nov 12, 2013 9:30 am
Posts: 770
Location: EAST ARKANSAS
Post Re: skull mount
Here is one for y'all.


You do not have the required permissions to view the files attached to this post.


Tue Jan 27, 2015 4:30 pm
Profile
MMT 1000 Club

Joined: Thu May 23, 2013 4:24 pm
Posts: 2707
Location: Thibodaux, La
Post Re: skull mount
BoatDR wrote:
WhoDat88 wrote:
Boil it for about 2 to 2.5 hours then hit it with pressure washer



Thanks for all the advice. This is basically what I did, although all the videos I saw recomended not to bring the water to a boil, just simmer it. After the first hour and a half, 90% of the meat, eyes, nose, and all around the jaw, basically just fell off. Put it back into the pot (with fresh water) for another hour and after alot of scraping, blasting with the hose, and air compressor, got to where I am now. Still have a few little pieces of meat to get off, but looks like I can finish cleaning the rest of it pretty easy.


Still debating on what kind of bleach/peroxide to use to whiten it up, but here is what it looks like now.

Attachment:
deer.jpg

He has to be a string industrial brand. Do not let the chemical touch the horns

_________________
1850 Predator Series Stick Steer Option
40HP Gatortail


Tue Jan 27, 2015 4:54 pm
Profile WWW
MMT 1000 Club

Joined: Thu May 23, 2013 4:24 pm
Posts: 2707
Location: Thibodaux, La
Post Re: skull mount
Image the one on the left I used the bone colored paint, the one on the right I used a chemical

_________________
1850 Predator Series Stick Steer Option
40HP Gatortail


Tue Jan 27, 2015 4:56 pm
Profile WWW
MMT 1000 Club

Joined: Thu May 23, 2013 4:24 pm
Posts: 2707
Location: Thibodaux, La
Post Re: skull mount
Image this one is natural bone

_________________
1850 Predator Series Stick Steer Option
40HP Gatortail


Tue Jan 27, 2015 4:58 pm
Profile WWW
MMT Addict

Joined: Wed Feb 18, 2009 9:31 pm
Posts: 582
Location: Meraux, LA
Post Re: skull mount
I do taxidermy on the side and if you want the best possible skull mount you can get then maceration or dermested beetles are your only option. Maceration is basically just rotting all the flesh off in water. I have a big drum wrapped in insulation and 2 fish heaters in it. Take my dogs water bucket water and throw it in and fill the rest with a hose. The dog water introduces bacteria that speeds up the process. Change the water every 3 weeks or so and hose with LOW pressure. repeat until it'l all clean. this way is the absolute best because your sinus on the face and honeycomb in the nose stays intcact and really improves the mount. Next you would have to degrease in a higher temp water/ ammonia mix for a few weeks so it doesnt yellow. Only safe way to whiten is to use peroxide. I use clorixide 40 from a beauty supply store. Make sure if you use this high of a concentration you use glasses cause it will blind you. 3% regular peroxide works just as well just takes more time. Either brush on or soak but make sure the bases dont touch the peroxide. Bleach works really well but deteriorates the bone over time and will become very thin and brittle. Seems like a lot of work but this is the proper way to keep everything where it should be.

_________________
17x54 custom CC with stage 3 GTR.


Sun Feb 01, 2015 2:09 pm
Profile
MMT Member

Joined: Tue Aug 20, 2019 7:06 pm
Posts: 3
Location: Syria
Post skull mount
No, it doesnt slide. As you can see in the video, a significant effort is needed to pull it apart. He flew at speeds up to 90 mph with camera mounted and it didnt move a milimeter.

_________________
croscill caribou bedding


Thu Sep 05, 2019 8:57 am
Profile ICQ YIM WWW
MMT Super Elite Member

Joined: Fri Dec 18, 2009 8:10 pm
Posts: 16862
Location: Rowlett, TX
Post Re: skull mount
This fucking guy.


Thu Sep 05, 2019 9:03 am
Profile
Online
MMT 1000 Club

Joined: Mon Dec 31, 2012 11:07 pm
Posts: 4523
Location: West Monroe, LA
Post Re: skull mount
Lol

#CFFITR
#GhostBoat
#Whoneedsphysicsihaveamudmotor


Thu Sep 05, 2019 10:51 am
Profile
Display posts from previous:  Sort by  
Reply to topic   [ 21 posts ] 

Who is online

Users browsing this forum: No registered users and 8 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: