| MudmotorTalk.com http://www.mudmotortalk.com/mmt_v2/ |
|
| shrimp trawl http://www.mudmotortalk.com/mmt_v2/viewtopic.php?f=8&t=1986 |
Page 1 of 1 |
| Author: | itmsuk2bu [ Fri May 08, 2009 3:08 pm ] |
| Post subject: | shrimp trawl |
has anyone pulled a shrimp trawl behind a mudmotor. i am thinking about trying to pull one and just wondering if anyone had any experience with it. what size trawl do you think a 35hp motor could pull without haveing any problems? |
|
| Author: | jpc014 [ Fri May 22, 2009 8:50 am ] |
| Post subject: | Re: shrimp trawl |
thought about it myself a time or two. i would go with a 16ft, its big enough to catch alot but no too big that the motor won't pull it. just remember you need torque to pull it not speed. |
|
| Author: | jpc014 [ Fri May 22, 2009 9:05 am ] |
| Post subject: | Re: shrimp trawl |
damn double post |
|
| Author: | aucoin [ Fri May 22, 2009 9:13 am ] |
| Post subject: | Re: shrimp trawl |
16' would be max, but you could get into all the lil canals and back bays, if they runnin right, you should mop up |
|
| Author: | T-al [ Thu May 28, 2009 3:41 pm ] |
| Post subject: | Re: shrimp trawl |
I think 16' would work good. Thinking about doing this myself in the marsh. Probably wouldn't be a bad idea to run a worn out prop. It'll let you motor turn up a little giving you a little more torque IMO. With that small of a trawl it's a good idea to have a bib on top. Catch a few big ones that ussually you don't catch in a small trawl. |
|
| Page 1 of 1 | All times are UTC - 6 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|